unit_get_status_message_format() is used only with one of JOB_START,
JOB_STOP, JOB_RELOAD, all of which have fallback message strings
defined, so the function may never return NULL.
WRITE_STRING_FILE_ATOMIC is only valid if WRITE_STRING_FILE_CREATE is also
given. IOW, an atomic file write operation is only possible when creating a
file is also being asked for.
This is a regression from the recent write_string_file() rework.
WRITE_STRING_FILE_ATOMIC is only valid if WRITE_STRING_FILE_CREATE is also
given. IOW, an atomic file write operation is only possible when creating a
file is also being asked for.
This is a regression from the recent write_string_file() rework.
The starting/stopping messages are printed to the console only if the
corresponding format string is defined in the unit's vtable. To avoid
excessive messages on the console, the unit types whose start/stop
jobs are instantaneous had the format strings intentionally undefined.
When logging the same event to the journal, a fallback to generic
Starting/Stopping/Reloading messages is used.
The problem of excessive console messages with instantaneous jobs
is already resolved in a nicer way ("core: fix confusing logging of
instantaneous jobs"), so there's no longer a need to have two ways of
getting the format strings. Let's fold them into one function with
the fallback to generic message strings.
Return 1 from *_reload() methods to signify "we did something", just
like in *_start(). This causes "Reloading foo..." messages to be logged.
"Reloaded foo." messages are already logged.
For instantaneous jobs (e.g. starting of targets, sockets, slices, or
Type=simple services) the log shows the job completion
before starting:
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
...
The reason is that the job completes before the ->start() method returns
and only then does unit_start() print the "Starting ..." message.
The same thing happens when stopping units.
Rather than fixing the order of the messages, let's just not emit the
Starting/Stopping message at all when the job completes instantaneously.
The job completion message is sufficient in this case.
If Linux efi stub is used, embedded cmdline in efi stub is
not shown. As a result, it is required to rewrite all the
line, if is only required to modify it. This behavior only
happen using Linux efi stub.
This patch allows boot loader to show embedded cmdline when
'e' key is pressed to edit boot loader options.
If a session is in closing state (and already got rid of its VT), then
never re-select it for that VT. There is no reason why we should grant
something to a session that is already going away *AND* already got rid
of exactly that.
Our seat->positions[] array keeps track of the 'preferred' session on a
VT. The only situation this is used, is to select the session to activate
when a VT is activated. In the normal case, there's only one session per
VT so the selection is trivial.
Older greeters, however, implement take-overs when they start sessions on
the same VT that the greeter ran on. We recently limited such take-overs
to VTs where a greeter is running on, to force people to never share VTs
in new code that is written.
For legacy reasons, we need to be compatible to old greeters, though.
Hence, we allow those greeters to implement take-over. In such take-overs,
however, we should really make sure that the new sessions gets preferred
over the old one under all circumstances. Hence, make sure we override
the previous preferred session with a new session.
The lovely libvirtd goes into crazy mode if it receives broadcasts that
it didn't subscribe to. With bus-proxyd, this might happen in 2 cases:
1) The kernel passes us an unmatched signal due to a false-positive
bloom-match.
2) We generate NameOwnerChanged/NameAcquired/NameLost locally even
though the peer didn't subscribe to it.
dbus-daemon is reliable in what signals it passes on. So make sure we
follow that style. Never ever send a signal to a local peer if it doesn't
match an installed filter of that peer.
This adds test-bus-proxy which should be used to test correct behavior of
systemd-bus-proxyd. The first test that was added is to verify we actually
receive NameAcquired signals for ourselves on bus-connect.
While 235c6e6 gets LTO builds running again, it goes back to using fat
LTO objects instead of using gcc-{ar,nm,ranlib}. Building these fat
objects takes significantly more time.
Use the suggested solution and look for gcc-{ar,nm,ranlib}, which launch
the binutils tools with the appropriate --plugin parameter. GCC versions
that do not ship these should either default to -ffat-lto-objects or do
not support LTO at all.
On another note, nm from binutils 2.25 seems to be smart enough to load
the LTO plugin when needed without having to specify --plugin.
If the caller does not specify arg1 for NameOwnerChanged matches, we
really must take the ID from arg2 or arg3, if provided. They are
guaranteed to be identical to arg1 if either is supplied, but there is no
strict requiredment that arg1 is supplied. Hence, make sure to always
take the more restrictive match. Otherwise, we install rather wide
matches without anyone requiring them.
Make sure we don't install NameOwnerChanged matches if the caller passed
a destination='' match (except if it is the broadcast address). Per spec,
all NameOwnerChanged signals are broadcasts.
Only the NameLost/NameAcquired signals are unicasts, but those are never
received through sd-bus. Instead, the bus-proxy synthesizes them and it
already installs proper matches for them.
Reuse the Iterator object from hashmap.h and expose a similar API.
This allows us to do
{
Iterator i;
unsigned n;
BITMAP_FOREACH(n, b, i) {
Iterator j;
unsigned m;
BITMAP_FOREACH(m, b, j) {
...
}
}
}
without getting confused. Requested by David.
In gvariant, all fixed-size objects need to be sized a multiple of their
alignment. If a structure has only fixed-size members, it is required to
be fixed size itself. If you imagine a structure like (ty), you have an
8-byte member followed by an 1-byte member. Hence, the overall inner-size
is 9. The alignment of the object is 8, though. Therefore, the specs
mandates final padding after fixed-size structures, to make sure it's
sized a multiple of its alignment (=> 16).
On the gvariant decoder side, we already account for this in
bus_gvariant_get_size(), as we apply overall padding to the size of the
structure. Therefore, our decoder correctly skips such final padding when
parsing fixed-size structure.
On the gvariant encoder side, however, we don't account for this final
padding. This patch fixes the structure and dict-entry encoders to
properly place such padding at the end of non-uniform fixed-size
structures.
The problem can be easily seen by running:
$ busctl --user monitor
and
$ busctl call --user org.freedesktop.systemd1 / org.foobar foobar "(ty)" 777 8
The monitor will fail to parse the message and print an error. With this
patch applied, everything works fine again.
This patch also adds a bunch of test-cases to force non-uniform
structures with non-pre-aligned positions.
Thanks to Jan Alexander Steffens <jan.steffens@gmail.com> for spotting
this and narrowing it down to non-uniform gvariant structures. Fixes#597.
This target allows to trigger a build of $(BUILT_SOURCES) manually. This
is handy if you tend to use 'make systemd-foobar' to directly build a
single binary. Those do not pull in $(BUILT_SOURCES), unfortunately. See
automake docs for that.
So right now our object-tree is limited to 2 levels at most
('/' and '/foo/...../bar'). We never link any intermediate levels, even
though that was clearly the plan. Fix the bus_node_allocate() helper to
actually link all intermediate nodes, too, not just the root node.
This fixes a simple inverse ptr-diff bug.
The downside of this fix is that we clearly never tested (nor used) the
object tree in any way. The only reason that the introspection works is
that our enumerators shortcut the object tree.
Lets see whether that code actually works..
Thanks to: Nathaniel McCallum <nathaniel@themccallums.org>
..for reporting this. See #524 for an actual example code.
It is highly confusing if a getter function returns 0, but the value is
set to NULL. This, right now, triggers assertions as code relies on the
returned values to be non-NULL.
Like with sd-bus-creds and friends, return 0 only if a value is actually
available.
Discussed with Tom, and actually fixes real bugs as in #512.
If /etc/machine-id is missing (eg., gold images), we should not fail
installing sd-boot. This is a perfectly fine use-case and we should simply
skip installing the default loader config in that case.
