As interfaces will be reconfigured asynchronously after `networkctl reload`.
So, right after `networkctl reload` is finished, interfaces may be still
in 'configured' state with the old .network files.
Fixes#17533
The memory pressure values of the units in TEST-56-OOMD seemed to be a
lot lower after updating to linux 5.9. This is likely due to a fix from
e22c6ed90a.
To account for this, I lowered memory.high on testbloat.service to
throttle it even more. This was enough to generate the 50%+ value to trigger
oomd for the test, but as an extra precaution I also lowered the oomd
threshold to 1% so it's certain to try and kill testbloat.service.
They are not really boolean, because we have both ipv4 and ipv6, but
for each protocol we have either unset, no, and yes.
From https://github.com/systemd/systemd/issues/13316#issuecomment-582906817:
LinkLocalAddressing must be a boolean option, at least for ipv4:
- LinkLocalAddressing=no => no LL at all.
- LinkLocalAddressing=yes + Static Address => invalid configuration, warn and
interpret as LinkLocalAddressing=no, no LL at all.
(we check that during parsing and reject)
- LinkLocalAddressing=yes + DHCP => LL process should be subordinated to the
DHCP one, an LL address must be acquired at start or after a short N
unsuccessful DHCP attemps, and must not stop DHCP to keeping trying. When a
DHCP address is acquired, drop the LL address. If the DHCP address is lost,
re-adquire a new LL address.
(next patch will move in this direction)
- LinkLocalAddressing=fallback has no reason to exist, because LL address must
always be allocated as a fallback option when using DHCP. Having both DHCP
and LL address at the same time is an RFC violation, so
LinkLocalAdressing=yes correctly implemented is already the "fallback"
behavior. The fallback option must be deprecated and if present in older
configs must be interpreted as LinkLocalAddressing=yes.
(removed)
- And for IPv6, the LinkLocalAddress option has any sense at all? IPv6-LL
address aren't required to be always set for every IPv6 enabled interface (in
this case, coexisting with static or dynamic address if any)? Shouldn't be
always =yes?
(good question)
This effectively reverts 29e81083bd. There is no
special "fallback" mode now, so the check doesn't make sense anymore.
The systemd-user file has been moved from /etc/pam.d into /usr/lib/pam.d,
so test-functions needs to copy it from /usr/lib/pam.d instead.
This will copy it from either location.
In Fedora rawhide various perl modules are now available as separate
packages that are not pulled in by dependencies. If we don't have some
package, skip the tests.
This ugly code is apparently the way to do conditional imports:
https://www.cs.ait.ac.th/~on/O/oreilly/perl/cookbook/ch12_03.htm.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
Closes#10355
Co-author: Anita Zhang <the.anitazha@gmail.com>
umount emits an error message "no mount point specified" if the
tmpfs isn't mounted yet, which is the normal case.
Suppress that by redirecting stderr.
Script for generating LOTS of SCSI disk and partition devices in
the fake sysfs we use for udev testing.
This script is supposed to be run after sys-script.py. It uses
code from sys-script.py as template to generate additional SCSI disk data
structures. Together with the "generator" code in udev-test.pl
added in the previous patch, it allows to run udev tests with almost
arbitrarily many devices, and thus to do performance scaling tests.
Manually listing all devices in the test definition becomes cumbersome with
lots of devices. Add a function that scans on all block devices in
the test sysfs and generates a list of devices to test.
Add 4 new tests using multiple devices. Number 2-4 use many
devices claiming the same symlink, where only one device has
a higher priority thatn the others. They fail sporadically with
the current code, if a race condition causes the symlink to point
to the wrong device. Test 4 is like test 2 with sleeps in between,
it's much less likely to fail.
the "last_rule" option hasn't been supported for some time.
Therefore this test fails if a "not_exp_links" attribute is added,
as it should be. Mark it appropriately.
Instead of testing the existence or non-exisitence of just a single
symlink, allow testing of several links per device.
Change the test definitions accordingly.
Test if symlinks are created correctly by comparing the symlink
targets to the devnode path. This implies (for the symlink) that
major/minor numbers and permissions are correct, as we have tested
that on the devnode already.
More often than not, the created devnode is the basename of the
sysfs entry. The "devnode" device may be used to override the
auto-detected node name.
Permissions and major/minor number are now verified on the devnode
itself, not on symlinks.
For those tests where exp_name is set to the computed devnode name,
the explicit "exp_name" can be removed. "exp_name" is only required for
symlinks.
