Multicast snooping enabled bridges maintain a database for multicast
port memberships to decide which mulicast packet is supposed to
egress on which port.
This patch teaches networkd to add entries to this database manually
by adding `[BridgeMDB]` sections to `.network` configuration files.
When introducing CAN-FD support, the .can_fd_mode was not initalized
with -1 and due to cm.mask containing the CAN_CTRLMODE_FD bit, it was
not ignored when FDMode was not configured but instead disabled.
The same thing happened when listen-only mode support was introduced.
On chips that do not support these features, this lead to an error:
can0: Failed to configure CAN link: Operation not supported
Fix it by intializing all the CAN related tristate variables
(.can_listen_only, .can_fd_mode and .can_non_iso) to -1.
SR-IOV provides the ability to partition a single physical PCI
resource into virtual PCI functions which can then be injected in
to a VM. In the case of network VFs, SR-IOV improves north-south n
etwork performance (that is, traffic with endpoints outside the
host machine) by allowing traffic to bypass the host machine’s network stack.
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.
Patch contains a coccinelle script, but it only works in some cases. Many
parts were converted by hand.
Note: I did not fix errors in return value handing. This will be done separate
to keep the patch comprehensible. No functional change is intended in this
patch.
This is an attempt to clean up the POP3/SMTP/LPR/… DHCP lease server
data logic in networkd. This reduces code duplication and fixes a number
of bugs.
This removes any support for collecting POP3/SMPT/LPR servers acquired
via local DHCP client releases since noone uses that, and given how old
these protocols are I doubt this will change. It keeps support for
configuring them for the dhcp server however.
The differences between the DNS/NTP/SIP/POP3/SMTP/LPR configuration
logics are minimized.
This removes the relevant symbols from sd-network.h (which is an
internal API only at this point after all).
This is unfortunately not well test, given the old code for this had
barely any tests. But the new code should not perform worse at least,
and allow us to release, since it corrects some interfaces visible in
the .network configuration format.
Fixes: #15943
To make Driver= in [Match] section work in containers.
Note that ID_NET_DRIVER= property in udev database is set with the
result of the ethtool. So, this should not change anything for
non-container cases.
Closes#15678.
This is a follow-up for 9f83091e3c.
Instead of reading the mtime off the configuration files after reading,
let's do so before reading, but with the fd we read the data from. This
is not only cleaner (as it allows us to save one stat()), but also has
the benefit that we'll detect changes that happen while we read the
files.
This also reworks unit file drop-ins to use the common code for
determining drop-in mtime, instead of reading system clock for that.
In DHCPv6-PD environment, where WAN interface requests IPv6 via DHCPv6,
receives the address as well as delegated prefixes, with LAN interfaces
serving those delegated prefixes in their router advertisement messages.
The LAN interfaces on the router themselves do not have
the IPv6 addresses assigned by networkd from the prefix it
serves on that interface. Now this patch enables it.
It doesn't make much sense to have ConfigureWithoutCarrier set, but not
IgnoreCarrierLoss; all the configuration added during initial interface
bring-up will be lost at the first carrier up/down.
This allows users to configure a subnet id that should be used instead
of automatically (sequentially) assigned subnets. The previous attempt
had the downside that the subnet id would not be the same between
networkd restarts. In some setups it is desirable to have predictable
subnet ids across restarts of services and systems.
The code for the assignment had to be broken up into two pieces. One of
them is the old (sequential) assignment of prefixes and the other is the
new assignment based on configured subnet ids. The new assignment code
has to be executed first and has to be taken into account when (later
on) allocating the "old" subnets from the same pool.
Instead of having one iteration through the links we are now trying to
allocate a prefix for every link on every delegated prefix, unless they
received an assignment in a previous iteration.
Defines how link-local and autoconf addresses are generated.
0: generate address based on EUI64 (default)
1: do no generate a link-local address, use EUI64 for addresses generated
from autoconf
2: generate stable privacy addresses, using the secret from
stable_secret (RFC7217)
3: generate stable privacy addresses, using a random secret if unset
Prompted by the discussions in #15180.
This is a bit more complex than I hoped, since for PID 1 we need to pass
in the synethetic environment block in we generate on demand.
Anyone previously using the UseRoutes=false parameter expected their
dhcp4-provided gateway route to be ignored, as well. However, with
the introduction of the UseGateway= parameter, this is no longer true.
In order to keep backwards compatibility, this sets the UseGateway=
default value to whatever UseRoutes= has been set to.
When specifying `DHCPv4.SendOption=`, it is used by systemd-networkd to
set the value of that option within the DHCP request that is sent out.
This differs to setting `DHCPServer.SendOption=`, which will place all
the options together as suboptions into the vendor-specific information
(code 43) option.
This commit adds two new config options, `DHCPv4.SendVendorOption=` and
`DHCPServer.SendVendorOption=`. These both have the behaviour of the old
`DHCPServer.SendOption=` flag, and set the value of the suboption in the
vendor-specific information option.
The behaviour of `DHCPServer.SendOption=` is then changed to reflect
that of `DHCPv4.SendOption=`. It will set the value of the corresponding
option in the DHCP request.
Proportional Integral controller-Enhanced (PIE) is a control
theoretic active queue management scheme. It is based on the
proportional integral controller but aims to control delay.
http://man7.org/linux/man-pages/man8/tc-pie.8.html
Provide names to choose between different auto-generation types:
2.1 "eui64" for EUI-64 of RFC 4291
2.2 "prefixstable" for RFC 7217
```
[Match]
Name=veth99
[Network]
DHCP=no
IPv6AcceptRA=yes
IPv6Token=prefixstable:2001:888:0db8:1::
```
This never made into a release, so we can change the name with impunity.
Suggested by Davide Pesavento.
I opted to add the "ing" ending. "Fair queuing" is the name of the general
concept and algorithm, and "Fair queue" is mostly used for the implementation
name.
Two releases ago we started warning about this, and I think it is now to turn
this into a hard error. People get bitten by this every once in a while, and
there doesn't see to be any legitimate use case where the same .link or
.network files should be applied to _all_ interfaces, since in particular that
configuration would apply both to lo and any other interfaces. And if for
whatever reason that is actually desired, OriginalName=* or Name=* can be
easily added to silence the warning and achieve the effect.
(The case described in #12098 is particularly nasty: 'echo -n >foo.network'
creates a mask file, 'echo >foo.network' creates a "match all" file.)
Fixes#717, #12098 for realz now.
Yu Watanabe