Looked for definitions of functions using the *_compare_func() suffix.
Tested:
- Unit tests passed (ninja -C build/ test)
- Installed this build and booted with it.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
When configuring a network address with /31 using networkd, a /31 without a
broadcast specified should be present.
A /31 which has neither a network nor a broadcast address. See
https://tools.ietf.org/html/rfc3021Fixes#4038
When we are receiving address lifetime valid and lifetime preferred
'0' we set them via ndisc. That makes is shows as depricated and we
treat this as not ready.
In link_check_ready we look for whether address is depricated and
since this is depricated we never configure this link.
Thanks to Marc Haber <mh+github@zugschlus.de>
lifetime 0 a valid, and common, use case. It enables an installation to
autoconfigure systems in a way that they become immediately reachable
without needing local configuration after they have been turned on (for
example, for remote configuration). The local admin can then configure
additional, static IP addresses to be used for the server's service (and
the IP adress _only_, while the rest of network configuration still comes
from autoconfiguration), while _KEEPING_ the possibiltiy to reach the
system over the autoconfigured address in the case that static
configuration fails.
The correct way is to handle the announcement exactly as it is correctly
handled in the released software: It configures the address as
"deprecated", causing the kernel to accept packets addresses to it, and
not to use it for outgoing packets/connections _UNLESS_ there is no other
way to send the packet out.
The only change that is needed is that systemd-networkd should not wedge
itself in that case, it should just continue working (with two IP
addresses configured on the interface).
An IPv6 address with a remamining lifetime of zero is _NOT_ like an
expired IPv4 DHCP lease, it's still a valid and useable IP address. It
is just that the network advises the host not to use the address any
more for outgoing traffic _UNLESS_ there is no other way to send the
traffic.
Fixes#6359
Let's rename all our functions that process IPv4 in_addr structures
in4_addr_xyz(), following the already establishing naming logic for
this.
Leave the in_addr_xyz() prefix for functions that process the IPv4/IPv6
in_addr_union union instead.
Add variables for enabling Router Advertisements, router lifetime as
well as managed and other information flags indicating use of DHCPv6.
Add configuration of default router preferences as defined in RFC 4191.
IPv6PrefixDelegation in the [Network] section has to be set in order
to enable prefix delegation. The rest of the prefix delegation values
are stored in the [IPv6PrefixDelegation] section. The host will act as
a default router if it is given a non-zero lifetime with
RouterLifetimeSec. Managed and OtherInformation booleans set the level
of DHCPv6 support, and the RouterPreference configures the router's
preference between low, medium and high. Words 'normal' and 'default'
are added as synonyms for 'medium' just to make configuration simpler.
This adds a section like the following to .network configuration files:
[Network]
IPv6PrefixDelegation=true
[IPv6PrefixDelegation]
RouterLifetimeSec=2000
Managed=false
OtherInformation=true
RouterPreference=medium
Support zero or more [IPv6Prefix] sections in the network configuration
files. Each section can have one Prefix=<subnet>[/<prefixlength>]
option, with the preferred and valid lifetimes specified by
ValidLifetimeSec and PreferredLifetimeSec measured in seconds, and
with onlink and address autoconfiguration booleans specified by
OnLink and AddressAutoconfiguration variables.
This adds a section like the following to .network configuration files:
[IPv6Prefix]
Prefix=2001:db8:dead:beef::/64
OnLink=true
AddressAutoconfiguration=true
ValidLifetimeSec=1500
PreferredLifetimeSec=1000
section_line and filename should be set together or not at all. Change the
if to test filename, since it's the first of the pair and it seems more natural
to test that.
Now we track the sections for example [Address] via line number.
Which was fine till we din't had dropins dir. If we have multiple
sections which have the ideantical line number in diffrent files
we are overwriting these since line number is the key.
This patch fixes this by taking filename and line number as key.
This fixes [Address] and [Route] section overwriting.
fixes: #5141
Now we are not dropping the IPv6LL address when link is down.
So next time when link is up and before kernel acquired this address
we are using the old address.
When the link is down kernel tells us that this address is no longer
valid . Let's remove this address and again when kernel tells us
that the address is added let's use it.
fixes#3264
This is partial fix for #2228 and #2977, #3204.
bridge-test: netdev ready
docker0: Gained IPv6LL
wlan0: Gained IPv6LL
eth0: Gained IPv6LL
Enumeration completed
bridge-test: netdev exists, using existing without changing its
parameters
vboxnet0: IPv6 enabled for interface: Success
lo: Configured
docker0: Could not drop address: No such process
vboxnet0: Gained carrier
wlan0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
vboxnet0: Gained IPv6LL
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
[New Thread 0x7ffff6505700 (LWP 1111)]
[Thread 0x7ffff6505700 (LWP 1111) exited]
Assertion 'link->state == LINK_STATE_SETTING_ROUTES' failed at
src/network/networkd-link.c:672, function link_enter_configured().
Aborting.
Program received signal SIGABRT, Aborted.
0x00007ffff6dc6a98 in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: dnf debuginfo-install
iptables-1.4.21-15.fc23.x86_64 libattr-2.4.47-14.fc23.x86_64
libidn-1.32-1.fc23.x86_64 pcre-8.38-7.fc23.x86_64
Debugging
(gdb) bt
"link->state == LINK_STATE_SETTING_ROUTES", file=0x5555556a34c8
"src/network/networkd-link.c", line=672,
func=0x5555556a56d0 <__PRETTY_FUNCTION__.14850>
"link_enter_configured") at src/basic/log.c:788
src/network/networkd-link.c:672
src/network/networkd-link.c:720
flags=0 '\000', scope=0 '\000', cinfo=0x7fffffffe020) at
src/network/networkd-address.c:344
(rtnl=0x5555556eded0, message=0x55555570ff20, userdata=0x5555556ec590)
at src/network/networkd-manager.c:604
m=0x55555570ff20) at src/libsystemd/sd-netlink/sd-netlink.c:365
at src/libsystemd/sd-netlink/sd-netlink.c:395
ret=0x0) at src/libsystemd/sd-netlink/sd-netlink.c:429
revents=1, userdata=0x5555556eded0) at
src/libsystemd/sd-netlink/sd-netlink.c:723
src/libsystemd/sd-event/sd-event.c:2268
src/libsystemd/sd-event/sd-event.c:2629
timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2688
bus=0x5555556eeba0, name=0x55555568a2f5 "org.freedesktop.network1",
timeout=30000000,
check_idle=0x55555556adb6 <manager_check_idle>,
userdata=0x5555556ec590) at src/shared/bus-util.c:134
src/network/networkd-manager.c:1130
src/network/networkd.c:127
(gdb) f 3
src/network/networkd-link.c:672
672 assert(link->state == LINK_STATE_SETTING_ROUTES);
(gdb) p link->state
$1 = LINK_STATE_FAILED
We should not be in this state .
even if vboxnet0 failed we went into this state.
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
This is managed by the kernel, but we should track whether or not we have
a configured IPv6LL address. This fixes two issues:
- we now wait for IPv6LL before considering the link ready
- we now wait for IPv6LL before attempting to do NDisc or DHCPv6
these protocols relies on an LL address being available.
For now only deserialize some basic state and the applied addresses.
When a link is added, try to deserialize it's state from /run. This
is relevant only when networkd is restarted at runtime.
