Let's make it optional whether auditing is enabled at journald start-up
or not.
Note that this only controls whether audit is enabled/disabled in the
kernel. Either way we'll still collect the audit data if it is
generated, i.e. if some other tool enables it, we'll collect it.
Fixes: #959
There are legitimate reasons to access the file directly, as currently
discussed on fedora-devel. Hence tone things down from "must" to "should
typically not".
Also, let's use fputs() instead of fputs_unlocked() here,
fopen_temporary_label() turns off stdio locking anyway for the whole
FILE*, hence no need to do this manually each time.
Builds with recent glibc would fail with:
../src/network/netdev/fou-tunnel.c: In function ‘config_parse_ip_protocol’:
../src/basic/macro.h:380:9: error: static assertion failed: "IPPROTO_MAX-1 <= UINT8_MAX"
380 | static_assert(expr, #expr)
| ^~~~~~~~~~~~~
../src/network/netdev/fou-tunnel.c:161:9: note: in expansion of macro ‘assert_cc’
161 | assert_cc(IPPROTO_MAX-1 <= UINT8_MAX);
| ^~~~~~~~~
This is because f9ac84f92f151e07586c55e14ed628d493a5929d (present in
glibc-2.31.9000-9.fc33.x86_64) added IPPROTO_MPTCP=262, following
v5.5-rc5-1002-gfaf391c382 in the kernel.
The watchdog ping is performed for every iteration of manager event
loop. This results in a lot of ioctls on watchdog device driver
especially during boot or if services are aggressively using sd_notify.
Depending on the watchdog device driver this may have performance
impact on embedded systems.
The patch skips sending the watchdog to device driver if the ping is
requested before half of the watchdog timeout.
proot provides userspace-powered emulation of chroot and mount --bind,
lending it to be used on environments without unprivileged user
namespaces, or in otherwise restricted environments like Android.
In order to achieve this, proot makes use of the kernel's ptrace()
facility, which we can use in order to detect its presence. Since it
doesn't use any kind of namespacing, including PID namespacing, we don't
need to do any tricks when trying to get the tracer's metadata.
For our purposes, proot is listed as a "container", since we mostly use
this also as the bucket for non-container-but-container-like
technologies like WSL. As such, it seems like a good fit for this
section as well.
It's pretty, and it highlights that the pw prompt is kinda special and
needs user input.
We suppress the emoji entirel if there's no emoji support (i.e. this
means we suppress the ASCII replacement), since it carries no additional
information, it is just decoration to highlight a line.
We provide a way via the '-' symbol to ignore errors when nonexistent
executable files are passed to Exec* parameters & so on. In such a case,
the flag `EXEC_COMMAND_IGNORE_FAILURE` is set and we go on happily with
our life if that happens. However, `systemd-analyze verify` complained
about missing executables even in such a case. In such a case it is not
an error for this to happen so check if the flag is set before checking
if the file is accessible and executable.
Add some small tests to check this condition.
Closes#15218.
This commit introduces new meson build option "kernel-install" to prevent kernel-install from building if the user
sets the added option as "false".
Signed-off-by: Jakov Smolic <jakov.smolic@sartura.hr>
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
An stdio FILE* stream usually refers to something with a file
descriptor, but that's just "usually". It doesn't have to, when taking
fmemopen() and similar into account. Most of our calls to fileno()
assumed the call couldn't fail. In most cases this was correct, but in
some cases where we didn't know whether we work on files or memory we'd
use the returned fd as if it was unconditionally valid while it wasn't,
and passed it to a multitude of kernel syscalls. Let's fix that, and do
something reasonably smart when encountering this case.
(Running test-fileio with this patch applied will remove tons of ioctl()
calls on -1).
This should hopefully help us avoid c&p mistakes. And there are plans to
add more settings like this, which should then be rather straightforward.
There is a slight functional change: the code got uplink handling wrong
and run manager_find_uplink() repeatedly. That part is fixed.
Let's not trigger MACs needlessly.