This allows separate testing for devnodes and symlinks an a follow-up
patch.
Allow testing cases where multiple devices are added and removed
simultaneously. Tests are started as synchronously as possible using a
semaphore, in order to test possible race conditions. If this isn't desired,
the test parameter "sleep_us" can be set to the number of microseconds to wait
between udev invocations.
Allow testing cases where multiple devices are added and removed.
This implies a change of the data structure: every test allows
for multiple devices to be added, and "exp_name" etc. are now properties
of the device, not of the test.
The link state file is always removed when networkd is stopping. So,
the deserialization logic does not work. Moreover, the ADDRESSES=
entry is not used by sd-network, so serialization is also not necessary.
The test sometimes fails, e.g. in bionic-s390x ci. I think it might be because
the service binary exits before we get a chance to notice that it is running:
13:59:31 --- Listing only the last 100 lines from a long log. ---
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4639845)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4539608)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4439376)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4338946)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4238702)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4138424)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4038116)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3937835)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3837553)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3737250)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3636934)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3536622)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3436318)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3336021)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3235730)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3135468)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3035158)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2934855)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2834541)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2732511)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2632255)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2532014)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2431746)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2331438)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2231213)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2130952)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2030663)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1930428)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1830172)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1729906)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1629652)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1529368)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1429110)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1328852)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1228593)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1128320)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1028083)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 927824)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 827564)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 724935)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 624664)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 524411)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 424124)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 323853)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 223585)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 120356)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 18053)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: -82385)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 Test timeout when testing path-unit.path
It seems test/test-path/path-service.service wasn't actually used for anything.
Ubuntu CI's just got the dependencies require dto run this test added,
and it seems the build is different enough from other platforms
that it fails to create the required directories:
cp: cannot create regular file '/var/tmp/systemd-test.JJMOBY/minimal/usr/lib/os-release': No such file or directory
It looks like we need to do some whack-a-mole before it will fully pass,
so disable for now. It was skipped until today anyway due to missing
dependencies.
Before this commit, event when Gateway=_dhcp4 or _ra is set, the
route was configured with 'protocol static', and other properties
specified by RouteTable=, RouteMTU=, or etc, were ignored.
This commit makes set the route protocol based on the protocol the
gateway address is obtained, and apply other settings if it is not
explicitly specified in the [Route] section.
We usually disable IPv6AcceptRA= if the test does not require any
dynamic address configuration, as it makes slightly slow down the test.
C.f. 491b79aeac.
Also, even if login.defs are not present, don't start allocating at 1, but at
SYSTEM_UID_MIN.
Fixes#9769.
The test is adjusted. Actually, it was busted before, because sysusers would
never use SYSTEM_GID_MIN, so if SYSTEM_GID_MIN was different than
SYSTEM_UID_MIN, the tests would fail. On all "normal" systems the two are
equal, so we didn't notice. Since sysusers now always uses the minimum of the
two, we only need to substitute one value.
We were looking at ${f%.*}, i.e. the $f with any suffix starting with a dot removed.
This worked fine for paths like /some/path/test-11.input. It also worked
for paths like /some/path/inline (there were no dots, so we got $f back unscathed).
But in the ubuntu CI the package is built in a temporary directory like
/tmp/autopkgtest-lxc.nnnfqb26/downtmp/build.UfW/ (yes, it has a dot, even two.).
That still worked for the first case, but in the second case we truncated things
after the first dot, and we would try to get
/tmp/autopkgtest-lxc.nnnfqb26/downtmp/build and try to load
/tmp/autopkgtest-lxc.nnnfqb26/downtmp/build.expected-password, which obviously
didn't work as expected. To avoid this issue, do the suffix removal only when
we know that there really is a suffix.
A second minor issue was that we would try to copy $1.expected-*, and sometimes
$1 would be given, and sometimes not. Effectively we were relying on there
not being any files matching .expected-*. There weren't any such files, but let's
avoid this ugliness and always pass $1.
All this test does is manipulate text files in a subdir specified with --testroot.
It can be a normal unittest without the overhead of creating a machine image.
As a bonus, also test the .standalone version.
When tests are executed serially (the default), it seems better to launch
the fairly generic test that runs the unittests early in the sequence.
Right now the tests are ordered based on when they were written, but
this doesn't make much sense.
We need to include ninja-build in the packages list because meson doesn't
depend on it (because it supports other backends too).
Also drop xz-devel, it's not crucial for the test.
Luca Boccassi