Found by the following warning by gcc.
```
../src/network/networkd-manager.c: In function 'dhcp6_prefixes_compare_func':
../src/network/networkd-manager.c:1383:16: warning: 'memcmp' reading 16 bytes from a region of size 8 [-Wstringop-overflow=]
return memcmp(&a, &b, sizeof(*a));
^
```
This also adds the ability to incorporate arrays into netlink messages
and to determine when a netlink message is too big, used by some generic
netlink protocols.
The changes both networkd and resolved to make use of the watch_bind
feature of sd-bus to connect to the system bus. This way, both daemons
can be started during early boot, and automatically and instantly
connect to the system bus as it becomes available.
This replaces prior code that used a time-based retry logic to connect
to the bus.
Let's remove a number of synchronization points from our service
startups: let's drop synchronous match installation, and let's opt for
asynchronous instead.
Also, let's use sd_bus_match_signal() instead of sd_bus_add_match()
where we can.
Add a hashmap to the Manager struct that stores the association
between an IPv6 prefix and the network Link it is assigned to.
This is added in order to keep assigning the same prefixes with
the same links even though they are delegated at different times
or by different DHCPv6 clients.
Init rule variable iif oif and to, from
While foreign rules are added the network part is not attached.
attach manager to rules and use it in routing_policy_rule_free.
Let's replace usage of fputc_unlocked() and friends by __fsetlocking(f,
FSETLOCKING_BYCALLER). This turns off locking for the entire FILE*,
instead of doing individual per-call decision whether to use normal
calls or _unlocked() calls.
This has various benefits:
1. It's easier to read and easier not to forget
2. It's more comprehensive, as fprintf() and friends are covered too
(as these functions have no _unlocked() counterpart)
3. Philosophically, it's a bit more correct, because it's more a
property of the file handle really whether we ever pass it on to another
thread, not of the operations we then apply to it.
This patch reworks all pieces of codes that so far used fxyz_unlocked()
calls to use __fsetlocking() instead. It also reworks all places that
use open_memstream(), i.e. use stdio FILE* for string manipulations.
Note that this in some way a revert of 4b61c87511.
../src/network/networkd-link.c:3577:84: warning: format specifies type 'unsigned char' but the argument has type 'uint32_t' (aka 'unsigned int') [-Wformat]
route->dst_prefixlen, route->tos, route->priority, route->table, route->lifetime);
^~~~~~~~~~~~
../src/network/networkd-manager.c:1146:132: warning: format specifies type 'unsigned char' but the argument has type 'uint32_t' (aka 'unsigned int') [-Wformat]
rule->from_prefixlen, space ? " " : "", to_str, rule->to_prefixlen, rule->tos, rule->fwmark, rule->fwmask, rule->table);
^~~~~~~~~~~
Also add some line breaks to make it easier to see which argument is for which
part of the format string.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
From bce67bbee3, systemd-networkd always shows
```
rtnl: received address with invalid family type 32, ignoring.
```
during boot-up. In the code, there are log_warning() and log_debug() for the
same situation, and the log_debug() is never called. So, let's lower the
log level and remove never called function.
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
As a follow-up for db3f45e2d2 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
This adds a modified version of dhcp6_option_parse_domainname() that is
able to parse compressed domain names, borrowing the idea from
dns_packet_read_name(). It also adds pieces in networkd-link and
networkd-manager to properly save/load the added option field.
Resolves#2710.
This will allow us to have several managers sharing an event loop
and running in parallel, as if they were running in separate processes.
The long term-aim is to allow networkd to be split into separate
processes, so restructure the code to make this simpler.
For now we drop the exit-on-idle logic, as this was anyway severely
restricted at the moment. Once split, we will revisit this as it may
then make more sense again.
If setting the received timezone or transient hostname fails because D-Bus is
not (yet) up, store the data in the Manager object and try again after
connecting to D-Bus.
DNS servers must be specified as IP addresses, hence let's store them as that
internally, so that they are guaranteed to be fully normalized always, and
invalid data cannot be stored.
It is just an alias for route_free which requires that route is not null,
but it was only used in one place where it was checked that route is not
null anyway. Let's just call route_free instead.
Separate fields are replaced with a struct.
Second second duid type field is removed. The first field was used to carry
the result of DUIDType= configuration, and the second was either a copy of
this, or contained the type extracted from DuidRawData. The semantics are changed
so that the type specified in DUIDType is always used. DUIDRawData= no longer
overrides the type setting.
The networkd code is now more constrained than the sd-dhcp code:
DUIDRawData cannot have 0 length, length 0 is treated the same as unsetting.
Likewise, it is not possible to set a DUIDType=0. If it ever becomes necessary
to set type=0 or a zero-length duid, the code can be changed to support that.
Nevertheless, I think that's unlikely.
This addresses #3127 § 1 and 3.
v2:
- rename DUID.duid, DUID.duid_len to DUID.raw_data, DUID.raw_data_len
Both versions of the code are changed to allow the caller to override
DUID using simple rules: duid type and value may be specified, in
which case the caller is responsible to providing the contents,
or just duid type may be specified as DUID_TYPE_EN, in which case we
we fill in the values. In the future more support for other types may
be added, e.g. DUID_TYPE_LLT.
There still remains and ugly discrepancy between dhcp4 and dhcp6 code:
dhcp6 has sd_dhcp6_client_set_duid and sd_dhcp6_client_set_iaid and
requires client->state to be DHCP6_STATE_STOPPED, while dhcp4 has
sd_dhcp_client_set_iaid_duid and will reconfigure the client if it
is not stopped. This commit doesn't touch that part.
This addresses #3127 § 2.
This patch makes networkd stay around as long as there is more than just a
loopback interface around, or the loopback device isn't fully probed yet, or
the loopback device has a .network file attached.
In essence, this means networkd stays around now continously as it should,
unless it is running in some (container?) environment that really has no
interface except a loopback device.
Fixes#2577.