For users, the square brackets already serve as markup and clearly delineate
the section name from surrounding text. Putting additional markup around that
only adds clutter. Also, we were very inconsistent in using the quotes. Let's
just drop them altogether.
If an entry in fstab uses "x-systemd.automount" option and also asks for
additionnal dependencies via x-systemd.requires or such, then the dependencies
were applied to the automount unit.
But this unlikely to do the right thing and is inconsistent with what's done
for network mounts.
Indeed when an fstab entries has "_netdev,x-systemd.automount" options, the
dependencies against the network requested by "_netdev" are (correctly) applied
to the mount unit only and the automount unit remains ordered against
local-fs.target.
The same logic should be followed when extra deps are specified via the mount
options as automount units should always be ordered against local-fs.target.
Note: in general explicit deps specified via mount options should be used with
care and should be used to specify dependencies on other mount units only as it
can easily create ordering cycles otherwise like it's been seen in
https://github.com/systemd/systemd-stable/issues/69. Mount units (as well as
automount ones) are ordered before local-fs.target by default which is a
low-level target that most other units depend on.
I wasn't 100% convinced that this is the right thing to do, hence the separate
commit. But e.g. for paths we index all mentions, so I think it's reasonable to
do the same here.
Teaches systemd-fstab-generator these two unit options,
creating appropriate dependencies on the generated .mount
units. When used, they override any other automatically
generated dependencies, such as local-fs.target, and are
NOT suppressed by noauto. The new options are ignored for
/, in the same way that noauto is ignored.
Fixes: #14380
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Old text:
> Note that the User= and
> Group= options are not particularly useful for mount units specifying a
> "Type=" option or using configuration not specified in /etc/fstab;
> mount(8) will refuse options that are not listed in /etc/fstab if it is
> not run as UID 0.
However I recently learnt the following:
> The mount program does not read the /etc/fstab file if both device
> and dir are specified.
Therefore, if both device and dir are specified, the `user` or `users`
options in `fstab` will not have any effect. Run as a normal user,
you will always see
mount: only root can do that
Fix the explanation in the man page.
Also make sure to markup User= and Group= with <varname>.
Systemd services are permitted to be scripts, as well as binary
executables.
The same also applies to the underlying /sbin/mount and /sbin/swapon.
It is not necessary for the user to consider what type of program file
these are. Nor is it necessary with systemd-nspawn, to distinguish between
init as a "binary" v.s. a user-specified "program".
Also fix a couple of grammar nits in the modified sentences.
This has a long history; see see 5261ba9018
which originally introduced the behavior. Unfortunately that commit
doesn't include any rationale, but IIRC the basic issue is that
systemd wants to model the real mount state as units, and symlinks
make canonicalization much more difficult.
At the same time, on a RHEL6 system (upstart), one can make e.g. `/home` a
symlink, and things work as well as they always did; but one doesn't have
access to the sophistication of mount units (dependencies, introspection, etc.)
Supporting symlinks here will hence make it easier for people to do upgrades to
RHEL7 and beyond.
The `/home` as symlink case also appears prominently for OSTree; see
https://ostree.readthedocs.io/en/latest/manual/adapting-existing/
Further work has landed in the nspawn case for this; see e.g.
d944dc9553
A basic limitation with doing this in the fstab generator (and that I hit while
doing some testing) is that we obviously can't chase symlinks into mounts,
since the generator runs early before mounts. Or at least - doing so would
require multiple passes over the fstab data (as well as looking at existing
mount units), and potentially doing multi-phase generation. I'm not sure it's
worth doing that without a real world use case. For now, this will fix at least
the OSTree + `/home` <https://bugzilla.redhat.com/show_bug.cgi?id=1382873> case
mentioned above, and in general anyone who for whatever reason has symlinks in
their `/etc/fstab`.
When "bg" is specified for NFS mounts, and if the server is
not accessible, two behaviors are possible depending on networking
details.
If a definitive error is received, such a EHOSTUNREACH or ECONNREFUSED,
mount.nfs will fork and continue in the background, while /bin/mount
will report success.
If no definitive error is reported but the connection times out
instead, then the mount.nfs timeout will normally be longer than the
systemd.mount timeout, so mount.nfs will be killed by systemd.
In the first case the mount has appeared to succeed even though
it hasn't. This can be confusing. Also the background mount.nfs
will never get cleaned up, even if the mount unit is stopped.
In the second case, mount.nfs is killed early and so the mount will
not complete when the server comes back.
Neither of these are ideal.
This patch modifies the options when an NFS bg mount is detected to
force an "fg" mount, but retain the default "retry" time of 10000
minutes that applies to "bg" mounts.
It also imposes "nofail" behaviour and sets the TimeoutSec for the
mount to "infinity" so the retry= time is allowed to complete.
This provides near-identical behaviour to an NFS bg mount started directly
by "mount -a". The only difference is that systemd will not wait for
the first mount attempt, while "mount -a" will.
Fixes#6046
Currently fstab entries with 'nofail' option are mounted
asynchronously and there is no way how to specify dependencies
between such fstab entry and another units. It means that
users are forced to write additional dependency units manually.
The patch introduces new systemd fstab options:
x-systemd.before=<PATH>
x-systemd.after=<PATH>
- to specify another mount dependency (PATH is translated to unit name)
x-systemd.before=<UNIT>
x-systemd.after=<UNIT>
- to specify arbitrary UNIT dependency
For example mount where A should be mounted before local-fs.target unit:
/dev/sdb1 /mnt/test/A none nofail,x-systemd.before=local-fs.target
Since commit 9d06297, mount units from mountinfo are not bound to their devices
anymore (they use the "Requires" dependency instead).
This has the following drawback: if a media is mounted and the eject button is
pressed then the media is unconditionally ejected leaving some inconsistent
states.
Since udev is the component that is reacting (no matter if the device is used
or not) to the eject button, users expect that udev at least try to unmount the
media properly.
This patch introduces a new property "SYSTEMD_MOUNT_DEVICE_BOUND". When set on
a block device, all units that requires this device will see their "Requires"
dependency upgraded to a "BindTo" one. This is currently only used by cdrom
devices.
This patch also gives the possibility to the user to restore the previous
behavior that is bind a mount unit to a device. This is achieved by passing the
"x-systemd.device-bound" option to mount(8). Please note that currently this is
not working because libmount treats the x-* options has comments therefore
they're not available in utab for later application retrievals.
This adds a new systemd fstab option x-systemd.mount-timeout. The option
adds a timeout value that specifies how long systemd waits for the mount
command to finish. It allows to mount huge btrfs volumes without issues.
This is equivalent to adding option TimeoutSec= to [Mount] section in a
mount unit file.
fixes#4055
Yu Watanabe