The current CLI does not support a way to clear these lists, since without any
additional arguments, the command will list the current values.
Introduce a new way to clear the lists by passing a single '' argument to these
subcommands.
Update the man page to document this.
Tested:
$ build/resolvectl domain eth1
Link 3 (eth1): ~.
$ build/resolvectl domain eth1 ''
$ build/resolvectl domain eth1
Link 3 (eth1):
$ build/resolvectl domain eth1 '~.' '~example.com'
$ build/resolvectl domain eth1
Link 3 (eth1): ~. ~example.com
$ build/resolvectl domain eth1 ''
$ build/resolvectl domain eth1
Link 3 (eth1):
$ build/resolvectl domain eth1 '~.'
$ build/resolvectl domain eth1
Link 3 (eth1): ~.
And similar for "dns" and "nta".
Back in 2012 the project was renamed, see the release notes for v 0.105
[https://cgit.freedesktop.org/polkit/tree/NEWS#n754]. Let's update our
documentation and comments to do the same. Referring to PolicyKit is confusing
to users because at the time the polkit api changed too, and we support the new
version. I updated NEWS too, since all the references to PolicyKit there were
added after the rename.
"PolicyKit" is unchanged in various URLs and method call names.
The kernel added support for a new cgroup memory controller knob memory.min in
bf8d5d52ffe8 ("memcg: introduce memory.min") which was merged during v4.18
merge window.
Add MemoryMin to support memory.min.
Use <literallayout> to keep each reference on a separate line. With all the
pages jumbled together into a paragraph, it is quite hard to find anything in
that list.
Also add the missing pages to the list. And remove the nonexistent ones — not
much point in advertisting pages that haven't been written yet.
This is useful if someone wants to recreate the original syslog datagram. We
already include timestamp information as _SOURCE_REALTIME_TIMESTAMP=, and in
normal use that timestamp, converted back to the form used by syslog
(Mth dd HH:MM:SS) would usually give the value. But there are various
circumstances where this might not be true. Most obviously, if the datagram is
sent a bit later after being prepared, the time is rounded to the nearest
second, and it might be off. This is especially bad around New Year when the
syslog timestamp wraps around. Then the same timezone and locale need to be
used to recreate the original timestamp. In the end doing this reliably is
complicated, and it seems much easier to just unconditionally include the
original timestamp.
If the original timestamp cannot be located, we store the full log line.
This way, it should be always possible to recreate the original input.
Example:
MESSAGE=x
SYSLOG_TIMESTAMP=Sep 15 15:07:58
SYSLOG_RAW
^]^@^@^@^@^@^@^@<13>Sep 15 15:07:58 HOST: x^@y
_PID=3318
_SOURCE_REALTIME_TIMESTAMP=1530743976393553
Fixes#2398.
One mention of --user was missing the surrounding <option> tag, making
the table look inconsistent (though the inconsistency is less obvious
after the reordering in 709f4c472c, since the four specifiers mentioning
the --user option are no longer immediately adjacent).
nspawn as it is now is a generally useful tool, hence let's drop the
comments about it being useful for debug and so on only.
The new wording just makes the first sentence of the main page also the
summary.
Similar semantics applies to {System,Runtime}MaxUse= as to
{System,Runtime}MaxFiles=, i.e. active files aren't vacuumed and the limit
is not thus strictly honored.
Let's fully document where the list of entries come from, including unified
images and such.
Let's add a "Files" section (replacing the "Configuration" section), and
let's move it after they keybinding section (why? because keybinds are
primary UI material, while configuration is one level more complex than
that).
Also, reword lot's of stuff to make it more precise.
Fixes: #5127
This is an additional synchronization point normally not needed. Hence,
let's make it passive, i.e. pull it in from the unit which wants to be
ordered before the update service rather than by the update service
itself.
systemd offline-updates allows dropping multiple system update units
to be added to system-update.target.wants.
As documented in systemd.offline-updates(7) only 1 of these units
should actually be active (based on the /system-update symlink) and
when that unit is done it should reboot the system.
In some cases it is desirable to run a unit whenever booting in
offline-updates mode indepedent of which update unit is going to
handle the update. One example of this is integration with bootloader
code which checks if the previous boot was succesful.
Since the active unit will reboot the system when it is done, there
is no guarantee that adding such a unit to system-update.target.wants
will get it executed always.
This commit adds a system-update-pre.target which can be used for
units which should always run when booting in offline-updates mode.
Currently we employ mostly system call blacklisting for our system
services. Let's add a new system call filter group @system-service that
helps turning this around into a whitelist by default.
The new group is very similar to nspawn's default filter list, but in
some ways more restricted (as sethostname() and suchlike shouldn't be
available to most system services just like that) and in others more
relaxed (for example @keyring is blocked in nspawn since it's not
properly virtualized yet in the kernel, but is fine for regular system
services).
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
To make debugging easier, this patches allows one to change the log target and
do reload/reexec without modifying configuration permanently, which makes
debugging easier.
