The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
This removes the '@credentials' syscall set that was added in commit
v234-468-gcd0ddf6f75.
Most of these syscalls are so simple that we do not want to filter them.
They work on the current calling process, doing only read operations,
they do not have a deep kernel path.
The problem may only be in 'capget' syscall since it can query arbitrary
processes, and used to discover processes, however sending signal 0 to
arbitrary processes can be used to discover if a process exists or not.
It is unfortunate that Linux allows to query processes of different
users. Lets put it now in '@process' syscall set, and later we may add
it to a new '@basic-process' set that allows most basic process
operations.
Starting with kernel version 4.8 the kernel has a single `l3mdev` rule
that handles this. This rule will be created when the first VRF device
is added.
I think this matches the spirit of "indirect" well: the unit
*might* be active, even though it is not "installed" in the
sense of symlinks created based on the [Install] section.
The changes to test-install-root touch the same lines as in the previous
commit; the change in each case is from
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_ENABLED)
to
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_DISABLED)
to
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_INDIRECT)
in the last two commits.
When a unit has a symlink that makes an alias in the filesystem,
but that name is not specified in [Install], it is confusing
is the unit is shown as "enabled". Look only for names specified
in Alias=.
Fixes#6338.
v2:
- Fix indentation.
- Fix checking for normal enablement, when the symlink name is the same as the
unit name. This case wasn't handled properly in v1.
v3:
- Rework the patch to also handle templates properly:
A template templ@.service with DefaultInstance=foo will be considered
enabled only when templ@foo.service symlink is found. Symlinks with
other instance names do not count, which matches the logic for aliases
to normal units. Tests are updated.
The <!-- --> comment lines resulted in double newlines in the man page
header, which looks quite ugly. Let's rearrange a bit so that these
comments don't result in changes in the output.
This adds a new setting LineMax= to journald.conf, and sets it by
default to 48K. When we convert stream-based stdout/stderr logging into
record-based log entries, read up to the specified amount of bytes
before forcing a line-break.
This also makes three related changes:
- When a NUL byte is read we'll not recognize this as alternative line
break, instead of silently dropping everything after it. (see #4863)
- The reason for a line-break is now encoded in the log record, if it
wasn't a plain newline. Specifically, we distuingish "nul",
"line-max" and "eof", for line breaks due to NUL byte, due to the
maximum line length as configured with LineMax= or due to end of
stream. This data is stored in the new implicit _LINE_BREAK= field.
It's not synthesized for plain \n line breaks.
- A randomized 128bit ID is assigned to each log stream.
With these three changes in place it's (mostly) possible to reconstruct
the original byte streams from log data, as (most) of the context of
the conversion from the byte stream to log records is saved now. (So,
the only bits we still drop are empty lines. Which might be something to
look into in a future change, and which is outside of the scope of this
work)
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=86465
See: #4863
Replaces: #4875
The documentation explained that the message doesn't really mean what it says,
but I think it's better to just make the message more straightforward.
Fixes#6554.
closes#6854
tcp-segmentation-offload: off
tx-tcp-segmentation: off
tx-tcp-ecn-segmentation: off [fixed]
tx-tcp-mangleid-segmentation: off
tx-tcp6-segmentation: off <==========================
Typically when DHCP server sets MTU it is a lower one. And a lower than usual
MTU is then thus required on said network to have operational networking. This
makes networkd's dhcp client to work in more similar way to other dhcp-clients
(e.g. isc-dhcp). In particular, in a cloud setting, without this default
instances have resulted in timing out talking to cloud metadata source and
failing to provision.
This does not change this default for the Annonymize code path.
For the session identifier, the code is currently slightly stricter, because it
only uses digits and letters, than the description. This should be OK.
Fixes#6745.
The document on the wiki is partially outdated and not very visible. Let's
import the gist of it here. The original text is retained, with only grammar
and stylistic and formatting changes.
We settled on "filename" and "file system", so change a couple of places for
consistency. The exception is when there's an adjective before "file" that
binds more strongly then "name": "password file name", "output file name", etc.
Those cases are left intact.
Usually, it's a good thing that we isolate the kernel session keyring
for the various services and disconnect them from the user keyring.
However, in case of the cryptsetup key caching we actually want that
multiple instances of the cryptsetup service can share the keys in the
root user's user keyring, hence we need to be able to disable this logic
for them.
This adds KeyringMode=inherit|private|shared:
inherit: don't do any keyring magic (this is the default in systemd --user)
private: a private keyring as before (default in systemd --system)
shared: the new setting
That advice is generally apropriate for "user" programs, i.e. programs which
are run interactively and used pipelines and such. But it makes less sense for
daemons to propagate the exit signal. For example, if a process receives a SIGTERM,
it is apropriate for it to exit with 0 code. So let's just delete the whole
paragraph, since this page doesn't seem to be the right place for the longer
discussion which would be required to mention all the caveats and considerations.
Fixes#6415.
This reverts commit 0ffddc6e2c. That
causes a rather severe disruption of D-Bus and other services when e. g.
restarting local-fs.target (as spotted by the "storage" test regression).
Fixes#6834
If two separate log streams are connected to stdout and stderr, let's
make sure $JOURNAL_STREAM points to the latter, as that's the preferred
log destination, and the environment variable has been created in order
to permit services to automatically upgrade from stderr based logging to
native journal logging.
Also, document this behaviour.
Fixes: #6800
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
