Systemd/fixme

* calendar time support in timer, iCalendar semantics for the timer stuff (RFC2445)

* implicitly import "defaults" settings file into all types

* add #ifdefs for non-sysv builds

* reinvestigate random seed, hwclock

* "disabled" load state?

* ability to kill services? i.e. in contrast to stopping them, go directly
  into killing mode?

* port over to LISTEN_FDS/LISTEN_PID:

   - uuidd    DONE
   - nscd     DONE
   - dbus     DONE
   - rsyslog  DONE
   - rpcbind (/var/run/rpcbind.sock!) DONE
   - cups     DONE
   - avahi-daemon (/var/run/avahi-daemon/socket) DONE
   - ssh      CLASSIC
   - postfix, saslauthd
   - apache/samba
   - libvirtd (/var/run/libvirt/libvirt-sock-ro)
   - bluetoothd (/var/run/sdp! @/org/bluez/audio!)
   - distccd

* write utmp record a la upstart for processes

* follow property change dbus spec

* selinux policy loading/socket stuff

* systemctl status $PID, systemctl stop $PID!

* place /etc/inittab with explaining blurb.

* vielleicht implizit immer auf syslog dependen?

* debian deadlock when partition set to noauto

* fingerprint.target, wireless.target, gps.target

* set_put(), hashmap_put() return values checken. i.e. == 0 macht kein free()!

* fix merging in .swap units

* pahole

* chkconfig/systemd-install glue

* io priority during initialization

* if a service fails too often, make the service enter maintainence mode, and the socket, too.

External:

* default.target must be %ghosted...

* in %post create all symlinks manually and use inittab data

* default logic for serial getty, ck logging, ssh readahead

* pam: fix double sudo session cleanup:
  http://www.gratisoft.us/bugzilla/show_bug.cgi?id=421

* patch /etc/init.d/functions with:

  if [ $PPID -ne 1 && mountpoint /cgroup/systemd ] ; then echo "You suck!" ; fi

https://bugzilla.redhat.com/show_bug.cgi?id=614245 -- plymouth
https://bugzilla.redhat.com/show_bug.cgi?id=612789 -- umount /cgroup on halt
https://bugzilla.redhat.com/show_bug.cgi?id=612728 -- /etc/rc.d/init.d/functions
https://bugzilla.redhat.com/show_bug.cgi?id=612712 -- pam_systemd
https://bugs.freedesktop.org/show_bug.cgi?id=29193 -- accountsservice
https://bugs.freedesktop.org/show_bug.cgi?id=29194 -- ConsoleKit
https://bugs.freedesktop.org/show_bug.cgi?id=29205 -- udisks
http://article.gmane.org/gmane.linux.bluez.kernel/6479 -- bluez
http://www.spinics.net/lists/linux-nfs/msg14371.html -- rpcbind

Regularly:

* look for close() vs. close_nointr() vs. close_nointr_nofail()

* check for strerror(r) instead of strerror(-r)

* Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel

* %m in printf() instead of strerror();
pam: implement systemd PAM module and generelize cgroup API for that a bit 2010-06-21 23:27:18 +02:00			`* calendar time support in timer, iCalendar semantics for the timer stuff (RFC2445)`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* implicitly import "defaults" settings file into all types`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* add #ifdefs for non-sysv builds`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* reinvestigate random seed, hwclock`
add fixme todo list 2010-01-26 04:19:18 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* "disabled" load state?`
monitor udev for device changes 2010-01-29 06:45:59 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* ability to kill services? i.e. in contrast to stopping them, go directly`
			`into killing mode?`

