Both 'systemd-hwdb update' and 'udevadm hwdb --update' creates hwdb
database. The database created by systemd-hwdb containes additional
information such that priority, line number, and source filename.
The unified function 'hwdb_update()' can take a flag 'compat' which
controls the format version of created database.
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/
networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/
Example conf:
/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
```
/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```
$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
--machine has been missing for a while in systemd-stdio-bridge
this syntax can be switched to be more standard.
v2: Support the old syntax too.
timedatectl -H server1.myhostingcompany.com:5555/container1
Closes: #8071
We would verify destination e.g. in sd_bus_message_new_call, but allow setting
any value later on with sd_bus_message_set_destination. I assume this check was
omitted not on purpose.
When a nested struct is initialized by structured initializer, then
padding space is not cleared by zero. So, before setting values,
this makes explicitly set zero including padding.
This fixes the following false positive warning by valgrind:
```
==492== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==492== at 0x56D0CF7: sendmsg (in /usr/lib64/libpthread-2.27.so)
==492== by 0x4FDD3C5: sd_resolve_getaddrinfo (sd-resolve.c:975)
==492== by 0x110B9E: manager_connect (timesyncd-manager.c:879)
==492== by 0x10B729: main (timesyncd.c:165)
==492== Address 0x1fff0008f1 is on thread 1's stack
==492== in frame #1, created by sd_resolve_getaddrinfo (sd-resolve.c:928)
==492==
```
machined exposes the pseudo-container ".host" as a reference to the host
system, and this means "machinectl login .host" and "machinectl shell
.host" get your a login/shell on the host. systemd-run currently doesn't
allow that. Let's fix that, and make sd-bus understand ".host" as an
alias for connecting to the host system.
This makes bus_slot_disconnect() unref the slot object from bus when
`unref == true` and it is floating, as the function removes the
reference from the relevant bus object.
This reverts 20d4ee2cbc, as it
introduces #9604.
Fixes#9604.
The switch to memory_startswith() changed the logic to only look for a space or
NUL byte after the matched word, but matching the full size should also be
acceptable.
This changed the behavior of parsing of "AUTH\r\n", where m will be set to 4,
since even though the word will match, the check for it being followed by ' '
or NUL will make line_begins() return false.
Tested:
- Using netcat to connect to the private socket directly:
$ echo -ne '\0AUTH\r\n' | sudo nc -U /run/systemd/private
REJECTED EXTERNAL ANONYMOUS
- Running the Ignition blackbox test:
$ sudo sh -c 'PATH=$PWD/bin/amd64:$PATH ./tests.test'
PASS
Fixes: d27b725abf
This adds sd_bus_{get,set}_method_call_timeout().
If the timeout is not set or set to 0, then the timeout value is
parsed from $SYSTEMD_BUS_TIMEOUT= environment variable. If the
environment variable is not set, then built-in timeout is used.
When a slot is disconnected, then slot->match_callback.install_slot
is also disconnected. So, bus_slot_disconnect() removes the install_slot
from the list of slots in bus, although it is a floating object.
This makes install_slot unreffed from bus when it is disconnected.
Fixes#9505 and #9510.
The D-Bus library supplies a va_list variant of
`sd_bus_message_append()` called `sd_bus_message_appendv()`,
but failed to provide a va_list variant of its opposite,
`sd_bus_message_read()`. This commit publicizes a previously static
function as `sd_bus_message_readv()`.
This makes OBJECT_PATH_FOREACH_PREFIX consistent with PATH_FOREACH_PREFIX
and also fixes 7 alerts reported by LGTM at
ac0a087003/files/src/libsystemd/sd-bus/bus-objects.c?sort=name&dir=ASC&mode=heatmap&showExcluded=true#V1383
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Let's always write "1 << 0", "1 << 1" and so on, except where we need
more than 31 flag bits, where we write "UINT64(1) << 0", and so on to force
64bit values.
Since bb28e68477 parsing failures of
certain unit file settings will result in load failures of units. This
introduces a new load state "bad-setting" that is entered in precisely
this case.
With this addition error messages on bad settings should be a lot more
explicit, as we don't have to show some generic "errno" error in that
case, but can explicitly say that a bad setting is at fault.
Internally this unit load state is entered as soon as any configuration
loader call returns ENOEXEC. Hence: config parser calls should return
ENOEXEC now for such essential unit file settings. Turns out, they
generally already do.
Fixes: #9107
This adds a function sd_bus_slot_set_destroy_callback() to set a function
which can free userdata or perform other cleanups.
sd_bus_slot_get_destory_callback() queries the callback, and is included
for completeness.
