We must have the error number around when completing the transaction.
Let's hence make sure we always initialize it *first* (we accidentally
did it once after).
Fixes: #11626
This allows us to later port nss-resolve to use Varlink rather than
D-Bus for resolution. This has the benefit that nss-resolve based
resoluton works even without D-Bus being up. And it's faster too.
It's strictly bus-specific, hence let's move this to resolved-bus.c like
the rest of the bus specific logic.
This is also in preparation for adding an alternative varlink transport,
which needs similar functionality, but varlink instead of bus-specific.
Let's prepare for adding a new varlink interface, and thus rename the
"request" field to "bus_request", so that we can later add a
varlink_request field too.
glibc 2.26 lifted restrictions on search domains count or length to
unlimited. This has also been backported to 2.17 in some distributions (RHEL 7
and derivatives). Other softwares may have their own limits for search domains,
but we should not restrict what is written out any more.
https://sourceware.org/legacy-ml/libc-announce/2017/msg00001.html
This is mostly cosmetic, but let's reorder the destructors so that
we do the final sd_notify() call before we run the destructor for
the manager object.
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.
Presently, CLI utilities such as systemctl will check whether they have a tty
attached or not to decide whether to parse /proc/cmdline or EFI variable
SystemdOptions looking for systemd.log_* entries.
But this check will be misleading if these tools are being launched by a
daemon, such as a monitoring daemon or automation service that runs in
background.
Make log handling of CLI tools uniform by never checking /proc/cmdline or EFI
variables to determine the logging level.
Furthermore, introduce a new log_setup_cli() shortcut to set up common options
used by most command-line utilities.
Patch contains a coccinelle script, but it only works in some cases. Many
parts were converted by hand.
Note: I did not fix errors in return value handing. This will be done separate
to keep the patch comprehensible. No functional change is intended in this
patch.
Access to bit fields is less efficient, and since the Manager is a singleton,
a byte or two of space in the structure doesn't matter at all. (And in this
particular case, because of alignment issues, we wouldn't save anything
anyway.)
This makes the output more predictable. Also, interesting interfaces
are often the low-numbered ones (actual hardware links, not virtual
devices stacked on top), and this makes them more visible.
Those lists are very long and use up a significant chunk of screen real estate.
But the contents are mostly static (usually they just reflect built-in
configuration). Let's just not show them in 'status' output. They can still
be viewed with 'nta' verb.
This is a follow-up for 9f83091e3c.
Instead of reading the mtime off the configuration files after reading,
let's do so before reading, but with the fd we read the data from. This
is not only cleaner (as it allows us to save one stat()), but also has
the benefit that we'll detect changes that happen while we read the
files.
This also reworks unit file drop-ins to use the common code for
determining drop-in mtime, instead of reading system clock for that.
We ask for the TTL, then have enough space for it.
We probably can drop the extra cmsg space now, but let's figure that out
another time, since the extra cmsg space is used elsewhere in resolved
as well.
Resolved can't reliably determine on whether "it makes sense" to query
AAAA records when not explicitly specifying it in the request, so we
shouldn't remove them.
After having done the resolving, applications can use RFC6724 to
determine whether that address is reachable.
We can't know whether an address is reachable before having resolved it
and inspecting the routing table, and not resolving AAAA just because
there's no IPv6 default route on the main interface link them breaks
various setups, including IPv6-providing wireguard tunnels on a
non-dualstacked environment.
Fixes#5782Fixes#5915Fixes#8017
This also makes sure the control buffer is properly aligned. This
matters, as otherwise the control buffer might not be aligned and the
cmsg buffer counting might be off. The incorrect alignment is becoming
visible by using recvmsg_safe() as we suddenly notice the MSG_CTRUNC bit
set because of this.
That said, apparently this isn't enough to make this work on all
kernels. Since I couldn't figure this out, we now add 1K to the buffer
to be sure. We do this once already, also for a pktinfo structure
(though an IPv4/IPv6) one. I am puzzled by this, but this shouldn't
matter much. it works locally just fine, except for those ubuntu CI
kernels...
While we are at it, make some other changes too, to simplify and
modernize the function.
We always need to make them unions with a "struct cmsghdr" in them, so
that things properly aligned. Otherwise we might end up at an unaligned
address and the counting goes all wrong, possibly making the kernel
refuse our buffers.
Also, let's make sure we initialize the control buffers to zero when
sending, but leave them uninitialized when reading.
Both the alignment and the initialization thing is mentioned in the
cmsg(3) man page.
We need to use the CMSG_SPACE() macro to size the control buffers, not
CMSG_LEN(). The former is rounded up to next alignment boundary, the
latter is not. The former should be used for allocations, the latter for
encoding how much of it is actually initialized. See cmsg(3) man page
for details about this.
Given how confusing this is, I guess we don't have to be too ashamed
here, in most cases we actually did get this right.
If we're using a set with _put_strdup(), most of the time we want to use
string hash ops on the set, and free the strings when done. This defines
the appropriate a new string_hash_ops_free structure to automatically free
the keys when removing the set, and makes set_put_strdup() and set_put_strdupv()
instantiate the set with those hash ops.
hashmap_put_strdup() was already doing something similar.
(It is OK to instantiate the set earlier, possibly with a different hash ops
structure. set_put_strdup() will then use the existing set. It is also OK
to call set_free_free() instead of set_free() on a set with
string_hash_ops_free, the effect is the same, we're just overriding the
override of the cleanup function.)
No functional change intended.
