":" is prettier, but meson 0.56+ doesn't like it:
src/systemd/meson.build:73: DEPRECATION: ":" is not allowed in test name "cc-sd-bus.h:c", it has been replaced with "_"
src/systemd/meson.build:73: DEPRECATION: ":" is not allowed in test name "cc-sd-bus.h:c-ansi", it has been replaced with "_"
...
Fixes#17568.
RFC: 8415
21.17. Vendor-specific Information Option
This option is used by clients and servers to exchange vendor-
specific information.
The format of the Vendor-specific Information option is:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| OPTION_VENDOR_OPTS | option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| enterprise-number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. vendor-option-data .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 30: Vendor-specific Information Option Format
option-code OPTION_VENDOR_OPTS (17).
option-len 4 + length of vendor-option-data field.
enterprise-number The vendor's registered Enterprise Number as
maintained by IANA [IANA-PEN]. A 4-octet
field containing an unsigned integer.
vendor-option-data Vendor options, interpreted by
vendor-specific code on the clients and
servers. A variable-length field (4 octets
less than the value in the option-len field).
The definition of the information carried in this option is vendor
specific. The vendor is indicated in the enterprise-number field.
Use of vendor-specific information allows enhanced operation,
utilizing additional features in a vendor's DHCP implementation. A
DHCP client that does not receive requested vendor-specific
information will still configure the node's IPv6 stack to be
functional.
The vendor-option-data field MUST be encoded as a sequence of
code/length/value fields of format identical to the DHCP options (see
Section 21.1). The sub-option codes are defined by the vendor
identified in the enterprise-number field and are not managed by
IANA. Each of the sub-options is formatted as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| sub-opt-code | sub-option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. sub-option-data .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 31: Vendor-specific Options Format
sub-opt-code The code for the sub-option. A 2-octet
field.
sub-option-len An unsigned integer giving the length of the
sub-option-data field in this sub-option in
octets. A 2-octet field.
sub-option-data The data area for the sub-option. The
length, in octets, is specified by
sub-option-len.
Multiple instances of the Vendor-specific Information option may
appear in a DHCP message. Each instance of the option is interpreted
according to the option codes defined by the vendor identified by the
Enterprise Number in that option. Servers and clients MUST NOT send
more than one instance of the Vendor-specific Information option with
the same Enterprise Number. Each instance of the Vendor-specific
Information option MAY contain multiple sub-options.
A client that is interested in receiving a Vendor-specific
Information option:
- MUST specify the Vendor-specific Information option in an Option
Request option.
- MAY specify an associated Vendor Class option (see Section 21.16).
- MAY specify the Vendor-specific Information option with
appropriate data.
Servers only return the Vendor-specific Information options if
specified in Option Request options from clients and:
- MAY use the Enterprise Numbers in the associated Vendor Class
options to restrict the set of Enterprise Numbers in the
Vendor-specific Information options returned.
- MAY return all configured Vendor-specific Information options.
- MAY use other information in the packet or in its configuration to
determine which set of Enterprise Numbers in the Vendor-specific
Information options to return.
Back in 08318a2c5a, value "false" was enabled for
'-Dtests=', but various tests were not conditionalized properly. So even with
-Dtests=false -Dslow-tests=false we'd run 120 tests. Let's make this consistent.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
This adds a meson test because it fits nicely into the existing framework.
It should be enough to run this test once in a while, so I don't think it's
crucial to also have it under autotools.
Previous checks did nothing, because cc.has_argument only does compilation,
without any linking. Unfortunately cc.links() cannot be used, because it does
not accept any options. Providing the test file as a static source is easiest,
even if not every elegant.
https://github.com/mesonbuild/meson/issues/1676
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This is more-or-less the same as dist-check-includes. meson doesn't exactly
make it easy to call a compiler with a custom set of options. The tests
are included in the test listing.
This is quite messy. I think libtool might have been using something
like -Wl,--whole-archive, but I don't think meson has support for that.
For now, just recompile all the sources for linking into libsystemd
directly. This should not matter much for efficiency, since it's a
few small files.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
Luca Boccassi