If we're using a set with _put_strdup(), most of the time we want to use
string hash ops on the set, and free the strings when done. This defines
the appropriate a new string_hash_ops_free structure to automatically free
the keys when removing the set, and makes set_put_strdup() and set_put_strdupv()
instantiate the set with those hash ops.
hashmap_put_strdup() was already doing something similar.
(It is OK to instantiate the set earlier, possibly with a different hash ops
structure. set_put_strdup() will then use the existing set. It is also OK
to call set_free_free() instead of set_free() on a set with
string_hash_ops_free, the effect is the same, we're just overriding the
override of the cleanup function.)
No functional change intended.
This function had two users (apart from tests), and both only used one
argument. And it seems likely that if we need to pass more directories,
either the _nulstr() or the _strv() form would be used. Let's simplify
the code.
prefix_root() is equivalent to path_join() in almost all ways, hence
let's remove it.
There are subtle differences though: prefix_root() will try shorten
multiple "/" before and after the prefix. path_join() doesn't do that.
This means prefix_root() might return a string shorter than both its
inputs combined, while path_join() never does that. I like the
path_join() semantics better, hence I think dropping prefix_root() is
totally OK. In the end the strings generated by both functon should
always be identical in terms of path_equal() if not streq().
This leaves prefix_roota() in place. Ideally we'd have path_joina(), but
I don't think we can reasonably implement that as a macro. or maybe we
can? (if so, sounds like something for a later PR)
Also add in a few missing OOM checks
The function to replacement paths into the configuration file list was borked.
Apart from the crash with empty root prefix, it would incorrectly handle the
case where root *was* set, and the replacement file was supposed to override
an existing file.
prefix_root is used instead of path_join because prefix_root removes duplicate
slashes (when --root=dir/ is used).
A test is added.
Fixes#11124.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This is mostly fall-out from d1a1f0aaf0,
however some cases are older bugs.
There might be more issues lurking, this was a simple grep for "%m"
across the tree, with all lines removed that mention "errno" at all.
This adds fozr new flags:
- If CONF_FILES_DIRECTORY is specified conf_file_list() and friends
will look for directories only.
- Similar CONF_FILES_REGULAR means we'll look only for regular files.
- If CONF_FILES_BASENAME is specified the resulting list will contain
only the basenames of all discovered files or directories, not the
full paths.
- If CONF_FILES_FILTER_MASKED is specified the resulting list will have
masked entries removed (i.e. those symlinked to /dev/null and
suchlike)
These four flags are useful for discovering portable service profile
information.
While we are at it, also improve a couple of other things:
- More debug logging
- use path_hash_ops instead of string_hash_ops when putting together the
path lists
Previously we were a bit sloppy with the index and size types of arrays,
we'd regularly use unsigned. While I don't think this ever resulted in
real issues I think we should be more careful there and follow a
stricter regime: unless there's a strong reason not to use size_t for
array sizes and indexes, size_t it should be. Any allocations we do
ultimately will use size_t anyway, and converting forth and back between
unsigned and size_t will always be a source of problems.
Note that on 32bit machines "unsigned" and "size_t" are equivalent, and
on 64bit machines our arrays shouldn't grow that large anyway, and if
they do we have a problem, however that kind of overly large allocation
we have protections for usually, but for overflows we do not have that
so much, hence let's add it.
So yeah, it's a story of the current code being already "good enough",
but I think some extra type hygiene is better.
This patch tries to be comprehensive, but it probably isn't and I missed
a few cases. But I guess we can cover that later as we notice it. Among
smaller fixes, this changes:
1. strv_length()' return type becomes size_t
2. the unit file changes array size becomes size_t
3. DNS answer and query array sizes become size_t
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76745
This implements similar logic as conf_files_cat(), but with slightly different
file gathering logic. I also want to add support for replacement files later on,
so it seems better to keep those two file-gathering functions separate.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
When used in a package installation script, we want to invoke systemd-sysusers
before that package is installed (so it can contain files owned by the newly
created user), so the configuration to use is specified on the command
line. This should be a copy of the configuration that will be installed as
/usr/lib/sysusers.d/package.conf. We still want to obey any overrides in
/etc/sysusers.d or /run/sysusers.d in the usual fashion. Otherwise, we'd get a
different result when systemd-sysusers is run with a copy of the new config on
the command line and when systemd-sysusers is run at boot after package
instalation. In the second case any files in /etc or /run have higher priority,
so the same should happen when the configuration is given on the command line.
More generally, we want the behaviour in this special case to be as close to
the case where the file is finally on disk as possible, so we have to read all
configuration files, since they all might contain overrides and additional
configuration that matters. Even files that have lower priority might specify
additional groups for the user we are creating. Thus, we need to read all
configuration, but insert our new configuration somewhere with the right
priority.
If --target=/path/to/file.conf is given on the command line, we gather the list
of files, and pretend that the command-line config is read from
/path/to/file.conf (doesn't matter if the file on disk actually exists or
not). All package scripts should use this option to obtain consistent and
idempotent behaviour.
The corner case when --target= is specified and there are no positional
arguments is disallowed.
v1:
- version with --config-name=
v2:
- disallow --config-name= and no positional args
v3:
- remove --config-name=
v4:
- add --target= and rework the code completely
v5:
- fix argcounting bug and add example in man page
v6:
- rename --target to --replace
5dd11ab5f3 did a similar change for conf_files_list_strv().
Here we do the same for conf_files_list() and conf_files_list_nulstr().
No change for existing users. Tests are added.
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.