If an entry in fstab uses "x-systemd.automount" option and also asks for
additionnal dependencies via x-systemd.requires or such, then the dependencies
were applied to the automount unit.
But this unlikely to do the right thing and is inconsistent with what's done
for network mounts.
Indeed when an fstab entries has "_netdev,x-systemd.automount" options, the
dependencies against the network requested by "_netdev" are (correctly) applied
to the mount unit only and the automount unit remains ordered against
local-fs.target.
The same logic should be followed when extra deps are specified via the mount
options as automount units should always be ordered against local-fs.target.
Note: in general explicit deps specified via mount options should be used with
care and should be used to specify dependencies on other mount units only as it
can easily create ordering cycles otherwise like it's been seen in
https://github.com/systemd/systemd-stable/issues/69. Mount units (as well as
automount ones) are ordered before local-fs.target by default which is a
low-level target that most other units depend on.
There's some highly specific PKCS#11 code in homectl.c. Let's split that
out, since it is easily isolatable, to make homectl.c a bit more
readable.
No funcional changes, just some moving around and renaming two functions
to make them more suitably named when exported.
When updating a home directory we might update the record first, then
resize the image and finally synchronize the passwords to the storage
layers. These are three individually authenticated operations. Since
each might require touching a FIDO2 or PKCS#11 key we should say what we
are doing. Hence do so.
Usually we are pretty quiet with what we do, and let's stick to that.
Hence show this information only if we actually do more than one thing.
If we only update (and do not resize/sync passwords) then let's be quiet
as usual, as the command line then sufficiently clarifies what we are
doing.
After all, when creating we might need interaction with the security
token too, and our initial attempt to create the user will fail, since
we do not allow interactive auth on the security token, so that we then
can print a log message and retry with interactive auth then enabled.
We'd like to use it for FIDO2 tokens too, and the concept is entirely
generic, hence let's just reuse the field, but rename it. Read the old
name for compatibility, and treat the old name and the new name as
identical for most purposes.
SR-IOV provides the ability to partition a single physical PCI
resource into virtual PCI functions which can then be injected in
to a VM. In the case of network VFs, SR-IOV improves north-south n
etwork performance (that is, traffic with endpoints outside the
host machine) by allowing traffic to bypass the host machine’s network stack.
All devices behind a SPI controller have the same udev ID_PATH property.
This is a problem for predicable network names for CAN controllers.
CAN controllers, in contrast to Ethernet controllers, don't have a MAC
Address, so there's no way to tell two CAN controllers on the same SPI
host controller apart:
$ udevadm info /sys/class/net/can0
P: /devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.1/net/can0
L: 0
E: DEVPATH=/devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.1/net/can0
E: INTERFACE=can0
E: IFINDEX=3
E: SUBSYSTEM=net
E: USEC_INITIALIZED=11187199
E: ID_PATH=platform-fe204000.spi
E: ID_PATH_TAG=platform-fe204000_spi
E: SYSTEMD_ALIAS=/sys/subsystem/net/devices/can0
E: TAGS=:systemd:
$ udevadm info /sys/class/net/can1
P: /devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.0/net/can1
L: 0
E: DEVPATH=/devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.0/net/can1
E: INTERFACE=can1
E: IFINDEX=4
E: SUBSYSTEM=net
E: USEC_INITIALIZED=11192211
E: ID_PATH=platform-fe204000.spi
E: ID_PATH_TAG=platform-fe204000_spi
E: SYSTEMD_ALIAS=/sys/subsystem/net/devices/can1
E: TAGS=:systemd:
With this the chip select number is added to the ID_PATH, to make
predictable network names possible.
$ sudo udevadm info /sys/class/net/can0
P: /devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.1/net/can0
L: 0
E: DEVPATH=/devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.1/net/can0
E: INTERFACE=can0
E: IFINDEX=3
E: SUBSYSTEM=net
E: USEC_INITIALIZED=11187199
E: ID_PATH=platform-fe204000.spi-cs-1
E: ID_PATH_TAG=platform-fe204000_spi-cs-1
E: SYSTEMD_ALIAS=/sys/subsystem/net/devices/can0
E: TAGS=:systemd:
$ sudo udevadm info /sys/class/net/can1
P: /devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.0/net/can1
L: 0
E: DEVPATH=/devices/platform/soc/fe204000.spi/spi_master/spi0/spi0.0/net/can1
E: INTERFACE=can1
E: IFINDEX=4
E: SUBSYSTEM=net
E: USEC_INITIALIZED=11192211
E: ID_PATH=platform-fe204000.spi-cs-0
E: ID_PATH_TAG=platform-fe204000_spi-cs-0
E: SYSTEMD_ALIAS=/sys/subsystem/net/devices/can1
E: TAGS=:systemd:
When the system is under heavy load, it can happen that the unit cache
is refreshed for an unrelated reason (in the test I simulate this by
attempting to start a non-existing unit). The new unit is found and
accounted for in the cache, but it's ignored since we are loading
something else.
When we actually look for it, by attempting to start it, the cache is
up to date so no refresh happens, and starting fails although we have
it loaded in the cache.
When the unit state is set to UNIT_NOT_FOUND, mark the timestamp in
u->fragment_loadtime. Then when attempting to load again we can check
both if the cache itself needs a refresh, OR if it was refreshed AFTER
the last failed attempt that resulted in the state being
UNIT_NOT_FOUND.
Update the test so that this issue reproduces more often.
Zbigniew Jędrzejewski-Szmek