Ideally everybody would turn on userdb, but if people insist in not
doing so, then let's not attempt to open shadow.
It's a bit ugly to implement this, since shadow information is more than
just passwords (but accound validity metadata), and thus userdb's own
"privieleged" scheme is orthogonal to this, but let's still do this for
the client side.
Fixes: #15105
This patch changes the way user managers set the default umask for the units it
manages.
Indeed one can expect that if user manager's umask is redefined through PAM
(via /etc/login.defs or pam_umask), all its children including the units it
spawns have their umask set to the new value.
Hence make user units inherit their umask value from their parent instead of
the hard coded value 0022 but allow them to override this value via their unit
file.
Note that reexecuting managers with 'systemctl daemon-reexec' after changing
UMask= has no effect. To take effect managers need to be restarted with
'systemct restart' instead. This behavior was already present before this
patch.
Fixes#6077.
When managing a home directory as LUKS image we currently place a
directory at the top that contains the actual home directory (so that
the home directory of the user won't be cluttered by lost-found and
suchlike). On btrfs let's make that a subvol though. This is a good idea
so that possibly later on we can make use of this for automatic history
management.
Fixes: #15121
The commit b3ac5f8cb9 has changed the system mount propagation to
shared by default, and according to the following patch:
https://github.com/opencontainers/runc/pull/208
When starting the container, the pouch daemon will call runc to execute
make-private.
However, if the systemctl daemon-reexec is executed after the container
has been started, the system mount propagation will be changed to share
again by default, and the make-private operation above will have no chance
to execute.
This makes the Environment entries more round-trippable: a similar format is
used for input and output. It is certainly more useful for users, because
showing [unprintable] on anything non-trivial makes systemctl show -p Environment
useless in many cases.
Fixes: #14723 and https://bugzilla.redhat.com/show_bug.cgi?id=1525593.
$ systemctl --user show -p Environment run-*.service
Environment=ASDF=asfd "SPACE= "
Environment=ASDF=asfd "SPACE=\n\n\n"
Environment=ASDF=asfd "TAB=\t\\" "FOO=X X"
non-underlined yellow uses RGB ANSI sequences while the underlined
version uses the paletted ANSI sequences. Let's unify that and use the
RGB sequence for both cases, so that underlined or not doesn't alter the
color.
This reworks the user validation infrastructure. There are now two
modes. In regular mode we are strict and test against a strict set of
valid chars. And in "relaxed" mode we just filter out some really
obvious, dangerous stuff. i.e. strict is whitelisting what is OK, but
"relaxed" is blacklisting what is really not OK.
The idea is that we use strict mode whenver we allocate a new user
(i.e. in sysusers.d or homed), while "relaxed" mode is when we process
users registered elsewhere, (i.e. userdb, logind, …)
The requirements on user name validity vary wildly. SSSD thinks its fine
to embedd "@" for example, while the suggested NAME_REGEX field on
Debian does not even allow uppercase chars…
This effectively liberaralizes a lot what we expect from usernames.
The code that warns about questionnable user names is now optional and
only used at places such as unit file parsing, so that it doesn't show
up on every userdb query, but only when processing configuration files
that know better.
Fixes: #15149#15090
The userdb_by_name() invocation immediately following does the same check
anyway, no need to do this twice.
(Also, make sure we exit the function early on failure)
And similar for other settings that require a writable /var/.
Rationale: if these options are used for early-boot services (such as
systemd-pstore.service) we need /var/ writable. And if /var/ is on the
root fs, then systemd-remount-fs.service is the service that ensures
that /var/ is writable.
This allows us to remove explicit deps in services such as
systemd-pstore.service.
A warning is emitted from sd_bus_message_{get,set}_priority. Those functions
are exposed by pystemd, so we have no easy way of checking if anything is
calling them.
Just making the functions always return without doing anything would be an
option, but then we could leave the caller with an undefined variable. So I
think it's better to make the functions emit a warnings and return priority=0
in the get operation.
Many of the convenience functions from sd-bus operate on verbose sets
of discrete strings for destination/path/interface/member.