Indeed if one changed the log target at runtime (via the bus or via signals),
the change was lost on the next reload/reexecution.
In order to restore back the default value (set via system.conf, environment
variables or any other means ), the empty string in the "LogTarget" property is
now supported as well as sending SIGTRMIN+26 signal.
To make debugging easier, this patches allows one to change the log level and
do reload/reexec without modifying configuration permanently, which makes
debugging easier.
Indeed if one changed the log max level at runtime (via the bus or via
signals), the change was lost on the next daemon reload/reexecution.
In order to restore the original value back (set via system.conf, environment
variables or any other means), the empty string in the "LogLevel" property is
now supported as well as sending SIGRTMIN+23 signal.
Since bb28e68477 parsing failures of
certain unit file settings will result in load failures of units. This
introduces a new load state "bad-setting" that is entered in precisely
this case.
With this addition error messages on bad settings should be a lot more
explicit, as we don't have to show some generic "errno" error in that
case, but can explicitly say that a bad setting is at fault.
Internally this unit load state is entered as soon as any configuration
loader call returns ENOEXEC. Hence: config parser calls should return
ENOEXEC now for such essential unit file settings. Turns out, they
generally already do.
Fixes: #9107
These states should never be visible to the outside, as they are used
only internally while loading unit. Hence let's drop them from the
documentation.
This adds a function sd_bus_slot_set_destroy_callback() to set a function
which can free userdata or perform other cleanups.
sd_bus_slot_get_destory_callback() queries the callback, and is included
for completeness.
Without something like this, for floating asynchronous callbacks, which might
be called or not, depending on the sequence of events, it's hard to perform
resource cleanup. The alternative would be to always perform the cleanup from
the caller too, but that requires more coordination and keeping of some shared
state. It's nicer to keep the cleanup contained between the callback and the
function that requests the callback.
The only difference is that functions are not individually listed by name,
but that seems completely pointless, since all functions that are documented
are always exported, so the generic text tells the user all she or he needs
to know.
Fedora 28 is out already, let's advertise it. While at it, drop "container"
from "f28container" — it's a subdirectory under /var/lib/machines, it's pretty
obvious that's it a container.
To make the switch easier in the future, define the number as an entity.
This "netdevsim" as implied by the name is a tool for network developers and is a simulator.
This simulated networking device is used for testing various networking APIs and at this time
is particularly focused on testing hardware offloading related interfaces.
'systemctl disable --runtime' would disable a unit, but only if it was enabled
with '--runtime', and silently do nothing if the unit was enabled persistently.
And similarly 'systemctl disable' would do nothing if the unit was enabled in
/run. This just doesn't seem useful.
This pathch changes enable/disable and mask/unmask to be asymmetrical. enable
and mask create symlinks in /etc or /run, depending on whether --runtime was
specified. disable and unmask remove symlinks from both locations. --runtime
cannot be specified for the disable and unmask verbs.
The advantage is that 'disable' now means that the unit is disabled, period.
And similarly for 'unmask', all masks are removed.
Similarly for preset and preset-all, they now cannot be called with --runtime,
and are asymmetrical: when they enable a unit, symlinks are created in /etc.
When they disable a unit, all symlinks are nuked.
$ systemctl --root=/ enable bluetooth
Created symlink /etc/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ --runtime enable bluetooth
Created symlink /run/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /run/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ disable bluetooth
Removed /run/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /run/systemd/system/dbus-org.bluez.service.
Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /etc/systemd/system/dbus-org.bluez.service.
$ systemctl --root=/ disable --runtime bluetooth
--runtime cannot be used with disable
$ systemctl --root=/ mask --runtime bluetooth
Created symlink /run/systemd/system/bluetooth.service → /dev/null.
$ systemctl --root=/ mask bluetooth
Created symlink /etc/systemd/system/bluetooth.service → /dev/null.
$ systemctl --root=/ unmask bluetooth
Removed /run/systemd/system/bluetooth.service.
Removed /etc/systemd/system/bluetooth.service.
$ systemctl --root=/ unmask --runtime bluetooth
--runtime cannot be used with unmask
$ systemctl --root=/ --runtime enable bluetooth
Created symlink /run/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /run/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ enable bluetooth
Created symlink /etc/systemd/system/dbus-org.bluez.service → /usr/lib/systemd/system/bluetooth.service.
Created symlink /etc/systemd/system/bluetooth.target.wants/bluetooth.service → /usr/lib/systemd/system/bluetooth.service.
$ systemctl --root=/ preset bluetooth
Removed /run/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /run/systemd/system/dbus-org.bluez.service.
Removed /etc/systemd/system/bluetooth.target.wants/bluetooth.service.
Removed /etc/systemd/system/dbus-org.bluez.service.
$ systemctl --root=/ preset --runtime bluetooth
--runtime cannot be used with preset
$ systemctl preset-all --runtime
--runtime cannot be used with preset-all
Lennart Poettering