Remote= must be a non multicast address. ip-link(8) says:
> remote IPADDR - specifies the unicast destination IP address to
> use in outgoing packets when the destination link layer address
> is not known in the VXLAN device forwarding database.
Closes#8088.
Changed <filename>.service</filename> to <literal>.service</literal> to match style in other manual pages: man 5 systemd.socket, device, mount, automount, swap, target path, timer, slice and scope.
Changed "reboot" to "power off" in poweroff.target description. It was most likely copied and pasted from the reboot.target below, compare with e.g. halt.target
This documents how the age of a file is determined, which previously was
only alluded to in other parts of the documentation. Fixes#8091.
The phrasings of “last modification timestamp” etc. are taken from
man:inode(7) (as of man-pages 4.14). The debug messages in tmpfiles.c
use different messages (“modify time”), which according to a code
comment follow man:stat(1); however, my copy of that manpage (from GNU
coreutils 8.29) documents %y as “time of last data modification”
instead.
The VDSO provided by the kernel for x32, uses x86-64 syscalls instead of
x32 ones.
I think we can safely allow this; the set of x86-64 syscalls should be
very similar to the x32 ones. The real point is not to allow *x86*
syscalls, because some of those are inconveniently multiplexed and we're
apparently not able to block the specific actions we want to.
When used in a package installation script, we want to invoke systemd-sysusers
before that package is installed (so it can contain files owned by the newly
created user), so the configuration to use is specified on the command
line. This should be a copy of the configuration that will be installed as
/usr/lib/sysusers.d/package.conf. We still want to obey any overrides in
/etc/sysusers.d or /run/sysusers.d in the usual fashion. Otherwise, we'd get a
different result when systemd-sysusers is run with a copy of the new config on
the command line and when systemd-sysusers is run at boot after package
instalation. In the second case any files in /etc or /run have higher priority,
so the same should happen when the configuration is given on the command line.
More generally, we want the behaviour in this special case to be as close to
the case where the file is finally on disk as possible, so we have to read all
configuration files, since they all might contain overrides and additional
configuration that matters. Even files that have lower priority might specify
additional groups for the user we are creating. Thus, we need to read all
configuration, but insert our new configuration somewhere with the right
priority.
If --target=/path/to/file.conf is given on the command line, we gather the list
of files, and pretend that the command-line config is read from
/path/to/file.conf (doesn't matter if the file on disk actually exists or
not). All package scripts should use this option to obtain consistent and
idempotent behaviour.
The corner case when --target= is specified and there are no positional
arguments is disallowed.
v1:
- version with --config-name=
v2:
- disallow --config-name= and no positional args
v3:
- remove --config-name=
v4:
- add --target= and rework the code completely
v5:
- fix argcounting bug and add example in man page
v6:
- rename --target to --replace
If the configuration is included in a script, this is more convient.
I thought it would be possible to use this for rpm scriptlets with
'%pre -p systemd-sysuser "..."', but apparently there is no way to pass
arguments to the executable ($1 is used for the package installation count).
But this functionality seems generally useful, e.g. for testing and one-off
scripts, so let's keep it.
There's a slight change in behaviour when files are given on the command line:
if we cannot parse them, error out instead of ignoring the failure. When trying
to parse all configuration files, we don't want to fail even if some config
files are broken, but when parsing a list of items specified explicitly, we
should.
v2:
- rename --direct to --inline
> Only system calls of the *specified* architectures will be permitted to
> processes of this unit.
(my emphasis)
> Note that setting this option to a non-empty list implies that
> native is included too.
Attempting to use "implies" in the later sentence, in a way that
contradicts the very clear meaning of the earlier sentence... it's too
much.
Case sensitive or case insensitive matching can be requested using
--case-sensitive[=yes|no].
Unless specified, matching is case sensitive if the pattern contains any
uppercase letters, and case insensitive otherwise. This matches what
forward-search does in emacs, and recently also --ignore-case in less. This
works surprisingly well, because usually when one is wants to do case-sensitive
matching, the pattern is usually camel-cased. In the less frequent case when
case-sensitive matching is required with an all-lowercase pattern,
--case-sensitive can be used to override the automatic logic.
This PR allows to write sysuser.conf lines like:
```
u games 5:60 -
```
This will create an a "games" user with uid 5 and games group with
gid 60. This is arguable ugly, however it is required to represent
certain configurations like the default passwd file on Debian and
Ubuntu.
When the ":" syntax is used and there is a group with the given
gid already then no new group is created. This allows writing the
following:
```
g unrelated 60
u games 5:60 -
```
which will create a "games" user with the uid 5 and the primary
gid 60. No group games is created here (might be useful for [1]).
[1] https://pagure.io/packaging-committee/issue/442
CHANGE OF BEHAVIOUR — with this commit "f" line's behaviour is altered
to match what the documentation says: if an "argument" string is
specified it is written to the file only when the file didn't exist
before. Previously, it would be appended to the file each time
systemd-tmpfiles was invoked — which is not a particularly useful
behaviour as the tool is not idempotent then and the indicated files
grow without bounds each time the tool is invoked.
I did some spelunking whether this change in behaviour would break
things, but afaics nothing relies on the previous O_APPEND behaviour of
this line type, hence I think it's relatively safe to make "f" lines
work the way the docs say, rather than adding a new modifier for it or
so.
Triggered by:
https://lists.freedesktop.org/archives/systemd-devel/2018-January/040171.html
Currently, we create leading directories implicitly for all lines that
create directory or directory-like nodes.
With this, we also do the same for a number of other lines: f/F, C, p,
L, c/b (that is regular files, pipes, symlinks, device nodes as well as
file trees we copy).
The leading directories are created with te default access mode of 0755.
If something else is desired, users should simply declare appropriate
"d" lines.
Fixes: #7853
New debug verb that enables or disables the service runtime watchdogs
and emergency actions during runtime. This is the systemd-analyze
version of the systemd.service_watchdogs command line option.
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
sd_journal_stream_fd() does not return the same file descriptor across
different calls. It can't possibly do so, because the file descriptor
is created using certain parameters passed by the caller.
Also the implementation clearly isn't doing this, it's just connecting
to a unix socket.
It opens exactly one file descriptor, and does not close it unless there
is a write failure. Nothing like "temporarily multiple file descriptors
may be open".
These restrictions are implied by systemd options used for
systemd-udevd.service, i.e. MountFlags=slave and
IPAddressDeny=any. However, there are users out there getting tripped by
this, so let's make things clear in the man page so the actual
restrictions we implement by default have better visibility.
Follow-up for e79eabdb1b. There was an
apparent contradiction:
man/systemd.unit says for Requires=:
Besides, with or without specifying After=, this unit will be deactivated
if one of the other units get deactivated.
Also, some unit types may deactivate on their own (for example, a service
process may decide to exit cleanly, or a device may be unplugged by the
user), which is not propagated to units having a Requires= dependency.
Fixes#7870.