For most callers, destination/path/interface are uniform, and just the
member is distinct.
This commit introduces a new struct encapsulating the
destination/path/interface pointers called BusAddress, and wrapper
functions which take a BusAddress* instead of three strings, and just
pass the encapsulated strings on to the sd-bus convenience functions.
Future commits will update call sites to use these helpers throwing
out a bunch of repetitious destination/path/interface strings littered
throughout the codebase, replacing them with some appropriately named
static structs passed by pointer to these new helpers.
From https://github.com/microsoft/WSL/issues/423#issuecomment-221627364:
> it's unlikely we'll change it to something that doesn't contain "Microsoft"
> or "WSL".
... but well, it happened. If they change it incompatibly w/o adding an stable
detection mechanism, I think we should not add yet another detection method.
But adding a different casing of "microsoft" is not a very big step, so let's
do that.
Follow-up for #11932.
On certain distributions such as NixOS the mtime of `/etc/hosts` is
locked to a fixed value. In such cases, only checking the last mtime of
`/etc/hosts` is not enough - we also need to check if the st_ino/st_dev
match up. Thus, let's make sure make sure that systemd-resolved also
rereads `/etc/hosts` if the inode or the device containing `/etc/hosts` changes.
Test script:
```bash
hosts="/etc/hosts"
echo "127.0.0.1 testpr" > "hosts_new"
mv "hosts_new" "$hosts"
resolvectl query testpr || exit 1
mtime="$(stat -c %y "$hosts")"
echo "127.0.0.1 newhost" > "hosts_tmp"
touch -d "$mtime" "hosts_tmp"
install -p "hosts_tmp" "$hosts"
sleep 10
resolvectl query newhost || exit 1
rm -f "hosts_tmp"
```
Closes#14456.
split() and FOREACH_WORD really should die, and everything be moved to
extract_first_word() and friends, but let's at least make sure that for
the remaining code using it we can't deadlock by not progressing in the
word iteration.
Fixes: #15305
Merging by hand because github refuses merging because "Rebasing the commits of
this branch on top of the base branch cannot be performed automatically as this
would create a different result than a regular merge.".
Consumers of the sd-bus convenience API can't make convenience
helpers of their own without va_list variants.
This commit is a mechanical change splitting out the existing function
bodies into bare va_list variants having a 'v' suffixed to the names.
The original functions now simply create the va_list before forwarding
the call on to the va_list variant, and the va_list variants dispense
with those steps.
The function sd_device_get_property_value has some paths where it exits without
touching the n pointer. In those cases, n remained uninitialized until it was
eventually read inside isempty where it caused the segmentation fault.
Fixes#15078
For now, this function is nearly equivalent to the si_uint64 parser, except for
an additional range check as Linux only takes 32-bit values as bitrates. In
future, this may also be used to introduce fancier bitrate config formats.
sd_bus_reply_method_errno already does the same two checks
(sd_bus_error_is_set(error), r < 0) internally. But it did them in opposite
order. The effect is the same, because sd_bus_reply_method_errno falls back to
sd_bus_reply_method_error, but it seems inelegant. So let's simplify
bus_maybe_reply_error() to offload the job fully to sd_bus_reply_method_errno().
No functional change.
Some fdopendir() calls remain where safe_close() is manually
performed, those could be simplified as well by converting to
use the _cleanup_close_ machinery, but makes things less trivial
to review so left for a future cleanup.
With the addition of _cleanup_close_ there's a repetitious
pattern of assigning -1 to the fd after a successful fdopen
to prevent its close on cleanup now that the FILE * owns the
fd.
This introduces a wrapper that instead takes a pointer to the
fd being opened, and always overwrites the fd with -1 on success.
A future commit will cleanup all the fdopen call sites to use the
wrapper and elide the manual -1 fd assignment.
When we are supposed to accept numeric UIDs formatted as string, then
let's check that first, before passing things on to
valid_user_group_name_full(), since that might log about, and not the
other way round.
See: #15201
Follow-up for: 93c23c9297
