This is partially a refactoring, but also makes many more places use
unlocked operations implicitly, i.e. all users of fopen_temporary().
AFAICT, the uses are always for short-lived files which are not shared
externally, and are just used within the same context. Locking is not
necessary.
The second name was used in documentation, and the first in the code that
generated the unit. 'systemd-makefs' is the name we want, for example for
consistency with the systemd-makefs executable.
In principle this breaks compatibility, but in practice this is unlikely to be
noticeable. Each instance of the unit is created by writing out a full
definition, so the template was never defined. So the name could only be used
for ordering, and there is not reason to order things against this unit from
the outside: the ordering would rather be against the final mount unit.
Fixes#11769.
Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab,
and possibly masking this condition if it should be enabled for auto gpt stuff,
just pull it in explicitly when required.
Otherwise a "reboot" or "poweroff" in the initramfs will have to wait
until systemd-fsck-root.service has completed, which might never happen
if the root device never shows up.
Ideally, coccinelle would strip unnecessary braces too. But I do not see any
option in coccinelle for this, so instead, I edited the patch text using
search&replace to remove the braces. Unfortunately this is not fully automatic,
in particular it didn't deal well with if-else-if-else blocks and ifdefs, so
there is an increased likelikehood be some bugs in such spots.
I also removed part of the patch that coccinelle generated for udev, where we
returns -1 for failure. This should be fixed independently.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
I opted to completely generate a unit for both mount points and swaps. For
swaps, it would be possible to use fixed template unit like systemd-mkswap@.service,
because there's no information passed except the device name. For mount points,
that's not possible because both the device name and file system type need to
be passed. Nevertheless, I expect that options will need to passed to both mkfs
and mkswap, in which case it'll be necessary to create units of both types
anyway.
Let's always escape strings we receive from the user before writing them
out to unit file settings that suppor specifier expansion, so that user
strings are transported as-is.
If you specify "x-systemd.device-timeout" for an NFS mount
point, you get no warning and a meaningless device unit
dependency created.
Better to have a warning and no dependency.
generator_add_symlink() is extended to ignore EEXIST. This should be fine
for all existing callers.
There's a small difference in behaviour when adding symlinks in sysv-generator:
the message is more generic and does not include ", ignored". But creation of
symlinks shouldn't ever fail except if things are very wrong, so in practice
this shouldn't matter.
Test needed updating: os.path.exists(os.readlink(link)) only works if the link
is absolute (or if we are in the right directory). Let's just use
os.path.exists(link), which properly tests that the symlink target exists.
It seems that there's a common pattern among the various generators. Let's add
a helper function for it and make use of it in cryptsetup-generator.
This fixes a bunch of theoretical memleaks in error paths, since *to wasn't
generally freed properly. Not thath it matters.
This extends 2d79a0bbb9 to the kernel
command line parsing.
The parsing is changed a bit to only understand "0" as infinity. If units are
specified, parse normally, e.g. "0s" is just 0. This makes it possible to
provide a zero timeout if necessary.
Simple test is added.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1462378.
In case the device field of fstab record is an actual device (not an address)
apply same dependencies to the device unit as to the mount unit, i.e.
> After=network-online.target network.target
> Wants=network-online.targe
It makes sense to start the device expecting job only when network is actually
ready (consider e.g. iSCSI devices) since it is device's implicit dependency.
The eventual implementation should better obtain network flag from udev
database and would also take into account device hierarchy (see [1]).
This patch approximates that by taking the `_netdev` option as a hint from the
user both about the filesystem and underlying device. (For local devices with
network filesystems (e.g. ocfs2), this hint leads to unused dependencies.)
[1] https://lists.freedesktop.org/archives/systemd-devel/2014-October/024718.html
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
There was no need for such conversion and it was actually wrong since
any device timeout less than a second was converted into 0 which means
waits forever.
The initrd version of systemd-fsck-root.service must wait for
local-fs-pre.target just like systemd-fsck@.service to prevent
modifications to the filesystem prior to resuming from hibernation.
As-is my laptop routinely fails to resume due to fsck errors. The rest
of the time it is probably silently corrupting the filesystem.
Unlike normal boot, in the initrd systemd-fsck-root.service has no
special significance so it needs to be kept in sync with
systemd-fsck@.service. The name systemd-fsck-root.service is only used
to preserve state across switch-root.
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
Modernize the code a bit:
- Get rid of FOREACH_WORD_SEPARATOR() loop in favour of a
extract_first_word() loop.
- Remove find_binary()'s "local" flag. It's not reasonably possible to
look for binaries on remote systems, we hence should not pretend we
could.
- When we cannot find a suitable binary, return the last error returned
from access() rather than ENOENT unconditionally.
- Rework fsck_exists() and mkfs_exists() to return 1 on success, 0 if
the implementation is missing and negative on real errors. This is
more like we do it in other functions.
- Make sure we also detect direct fsck symlinks to "true", rather than
just absolute ones to /bin/true.
In the initrafms, generate a systemd-fsck-root.service to replace
systemd-fsck@<sysroot-device>.service. This way, after we transition
to the real root, systemd-fsck-root.service is marked as already done.
This introduces an unnecessary synchronization point, because
systemd-fsck@* is ordered after systemd-fsck-root also in the
initramfs. In practice this shouldn't be a problem.
https://bugzilla.redhat.com/show_bug.cgi?id=1201979
C.f. 956eaf2b8d.
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
This makes it obvious that those functions are only usable in the
initramfs.
Also, add a warning when noauto, nofail, or automount is used for the
root fs, instead of silently ignoring. Using those options would be a
sign of significant misconfiguration, and if we bother to check for
them, than let's go all the way and complain.
Other various small cleanups and reformattings elsewhere.
And other non-device entries (like fstab does).
Mount whatever the user asked to be mounted on / on the kernel
command line. Do less sanity check and do *not* bail out
when the mount device looks strange or does not exist.
This basically makes the changes for deviceless filesystems
from yesterday unnecessary and is in line with what we do for
filesystems set up in fstab.
Remove some code that is now dead (reverting fb02a2775a and
b0438462).
[tomegun:
- change patch title/description a bit.
- don't touch the /usr logic, that would be a separate change and
we don't currently have a convincing use-case for that.
- don't bail out on /sys ro. This only makes sense in containers,
where we would not be doing this anyway. If there is a use-case
we could consider that as a separate patch.]
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.