job_compare return value is undefined in case the jobs have a loop
between them, so better make a test to make sure transaction cycle
detection catches it.
The test-engine Test2 tests the cycle detection when units a, b and d
all start at once
,-------------------after-----------------,
v |
a/start ---after---> d/start ---after---> b/start
Extend the test with Test11 that adds i.service which causes a and d
stop (by unordered Conflicts=) while starting b. Because stops precede
starts, we effectively eliminate the job cycle and all transaction jobs
should be applicable.
,-------------------after-----------------,
v |
a/stop <---after--- d/stop <---after--- b/start
. . ^
. . |
'. . . . . . . . . i/start ---after------'
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Doing manager_load_unit() followed by UNIT_VTABLE(unit)->start(unit) would
result in an assertion failure in ->start() if the unit failed to load
properly. Something like this is okey-ish is tests, since the test units are
not expected to fail to load, but the reason for failure is clearer if we
fail immediately.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
When running tests like test-unit-name, there is not point in setting
up the cgroup and signals and interacting with the environment. Similarly
when running fuzz testing of the parser.
Add new MANAGER_TEST_RUN_BASIC which takes the role of MANAGER_TEST_RUN_MINIMAL,
and redefine MANAGER_TEST_RUN_MINIMAL to just create the basic data structures.
Now generators are only run in systemd --test mode, where this makes
most sense (how are you going to test what would happen otherwise?).
Fixes#6842.
v2:
- rename test_run to test_run_flags
Without this "meson test" will end up running all tests in the same
cgroup root, and they all will try to manage it. Which usually isn't too
bad, except when they end up clearing up each other's cgroups. This race
is hard to trigger but has caused various CI runs to fail spuriously.
With this change we simply move every test that runs a manager object
into their own private cgroup. Note that we don't clean up the cgroup at
the end, we leave that to the cgroup manager around it.
This fixes races that become visible by test runs throwing out errors
like this:
```
exec-systemcallfilter-failing.service: Passing 0 fds to service
exec-systemcallfilter-failing.service: About to execute: /bin/echo 'This should not be seen'
exec-systemcallfilter-failing.service: Forked /bin/echo as 5693
exec-systemcallfilter-failing.service: Changed dead -> start
exec-systemcallfilter-failing.service: Failed to attach to cgroup /exec-systemcallfilter-failing.service: No such file or directory
Received SIGCHLD from PID 5693 ((echo)).
Child 5693 ((echo)) died (code=exited, status=219/CGROUP)
exec-systemcallfilter-failing.service: Child 5693 belongs to exec-systemcallfilter-failing.service
exec-systemcallfilter-failing.service: Main process exited, code=exited, status=219/CGROUP
exec-systemcallfilter-failing.service: Changed start -> failed
exec-systemcallfilter-failing.service: Unit entered failed state.
exec-systemcallfilter-failing.service: Failed with result 'exit-code'.
exec-systemcallfilter-failing.service: cgroup is empty
Assertion 'service->main_exec_status.status == status_expected' failed at ../src/src/test/test-execute.c:71, function check(). Aborting.
```
BTW, I tracked this race down by using perf:
```
# perf record -e cgroup:cgroup_mkdir,cgroup_rmdir
…
# perf script
```
Thanks a lot @iaguis, @alban for helping me how to use perf for this.
Fixes#5895.
Drop the TEST_DATA_DIR macro as this was using alloca() within a
function call which is allegedly unsafe. So add a "suffix" argument to
get_testdata_dir() instead and call that directly.
That way, if the test directory does not exist we don't leave behind
temporary files (as in that case or on test failure the cleanup actions
don't run).
It is useful to package test-* binaries and run them as root under
autopkgtest or manually on particular machines. They currently have a
built-in hardcoded absolute path to their test data, which does not work
when running the test programs from any other path than the original
build directory.
By default, make the tests look for their data in
<test_exe_directory>/testdata/ so that they can be called from any
directory (provided that the corresponding test data is installed
correctly). As we don't have a fixed static path in the build tree (as
build and source tree are independent), set $TEST_DIR with "make check"
to point to <srcdir>/test/, as we previously did with an automake
variable.
We don#t really support systems where XDG_RUNTIME_DIR is not supported for
systemd --user. Hence, let's always set our own XDG_RUNTIME_DIR for tests that
involve systemd --user, so that we know it is set, and that it doesn't polute
the user's actual runtime dir.
Previously, we had two enums ManagerRunningAs and UnitFileScope, that were
mostly identical and converted from one to the other all the time. The latter
had one more value UNIT_FILE_GLOBAL however.
Let's simplify things, and remove ManagerRunningAs and replace it by
UnitFileScope everywhere, thus making the translation unnecessary. Introduce
two new macros MANAGER_IS_SYSTEM() and MANAGER_IS_USER() to simplify checking
if we are running in one or the user context.
We need to check the same thing in multiple tests. Use a shared
macro to make it easier to update the list of errnos.
Change the errno code for "unitialized cgroup fs" for ENOMEDIUM.
Exec format error looks like something more serious.
This fixes test-execute invocation in mock.
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
Now that we don't have RequiresOverridable= and RequisiteOverridable=
dependencies anymore, we can get rid of tracking the "override" boolean
for jobs in the job engine, as it serves no purpose anymore.
While we are at it, fix some error messages we print when invoking
functions that take the override parameter.
Commit efdb023 ("core: unified cgroup hierarchy support") introduced a new
error ENOEXEC in cg_unified() if /sys/fs/cgroup/ is not available. Adjust the
"skip" checks in various tests accordingly.
Add a corresponding "skip" check to test-bus-creds as well, as
sd_bus_creds_new_from_pid() now calls cg_unified() as well.
This re-fixes "make check" in build chroots without /sys/fs/cgroup.
https://github.com/systemd/systemd/issues/1132
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
The error code is called EDEADLK, stop using legacy names like EDEADLOCK.
Note that _some_ weird architectures define them differently (namely, mips
and sparc), but on all sane architectures they're exactly the same. So
stay with the widely used code, which is EDEADLK.
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
__attribute__((used)) is not enough to force static variables to
be carried over to a compiled program from a library. Mappings defined
in libsystemd-shared.a were not visible in the compiled binaries.
To ensure that the mappings are present in the final binary, the
tables are made non-static and are given a real unique name by which
they can be referenced.
To use a mapping defined not in the local compilation unit (e.g. in
a library) a reference to the mapping table is added. This is done
by including a declaration in the header file.
Expected values in test-engine are fixed to reflect the new mappings.
FAIL: test-engine
=================
Cannot find cgroup mount point: No such file or directory
Assertion 'r >= 0' failed at ../src/test/test-engine.c:46, function main(). Aborting.
FAIL: test-sched-prio
=====================
Cannot find cgroup mount point: No such file or directory
Assertion 'r >= 0' failed at ../src/test/test-sched-prio.c:42, function main(). Aborting.
FAIL: test-bus-cleanup
======================
Assertion 'sd_bus_open_system(&bus) >= 0' failed at ../src/libsystemd/sd-bus/test-bus-cleanup.c:40, function test_bus_open(). Aborting.
after new: refcount 1
Also add a bit of debugging output to help diagnose problems,
add missing units, and simplify cppflags.
Move test-engine to normal tests from manual tests, it should now
work without destroying the system.
