This partially reverts db11487d10 (the logic to
calculate the correct value is removed, we always use the same setting as for
the system manager). Distributions have an easy mechanism to override this if
they wish.
I think making this configurable is better, because different distros clearly
want different defaults here, and making this configurable is nice and clean.
If we don't make it configurable, distros which either have to carry patches,
or what would be worse, rely on some other configuration mechanism, like
/etc/profile. Those other solutions do not apply everywhere (they usually
require the shell to be used at some point), so it is better if we provide
a nice way to override the default.
Fixes #13469.
Traditionally, user logins had a $PATH in which /bin was before /sbin, while
root logins had a $PATH with /sbin first. This allows the tricks that
consolehelper is doing to work. But even if we ignore consolehelper, having the
path in this order might have been used by admins for other purposes, and
keeping the order in user sessions will make it easier the adoption of systemd
user sessions a bit easier.
Fixes#733.
https://bugzilla.redhat.com/show_bug.cgi?id=1744059
OOM handling in manager_default_environment wasn't really correct.
Now the (theorertical) malloc failure in strv_new() is handled.
Please note that this has no effect on:
- systems with merged /bin-/sbin (e.g. arch)
- when there are no binaries that differ between the two locations.
E.g. on my F30 laptop there is exactly one program that is affected:
/usr/bin/setup -> consolehelper.
There is less and less stuff that relies on consolehelper, but there's still
some.
So for "clean" systems this makes no difference, but helps with legacy setups.
$ dnf repoquery --releasever=31 --qf %{name} --whatrequires usermode
anaconda-live
audit-viewer
beesu
chkrootkit
driftnet
drobo-utils-gui
hddtemp
mate-system-log
mock
pure-ftpd
setuptool
subscription-manager
system-config-httpd
system-config-rootpassword
system-switch-java
system-switch-mail
usermode-gtk
vpnc-consoleuser
wifi-radar
xawtv
prefix_root() is equivalent to path_join() in almost all ways, hence
let's remove it.
There are subtle differences though: prefix_root() will try shorten
multiple "/" before and after the prefix. path_join() doesn't do that.
This means prefix_root() might return a string shorter than both its
inputs combined, while path_join() never does that. I like the
path_join() semantics better, hence I think dropping prefix_root() is
totally OK. In the end the strings generated by both functon should
always be identical in terms of path_equal() if not streq().
This leaves prefix_roota() in place. Ideally we'd have path_joina(), but
I don't think we can reasonably implement that as a macro. or maybe we
can? (if so, sounds like something for a later PR)
Also add in a few missing OOM checks
We should probably drop path_join() entirely in the long run (and
then rename path_join_many() to it?), but for now let's make one a
wrapper for the other.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
The function is similar to path_kill_slashes() but also removes
initial './', trailing '/.', and '/./' in the path.
When the second argument of path_simplify() is false, then it
behaves as the same as path_kill_slashes(). Hence, this also
replaces path_kill_slashes() with path_simplify().
We don't know what the container payload needs, hence default to a PATH
with both bin and sbin included, as well as / and /usr.
Follow-up for #8324Fixes: #8698
We check the same condition at various places. Let's add a trivial,
common helper for this, and use it everywhere.
It's not going to make things much faster or much shorter, but I think a
lot more readable
The NULSTR_FOREACH iterator needs to see an empty string at the end, so
we need to insert an extra NUL explicitly.
Also update PATH0_BIN_SBIN(x) to include an extra NUL terminator, rename
it to PATH_BIN_SBIN_NULSTR(x), which is more consistent with the similar
CONF_PATHS_NULSTR(x) macro.
Fixes: 5008da1ec1
Absolute paths make everything simple and quick, but sometimes this requirement
can be annoying. A good example is calling 'test', which will be located in
/usr/bin/ or /bin depending on the distro. The need the provide the full path
makes it harder a portable unit file in such cases.
This patch uses a fixed search path (DEFAULT_PATH which was already used as the
default value of $PATH), and if a non-absolute file name is found, it is
immediately resolved to a full path using this search path when the unit is
loaded. After that, everything behaves as if an absolute path was specified. In
particular, the executable must exist when the unit is loaded.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
The kernel will reply with -ENOTDIR when we try to access a non-directory under
a name which ends with a slash. But our functions would strip the trailing slash
under various circumstances. Keep the trailing slash, so that
path_is_mount_point("/path/to/file/") return -ENOTDIR when /path/to/file/ is a file.
Tests are added for this change in behaviour.
Also, when called with a trailing slash, path_is_mount_point() would get
"" from basename(), and call name_to_handle_at(3, "", ...), and always
return -ENOENT. Now it'll return -ENOTDIR if the mount point is a file, and
true if it is a directory and a mount point.
v2:
- use strip_trailing_chars()
v3:
- instead of stripping trailing chars(), do the opposite — preserve them.
Already, path_is_safe() refused paths container the "." dir. Doing that
isn't strictly necessary to be "safe" by most definitions of the word.
But it is necessary in order to consider a path "normalized". Hence,
"path_is_safe()" is slightly misleading a name, but
"path_is_normalize()" is more descriptive, hence let's rename things
accordingly.
No functional changes.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
This new helper removes a leading /dev if there is one. We have code
doing this all over the place, let's unify this, and correct it while
we are at it, by using path_startswith() rather than startswith() to
drop the prefix.
This adds a concept of "extrinsic" mounts. If mounts are extrinsic we consider
them managed by something else and do not add automatic ordering against
umount.target, local-fs.target, remote-fs.target.
Extrinsic mounts are considered:
- All mounts if we are running in --user mode
- API mounts such as everything below /proc, /sys, /dev, which exist from
earliest boot to latest shutdown.
- All mounts marked as initrd mounts, if we run on the host
- The initrd's private directory /run/initrams that should survive until last
reboot.
This primarily merges a couple of different exclusion lists into a single
concept.
Let's use chase_symlinks() everywhere, and stop using GNU
canonicalize_file_name() everywhere. For most cases this should not change
behaviour, however increase exposure of our function to get better tested. Most
importantly in a few cases (most notably nspawn) it can take the correct root
directory into account when chasing symlinks.
Allowed paths are unified betwen the configuration file parses and the bus
property checker. The biggest change is that the bus code now allows "block-"
and "char-" classes. In addition, path_startswith("/dev") was used in the bus
code, and startswith("/dev") was used in the config file code. It seems
reasonable to use path_startswith() which allows a slightly broader class of
strings.
Fixes#3935.
In standard linux parlance, "hidden" usually means that the file name starts
with ".", and nothing else. Rename the function to convey what the function does
better to casual readers.
Stop exposing hidden_file_allow_backup which is rather ugly and rewrite
hidden_file to extract the suffix first. Note that hidden_file_allow_backup
excluded files with "~" at the end, which is quite confusing. Let's get
rid of it before it gets used in the wrong place.
Zbigniew Jędrzejewski-Szmek