Without something like this, for floating asynchronous callbacks, which might
be called or not, depending on the sequence of events, it's hard to perform
resource cleanup. The alternative would be to always perform the cleanup from
the caller too, but that requires more coordination and keeping of some shared
state. It's nicer to keep the cleanup contained between the callback and the
function that requests the callback.
This tests a couple of corner cases of the sd-event API including
changing priorities of existing event sources, as well as overflow
conditions of the inotify queue.
This adds a new call sd_event_add_inotify() which allows watching for
inotify events on specified paths.
sd-event will try to minimize the number of inotify fds allocated, and
will try to add file watches to the same inotify fd objects as far as
that's possible. Doing this kind of inotify object should optimize
behaviour in programs that watch a limited set of mostly independent
files as in most cases a single inotify object will suffice for watching
all files.
Traditionally, this kind of coalescing logic (i.e. that multiple event
sources are implemented on top of a single inotify object) was very hard
to do, as the inotify API had serious limitations: it only allowed
adding watches by path, and would implicitly merge watches installed on
the same node via different path, without letting the caller know about
whether such merging took place or not.
With the advent of O_PATH this issue can be dealt with to some point:
instead of adding a path to watch to an inotify object with
inotify_add_watch() right away, we can open the path with O_PATH first,
call fstat() on the fd, and check the .st_dev/.st_ino fields of that
against a list of watches we already have in place. If we find one we
know that the inotify_add_watch() will update the watch mask of the
existing watch, otherwise it will create a new watch. To make this
race-free we use inotify_add_watch() on the /proc/self/fd/ path of the
O_PATH fd, instead of the original path, so that we do the checking and
watch updating with guaranteed the same inode.
This approach let's us deal safely with inodes that may appear under
various different paths (due to symlinks, hardlinks, bind mounts, fs
namespaces). However it's not a perfect solution: currently the kernel
has no API for changing the watch mask of an existing watch -- unless
you have a path or fd to the original inode. This means we can "merge"
the watches of the same inode of multiple event sources correctly, but
we cannot "unmerge" it again correctly in many cases, as access to the
original inode might have been lost, due to renames, mount/unmount, or
deletions. We could in theory always keep open an O_PATH fd of the inode
to watch so that we can change the mask anytime we want, but this is
highly problematics, as it would consume too many fds (and in fact the
scarcity of fds is the reason why watch descriptors are a separate
concepts from fds) and would keep the backing mounts busy (wds do not
keep mounts busy, fds do). The current implemented approach to all this:
filter in userspace and accept that the watch mask on some inode might
be higher than necessary due to earlier installed event sources that
might have ceased to exist. This approach while ugly shouldn't be too
bad for most cases as the same inodes are probably wacthed for the same
masks in most implementations.
In order to implement priorities correctly a seperate inotify object is
allocated for each priority that is used. This way we get separate
per-priority event queues, of which we never dequeue more than a few
events at a time.
Fixes: #3982
The function is similar to path_kill_slashes() but also removes
initial './', trailing '/.', and '/./' in the path.
When the second argument of path_simplify() is false, then it
behaves as the same as path_kill_slashes(). Hence, this also
replaces path_kill_slashes() with path_simplify().
This "netdevsim" as implied by the name is a tool for network developers and is a simulator.
This simulated networking device is used for testing various networking APIs and at this time
is particularly focused on testing hardware offloading related interfaces.
We currently return -ENOMEDIUM when /etc/machine-id is empty, and -EINVAL when
it is all zeros. But -EINVAL is also used for invalid args. The distinction
between empty and all-zero is not very important, let's use the same return
code.
Also document -ENOENT and -ENOMEDIUM since they can be a bit surprising.
When we allocate an asynchronous match object we will allocate an
asynchronous bus call object to install the match server side.
Previously the call slot would be created as regular slot, i.e.
non-floating which meant installing the match even if it was itself
floating would result in a non-floating slot to be created internally,
which ultimately would mean the sd_bus object would be referenced by it,
and thus never be freed.
Let's fix that by making the match method callback floating in any case
as we have no interest in leaving the bus allocated beyond the match
slot.
Fixes: #8551
This new call allows explicit control of the "floating" state of a bus
slot object. This is useful for creating a bus slot object first,
retaining a reference to it, using it for making changes to the slot
object (for example, set a description) and then handing it over to
sd-bus for lifecycle management.
It's also useful to fix#8551.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
Most our other parsing functions do this, let's do this here too,
internally we accept that anyway. Also, the closely related
load_env_file() and load_env_file_pairs() also do this, so let's be
systematic.
Let's tweak the assignment of errors a bit, and automatically abs()
errnos, similar to how log_error_errno() and friends does it.
Macros are fine to use, but regular functions usually preferable if
there's no reason to use macros, because they avoid multiple evaluation
and suchlike. Hence, let's just use a regular funciton for assigning
errors, instead of macros.
Follow-up for #8993