They are not really boolean, because we have both ipv4 and ipv6, but
for each protocol we have either unset, no, and yes.
From https://github.com/systemd/systemd/issues/13316#issuecomment-582906817:
LinkLocalAddressing must be a boolean option, at least for ipv4:
- LinkLocalAddressing=no => no LL at all.
- LinkLocalAddressing=yes + Static Address => invalid configuration, warn and
interpret as LinkLocalAddressing=no, no LL at all.
(we check that during parsing and reject)
- LinkLocalAddressing=yes + DHCP => LL process should be subordinated to the
DHCP one, an LL address must be acquired at start or after a short N
unsuccessful DHCP attemps, and must not stop DHCP to keeping trying. When a
DHCP address is acquired, drop the LL address. If the DHCP address is lost,
re-adquire a new LL address.
(next patch will move in this direction)
- LinkLocalAddressing=fallback has no reason to exist, because LL address must
always be allocated as a fallback option when using DHCP. Having both DHCP
and LL address at the same time is an RFC violation, so
LinkLocalAdressing=yes correctly implemented is already the "fallback"
behavior. The fallback option must be deprecated and if present in older
configs must be interpreted as LinkLocalAddressing=yes.
(removed)
- And for IPv6, the LinkLocalAddress option has any sense at all? IPv6-LL
address aren't required to be always set for every IPv6 enabled interface (in
this case, coexisting with static or dynamic address if any)? Shouldn't be
always =yes?
(good question)
This effectively reverts 29e81083bd. There is no
special "fallback" mode now, so the check doesn't make sense anymore.
This passes the legacy ethernet address to functions in a lot of places,
which all will need migrated to handle arbitrary size hardware addresses
eventually.
The link state file is always removed on stop. So, we cannot deserialize
the address from the file. Moreover, currently the IPv4 link-local address
is always dropped by link_drop_foreign_addresses() on restart. Let's
drop the serialize/deserialize logic for IPv4 LL address.
When nspawn container with private network starts, networkd creates
the default route for the interface. The route may cause problem on
the host side, and it can be created with DefaultRouteOnDevice= now.
Hence, this makes networkd not create the route implicitly any more.
Closes#13418.
Some path of configuring address, route or etc., go to failed state, but
some do not. E.g., failure in address configuration which is provided by
DHCPv4 goes to failed state, but static address does not.
This is just for consistency. This should not change anything if
everything is fine.
This also voidify manager_rtnl_process_address().
This is for 6d36464065. It turns out that this is causing more problems than
expected. Let's retroactively introduce naming scheme v241 to conditionalize
this change.
Follow-up for #12792 and 6d36464065. See also
https://bugzilla.suse.com/show_bug.cgi?id=1136600.
$ SYSTEMD_LOG_LEVEL=debug NET_NAMING_SCHEME=v240 build/udevadm test-builtin net_setup_link /sys/class/net/br11
$ SYSTEMD_LOG_LEVEL=debug NET_NAMING_SCHEME=v241 build/udevadm test-builtin net_setup_link /sys/class/net/br11
...
@@ -20,11 +20,13 @@
link_config: could not set ethtool features for br11
Could not set offload features of br11: Operation not permitted
br11: Device has name_assign_type=3
-Using interface naming scheme 'v240'.
+Using interface naming scheme 'v241'.
br11: Policy *keep*: keeping existing userspace name
br11: Device has addr_assign_type=1
-br11: No stable identifying information found
-br11: Could not generate persistent MAC: No data available
+br11: Using "br11" as stable identifying information
+br11: Using generated persistent MAC address
+Could not set Alias=, MACAddress= or MTU= on br11: Operation not permitted
+br11: Could not apply link config, ignoring: Operation not permitted
Unload module index
Unloaded link configuration context.
ID_NET_DRIVER=bridge
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
If a conflict occurs on a claimed ipv4ll address, the device releases
the address and then does not attempt to acquire a new ipv4ll
address. According to RFC3927, releasing the address in this
situation is correct. However, this should be followed by an attempt
to configure a new ipv4ll address.
This commit restarts the ipv4ll address acquisition state machine
after releasing the conflicting address.
From RFC3927 Section 2.5 conflict defense method (b):
...
However, if this is not the first conflicting ARP packet the host has
seen, and the time recorded for the previous conflicting ARP packet is
recent, within DEFEND_INTERVAL seconds, then the host MUST immediately
cease using this address and configure a new IPv4 Link-Local address
as described above.
...
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
A field "index" is not particularly precise and also might conflict with libc's
index() function definition. Also, pretty much everywhere else we call this
concept "ifindex", including in networkd, the primary user of these libraries.
Hence, let's fix this up and call this "ifindex" everywhere here too.
Header files were organized in a way where the includer would add various
typedefs used by the includee before including it, resulting in a tangled
web of dependencies between files.
Replace this with the following logic:
networkd.h
/ \
networkd-link.h \
networkd-ipv4ll.h--\__\
networkd-fdb.h \
networkd-network.h netword-netdev-*.h
networkd-route.h \
networkd-netdev.h
If a pointer to a structure defined in a different header file is needed,
use a typedef line instead of including the whole header.
Zbigniew Jędrzejewski-Szmek