The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
Previously, if a PTR query is seen for a non-existing record, we'd
generate an empty response (but not NXDOMAIN or so). Fix that. If we
have no data about an IP address, then let's say so, so that the
original error is returned, instead of anything synthesized.
Fixes: #6543
Let's ensure that "no gateway" translates to "no domain", instead of an
empty reply. This is in line with what nss-myhostname does in the same
case, hence let's unify behaviour here of nss-myhostname and resolved.
This changes the symbolic name for the default gateway from "gateway" to
"_gateway". A new configuration option -Dcompat-gateway-hostname=true|false
is added. If it is set, the old name is also supported, but the new name
is used as the canonical name in either case. This is intended as a temporary
measure to make the transition easier, and the option should be removed
after a few releases, at which point only the new name will be used.
The old "gateway" name mostly works OK, but hasn't gained widespread acceptance
because of the following (potential) conflicts:
- it is completely legal to have a host called "gateway"
- there is no guarantee that "gateway" will not be registered as a TLD, even
though this currently seems unlikely. (Even then, there would be no
conflict except for the case when the top-level domain itself was being resolved.
The "gateway" or "_gateway" labels have only special meaning when the
whole name consists of a single label, so resolution of any subdomain
of the hypothetical gateway. TLD would still work OK. )
Moving to "_gateway" avoids those issues because underscores are not allowed
in host names (RFC 1123, §2.1) and avoids potential conflicts with local or
global names.
v2:
- simplify the logic to hardcode "_gateway" and allow
-Dcompat-gateway-hostname=true as a temporary measure.
As a follow-up for db3f45e2d2 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
https://tools.ietf.org/html/rfc5891#section-4.2.3.1 says that
> The Unicode string MUST NOT contain "--" (two consecutive hyphens) in the third
> and fourth character positions and MUST NOT start or end with a "-" (hyphen).
This means that libidn2 refuses to encode such names.
Let's just resolve them without trying to use IDN.
Actually the caller of dns_packet_new() pass 0 or the data size of the UDP message.
So try to reflect that, so rename the `mtu` parameter to `min_alloc_dsize`.
In fact `mtu` is the size of the whole UDP message, including the UDP header,
and here we just need to pass the size of data (without header). This was confusing.
Also add a check on the requested allocated size, since some caller do not check what is really allocated.
Indeed the function do not allocate more than DNS_PACKET_SIZE_MAX whatever the value of the `mtu` parameter.
As suggested in:
496ae8c84b (commitcomment-22819483)
Let's drop some noise from the logs, as switching between DNS servers is
definitely useful for debugging, but shouldn't get more attention that
that.
dns_packet_new() is sometimes called with mtu == 0, and in that case we should
allocate more than the absolute minimum (which is the dns packet header size),
otherwise we have to resize immediately again after appending the first data to
the packet.
This partially reverts the previous commit.
When DNS is unreliable temporarily, the current implementation will
never improve resend behavior again and switch DNS servers only late
(current maximum timeout is 5 seconds).
We can improve this by biasing the resend_timeout back to the current
RTT when a successful response was received. Next time, a timeout is hit
on this server, it will switch to the next server faster.
Fixes: #5953
The allocation size was calculated in a complicated way, and for values
close to the page size we would actually allocate less than requested.
Reported by Chris Coulson <chris.coulson@canonical.com>.
CVE-2017-9445
libidn2 2.0.0 supports IDNA2008, in contrast to libidn which supports IDNA2003.
https://bugzilla.redhat.com/show_bug.cgi?id=1449145
From that bug report:
Internationalized domain names exist for quite some time (IDNA2003), although
the protocols describing them have evolved in an incompatible way (IDNA2008).
These incompatibilities will prevent applications written for IDNA2003 to
access certain problematic domain names defined with IDNA2008, e.g., faß.de is
translated to domain xn--fa-hia.de with IDNA2008, while in IDNA2003 it is
translated to fass.de domain. That not only causes incompatibility problems,
but may be used as an attack vector to redirect users to different web sites.
v2:
- keep libidn support
- require libidn2 >= 2.0.0
v3:
- keep dns_name_apply_idna caller dumb, and keep the #ifdefs inside of the
function.
- use both ±IDN and ±IDN2 in the version string
Since all our python scripts have a proper python3 shebang, there is no benefit
to letting meson autodetect them. On linux, meson will just uses exec(), so the
shebang is used anyway. The only difference should be in how meson reports the
script and that the detection won't fail for (most likely misconfigured)
non-UTF8 locales.
Closes#5855.
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
This is useful on systems like NixOS, where python3 is not in
/usr/bin/python3 as well as for people using alternative ways to
install python such as virtualenv/pyenv.
Also detect libgpg-error. Require both to be present for HAVE_CRYPT,
even though libgpg-error is only used in src/resolve. If one is available,
the other should be too, so it doesn't seem worth the trouble to make two
separate conditions.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This simplifies things and leads to a smaller installation footprint.
libsystemd_internal and libsystemd_journal_internal are linked into
libystemd-shared and available to all programs linked to libsystemd-shared.
libsystemd_journal_internal is not needed anymore, and libsystemd-shared
is used everwhere. The few exceptions are: libsystemd.so, test-engine,
test-bus-error, and various loadable modules.
With mesonbuid/meson#1545, meson does not propagate deps of a library
when linking with that library. That's of course the right thing to do,
but it exposes a bunch of missing deps.
This compiles with both meson-0.39.1 and meson-git + pr/1545.
Tests can be run with 'ninja-build test' or using 'mesontest'.
'-Dtests=unsafe' can be used to include the "unsafe" tests in the
test suite, same as with autotools.
v2:
- use more conf.get guards are optional components
- declare deps on generated headers for test-{af,arphrd,cap}-list
v3:
- define environment for tests
Most test don't need this, but to be consistent with autotools-based build, and
to avoid questions which tests need it and which don't, set the same environment
for all tests.
v4:
- rework test generation
Use a list of lists to define each test. This way we can reduce the
boilerplate somewhat, although the test listings are still pretty verbose. We
can also move the definitions of the tests to the subdirs. Unfortunately some
subdirs are included earlier than some of the libraries that test binaries
are linked to. So just dump all definitions of all tests that cannot be
defined earlier into src/test. The `executable` definitions are still at the
top level, so the binaries are compiled into the build root.
v5:
- tag test-dnssec-complex as manual
v6:
- fix HAVE_LIBZ typo
- add missing libgobject/libgio defs
- mark test-qcow2 as manual
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
This is our own header, we should include use the local-include syntax
("" not <>), to make it clear we are including the one from the build tree.
All other includes of files from src/systemd/ use this scheme.