			`* port over to LISTEN_FDS/LISTEN_PID:`
update fixme 2010-02-05 01:11:01 +01:00
			`- uuidd DONE`
fixme: update fixme a little 2010-02-12 02:02:33 +01:00			`- nscd DONE`
log: handle multi-line log messages properly 2010-05-21 03:31:49 +02:00			`- dbus DONE`
sd-daemon: verify socket family, too 2010-05-21 17:06:40 +02:00			`- rsyslog DONE`
socket: fix parsing of bind_ipv6_only 2010-05-21 23:41:25 +02:00			`- rpcbind (/var/run/rpcbind.sock!) DONE`
			`- cups DONE`
			`- avahi-daemon (/var/run/avahi-daemon/socket) DONE`
fixme: minor updates 2010-02-14 22:45:08 +01:00			`- ssh CLASSIC`
update fixme 2010-02-05 01:11:01 +01:00			`- postfix, saslauthd`
			`- apache/samba`
			`- libvirtd (/var/run/libvirt/libvirt-sock-ro)`
			`- bluetoothd (/var/run/sdp! @/org/bluez/audio!)`
			`- distccd`

unit: add automount units for a number of API filesystems 2010-05-23 01:56:54 +02:00			`* write utmp record a la upstart for processes`

service: optionally call into PAM when dropping priviliges 2010-06-16 21:54:17 +02:00			`* follow property change dbus spec`
unit: add automount units for a number of API filesystems 2010-05-23 01:56:54 +02:00
update fixme 2010-07-21 20:26:44 +02:00			`* selinux policy loading/socket stuff`
systemctl: reimplement systemctl in pure C without Vala/GObject 2010-06-15 02:51:55 +02:00
execute: optionally ignore return status of invoked commands 2010-07-12 02:25:42 +02:00			`* systemctl status $PID, systemctl stop $PID!`
man: update daemon man page a little 2010-07-10 00:49:00 +02:00
exec: extend variable substitution to support splitting variable values into seperate arguments 2010-07-21 02:57:35 +02:00			`* place /etc/inittab with explaining blurb.`
hostname: properly deal with unset hostname in fedora configuration 2010-07-20 21:34:25 +02:00
systemctl: add to command for virtualizing the dependency tree with graphviz 2010-07-16 02:56:00 +02:00			`* vielleicht implizit immer auf syslog dependen?`

update fixme 2010-07-21 20:26:44 +02:00			`* debian deadlock when partition set to noauto`
target: if the user configured a manual ordering between target units and the unit they require don't contradict that automatically 2010-07-16 03:17:34 +02:00
unit: consider only_by_dependency setting when clients ask whether a unit is startable 2010-07-17 04:07:49 +02:00			`* fingerprint.target, wireless.target, gps.target`
systemctl: always show units with active jobs in list-units output 2010-07-16 21:31:34 +02:00
install: optionally remove all symlinks from configuration tree recursively 2010-07-18 01:33:05 +02:00			`* set_put(), hashmap_put() return values checken. i.e. == 0 macht kein free()!`

device: do not merge devices Don't try to merge devices that have been created via dependencies when they appear in the system and can be recognized as the same. Instead, simply continue to maintain them independently of each other, however with the same state cycle. Why? Because otherwise we'd have a hard time to seperate the dependencies after the devices are unplugged again and we hence cannot be sure anymore that next time the device is plugged in it will carry the same names. Example: if one depndency refers to dev-sda.device and another one to dev-by-id-xxxyyy.device we only learn at time of plug in of the device that it is actually the same device that was ment. In the moment the device is unplugged again we won't know anymore their relation to each other and the next time the harddisk is plugged it might even appear as dev-by-id-xxxyyy.device and dev-sdb.service. To ensure the dependencies continue to have the meaning they were intended to have let's hence keep the .device objects seperate all the time, even when they are plugged in. This patch also introduces a new Following= property which points from the various .device units of a specific device to the main .device unit for it. This can be used by the client side to figure out the relation of the .device units to each other and even filter units from display. 2010-07-20 20:33:19 +02:00			`* fix merging in .swap units`

install: optionally remove all symlinks from configuration tree recursively 2010-07-18 01:33:05 +02:00			`* pahole`