Let's be extra careful whenever we return from recvmsg() and see
MSG_CTRUNC set. This generally means we ran into a programming error, as
we didn't size the control buffer large enough. It's an error condition
we should at least log about, or propagate up. Hence do that.
This is particularly important when receiving fds, since for those the
control data can be of any size. In particular on stream sockets that's
nasty, because if we miss an fd because of control data truncation we
cannot recover, we might not even realize that we are one off.
(Also, when failing early, if there's any chance the socket might be
AF_UNIX let's close all received fds, all the time. We got this right
most of the time, but there were a few cases missing. God, UNIX is hard
to use)
It's not that I think that "hostname" is vastly superior to "host name". Quite
the opposite — the difference is small, and in some context the two-word version
does fit better. But in the tree, there are ~200 occurrences of the first, and
>1600 of the other, and consistent spelling is more important than any particular
spelling choice.
When the stub listener is disabled, stub-resolv.conf is useless. Instead of
warning about this, let's just make stub-resolv.conf point to the private
resolv.conf file. (The original bug report asked for "mirroring", but I think
a symlink is nicer than a copy because it is easier to see that a redirection
was made.)
Fixes#14700.
All callers ignore the return value.
This is almost entirely theoretical, since writing to /run is unlikely to
fail..., but the user is almost certainly better off keeping the old copy
around and having working dns resolution with an out-of-date dns server list
than having having a dangling /etc/resolv.conf symlink.
An error with a full path is immediately clear. OTOH, a user might not be
familiar with concenpt like "private resolv.conf".
I opted to use %s-formatting for the path, because the code is much easier to
read this way. Any difference in t speed of execution is not important.
This is useful to raise the log level for a single transaction or a few,
without affecting other state of the resolved as a restart would.
The log level can only be set, I didn't bother with having the ability
to restore the original as in pid1.
There are legitimate reasons to access the file directly, as currently
discussed on fedora-devel. Hence tone things down from "must" to "should
typically not".
Also, let's use fputs() instead of fputs_unlocked() here,
fopen_temporary_label() turns off stdio locking anyway for the whole
FILE*, hence no need to do this manually each time.
On certain distributions such as NixOS the mtime of `/etc/hosts` is
locked to a fixed value. In such cases, only checking the last mtime of
`/etc/hosts` is not enough - we also need to check if the st_ino/st_dev
match up. Thus, let's make sure make sure that systemd-resolved also
rereads `/etc/hosts` if the inode or the device containing `/etc/hosts` changes.
Test script:
```bash
hosts="/etc/hosts"
echo "127.0.0.1 testpr" > "hosts_new"
mv "hosts_new" "$hosts"
resolvectl query testpr || exit 1
mtime="$(stat -c %y "$hosts")"
echo "127.0.0.1 newhost" > "hosts_tmp"
touch -d "$mtime" "hosts_tmp"
install -p "hosts_tmp" "$hosts"
sleep 10
resolvectl query newhost || exit 1
rm -f "hosts_tmp"
```
Closes#14456.
Widely accepted certificates for IP addresses are expensive and only
affordable for larger organizations. Therefore if the user provides
the hostname in the DNS= option, we should use it instead of the IP
address.
Section 6.2 of RFC4034 requires that "all uppercase US-ASCII letters in
the DNS names contained within the RDATA are replaced by the corresponding
lowercase US-ASCII letters" for a long list of RR types.
Fixes#14891
In subsequent commits, calls to if_nametoindex() will be replaced by a wrapper
that falls back to alternative name resolution over netlink. netlink support
requires libsystemd (for sd-netlink), and we don't want to add any functions
that require netlink in basic/. So stuff that calls if_nametoindex() for user
supplied interface names, and everything that depends on that, needs to be
moved.
We don't need a seperate output parameter that is of type int. glibc() says
that the type is "unsigned", but the kernel thinks it's "int". And the
"alternative names" interface also uses ints. So let's standarize on ints,
since it's clearly not realisitic to have interface numbers in the upper half
of unsigned int range.
If a daemon is not started as root, most likely it also can't create its
directory and let's not try to resolve the user in that case either.
Create /run/systemd/netif/lldp with tmpfiles.d like other netif directories.
This is also very helpful for preparing a RootImage for the daemons as NSS crud
is not needed.
This cleans up and unifies the outut of --help texts a bit:
1. Highlight the human friendly description string, not the command
line via ANSI sequences. Previously both this description string and
the brief command line summary was marked with the same ANSI
highlight sequence, but given we auto-page to less and less does not
honour multi-line highlights only the command line summary was
affectively highlighted. Rationale: for highlighting the description
instead of the command line: the command line summary is relatively
boring, and mostly the same for out tools, the description on the
other hand is pregnant, important and captions the whole thing and
hence deserves highlighting.
2. Always suffix "Options" with ":" in the help text
3. Rename "Flags" → "Options" in one case
4. Move commands to the top in a few cases
5. add coloring to many more help pages
6. Unify on COMMAND instead of {COMMAND} in the command line summary.
Some tools did it one way, others the other way. I am not sure what
precisely {} is supposed to mean, that uppercasing doesn't, hence
let's simplify and stick to the {}-less syntax
And minor other tweaks.
Validate the IP address in the certificate for DNS-over-TLS in strict mode when GnuTLS is used. As this is not yet the case in contrast to the documentation.
Increase the required version to ensure TLS 1.3 is always supported when using GnuTLS for DNS-over-TLS and allow further changes to use recent API additions.
Notifications are only sent for the top object, and not for individual
links. This should be enough for the most obvious cases where somebody
just cares about the effective set of servers.
Fixes#13721.