update fixme 2010-07-21 20:26:44 +02:00			`* chkconfig/systemd-install glue`

			`* io priority during initialization`
device: do not merge devices Don't try to merge devices that have been created via dependencies when they appear in the system and can be recognized as the same. Instead, simply continue to maintain them independently of each other, however with the same state cycle. Why? Because otherwise we'd have a hard time to seperate the dependencies after the devices are unplugged again and we hence cannot be sure anymore that next time the device is plugged in it will carry the same names. Example: if one depndency refers to dev-sda.device and another one to dev-by-id-xxxyyy.device we only learn at time of plug in of the device that it is actually the same device that was ment. In the moment the device is unplugged again we won't know anymore their relation to each other and the next time the harddisk is plugged it might even appear as dev-by-id-xxxyyy.device and dev-sdb.service. To ensure the dependencies continue to have the meaning they were intended to have let's hence keep the .device objects seperate all the time, even when they are plugged in. This patch also introduces a new Following= property which points from the various .device units of a specific device to the main .device unit for it. This can be used by the client side to figure out the relation of the .device units to each other and even filter units from display. 2010-07-20 20:33:19 +02:00
systemctl: accept -p more than once 2010-07-23 05:24:05 +02:00			`* if a service fails too often, make the service enter maintainence mode, and the socket, too.`

unit: add new abstracted maintenance state for units 2010-07-01 00:31:53 +02:00			`External:`
systemctl: provide compatibility implementations for various sysv utilities 2010-06-17 22:57:28 +02:00
systemctl: warn when operating on service files that changed on disk but haven't been reloaded 2010-07-17 00:57:51 +02:00			`* default.target must be %ghosted...`

			`* in %post create all symlinks manually and use inittab data`

			`* default logic for serial getty, ck logging, ssh readahead`

update fixme 2010-07-21 20:26:44 +02:00			`* pam: fix double sudo session cleanup:`
			`http://www.gratisoft.us/bugzilla/show_bug.cgi?id=421`

service: honour empty cgroup even in ValidNoProcess mode 2010-06-19 01:06:09 +02:00			`* patch /etc/init.d/functions with:`

			`if [ $PPID -ne 1 && mountpoint /cgroup/systemd ] ; then echo "You suck!" ; fi`

update fixme 2010-07-21 20:26:44 +02:00			`https://bugzilla.redhat.com/show_bug.cgi?id=614245 -- plymouth`
			`https://bugzilla.redhat.com/show_bug.cgi?id=612789 -- umount /cgroup on halt`
			`https://bugzilla.redhat.com/show_bug.cgi?id=612728 -- /etc/rc.d/init.d/functions`
			`https://bugzilla.redhat.com/show_bug.cgi?id=612712 -- pam_systemd`
			`https://bugs.freedesktop.org/show_bug.cgi?id=29193 -- accountsservice`
			`https://bugs.freedesktop.org/show_bug.cgi?id=29194 -- ConsoleKit`
update fixme 2010-07-22 02:26:27 +02:00			`https://bugs.freedesktop.org/show_bug.cgi?id=29205 -- udisks`
			`http://article.gmane.org/gmane.linux.bluez.kernel/6479 -- bluez`
update fixme 2010-07-21 20:26:44 +02:00			`http://www.spinics.net/lists/linux-nfs/msg14371.html -- rpcbind`
fixme: refer to rhbz bugs that need fixing 2010-07-14 15:13:34 +02:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`Regularly:`
fixme: minor updates 2010-02-14 22:45:08 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* look for close() vs. close_nointr() vs. close_nointr_nofail()`
fixme: minor update 2010-02-14 22:47:08 +01:00
fixme: update todo list 2010-05-16 01:49:45 +02:00			`* check for strerror(r) instead of strerror(-r)`
service: optionally call into PAM when dropping priviliges 2010-06-16 21:54:17 +02:00
			`* Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel`
pam: implement systemd PAM module and generelize cgroup API for that a bit 2010-06-21 23:27:18 +02:00
			`* %m in printf() instead of strerror();`