DNSSEC validation takes the system clock into account to validate
signatures. This means if we had incorrect time and the time is then
changed to the correct one we should flush out everything and
re-validate taking the new time into account.
(This logic will also trigger after system suspend, which is not bad
either, given that quite possibly we are connected to a different
network, and thus would get different DNS data, without us noticing
otherwise via link beat).
DnsPacket should better be a "dead" object, i.e. list facts, not track
resources. By including an fd in its fields it started tracking
resources however, without actually taking a ref to the fd (i.e. no
dup() or so was called on it).
Let's hence rework things so that we don#t have to keep track of the fd
a packet came in from. Instead, pass around the DnsStubListenerExtra
object wherever we need to.
This should be useful as soon as we start caching whole DnsPacket
objects to allow replying to DNSSEC/CO packets, i.e. where we have to
keep a copy of the original DnsPacket around for a long time in cache,
potentially much longer than the fds the packet was received on.
In various cases, we would say 'return log_warning()' or 'return log_error()'. Those
functions return 0 if no error is passed in. For log_warning or log_error this doesn't
make sense, and we generally want to propagate the error. In the few cases where
the error should be ignored, I think it's better to split it in two, and call 'return 0'
on a separate line.
This allows us to later port nss-resolve to use Varlink rather than
D-Bus for resolution. This has the benefit that nss-resolve based
resoluton works even without D-Bus being up. And it's faster too.
We always need to make them unions with a "struct cmsghdr" in them, so
that things properly aligned. Otherwise we might end up at an unaligned
address and the counting goes all wrong, possibly making the kernel
refuse our buffers.
Also, let's make sure we initialize the control buffers to zero when
sending, but leave them uninitialized when reading.
Both the alignment and the initialization thing is mentioned in the
cmsg(3) man page.
We need to use the CMSG_SPACE() macro to size the control buffers, not
CMSG_LEN(). The former is rounded up to next alignment boundary, the
latter is not. The former should be used for allocations, the latter for
encoding how much of it is actually initialized. See cmsg(3) man page
for details about this.
Given how confusing this is, I guess we don't have to be too ashamed
here, in most cases we actually did get this right.
Let's be extra careful whenever we return from recvmsg() and see
MSG_CTRUNC set. This generally means we ran into a programming error, as
we didn't size the control buffer large enough. It's an error condition
we should at least log about, or propagate up. Hence do that.
This is particularly important when receiving fds, since for those the
control data can be of any size. In particular on stream sockets that's
nasty, because if we miss an fd because of control data truncation we
cannot recover, we might not even realize that we are one off.
(Also, when failing early, if there's any chance the socket might be
AF_UNIX let's close all received fds, all the time. We got this right
most of the time, but there were a few cases missing. God, UNIX is hard
to use)
It's not that I think that "hostname" is vastly superior to "host name". Quite
the opposite — the difference is small, and in some context the two-word version
does fit better. But in the tree, there are ~200 occurrences of the first, and
>1600 of the other, and consistent spelling is more important than any particular
spelling choice.
On certain distributions such as NixOS the mtime of `/etc/hosts` is
locked to a fixed value. In such cases, only checking the last mtime of
`/etc/hosts` is not enough - we also need to check if the st_ino/st_dev
match up. Thus, let's make sure make sure that systemd-resolved also
rereads `/etc/hosts` if the inode or the device containing `/etc/hosts` changes.
Test script:
```bash
hosts="/etc/hosts"
echo "127.0.0.1 testpr" > "hosts_new"
mv "hosts_new" "$hosts"
resolvectl query testpr || exit 1
mtime="$(stat -c %y "$hosts")"
echo "127.0.0.1 newhost" > "hosts_tmp"
touch -d "$mtime" "hosts_tmp"
install -p "hosts_tmp" "$hosts"
sleep 10
resolvectl query newhost || exit 1
rm -f "hosts_tmp"
```
Closes#14456.
We don't need a seperate output parameter that is of type int. glibc() says
that the type is "unsigned", but the kernel thinks it's "int". And the
"alternative names" interface also uses ints. So let's standarize on ints,
since it's clearly not realisitic to have interface numbers in the upper half
of unsigned int range.
Notifications are only sent for the top object, and not for individual
links. This should be enough for the most obvious cases where somebody
just cares about the effective set of servers.
Fixes#13721.
Change the resolved.conf Cache option to a tri-state "no, no-negative, yes" values.
If a lookup returns SERVFAIL systemd-resolved will cache the result for 30s (See 201d995),
however, there are several use cases on which this condition is not acceptable (See systemd#5552 comments)
and the only workaround would be to disable cache entirely or flush it , which isn't optimal.
This change adds the 'no-negative' option when set it avoids putting in cache
negative answers but still works the same heuristics for positive answers.
Signed-off-by: Jorge Niedbalski <jnr@metaklass.org>
Instead of having a context and/or trusted CA list per server this is now moved to the server. Ensures future TLS configuration options are global instead of per server.
RFC7766 section 4 states that in the absence of EDNS0, a response that
is too large for a 512-byte UDP packet will have the 'truncated' bit
set. The client is expected to retry the query over TCP.
Fixes#10264.
https://tools.ietf.org/html/rfc1035#section-2.3.1 says (approximately)
that only letters, numbers, and non-leading non-trailing dashes are allowed
(for entries with A/AAAA records). We set no restrictions.
hosts(5) says:
> Host names may contain only alphanumeric characters, minus signs ("-"), and
> periods ("."). They must begin with an alphabetic character and end with an
> alphanumeric character.
nss-files follows those rules, and will ignore names in /etc/hosts that do not
follow this rule.
Let's follow the documented rules for /etc/hosts. In particular, this makes us
consitent with nss-files, reducing surprises for the user.
I'm pretty sure we should apply stricter filtering to names received over DNS
and LLMNR and MDNS, but it's a bigger project, because the rules differ
depepending on which level the label appears (rules for top-level names are
stricter), and this patch takes the minimalistic approach and only changes
behaviour for /etc/hosts.
Escape syntax is also disallowed in /etc/hosts, even if the resulting character
would be allowed. Other tools that parse /etc/hosts do not support this, and
there is no need to use it because no allowed characters benefit from escaping.
Ideally, coccinelle would strip unnecessary braces too. But I do not see any
option in coccinelle for this, so instead, I edited the patch text using
search&replace to remove the braces. Unfortunately this is not fully automatic,
in particular it didn't deal well with if-else-if-else blocks and ifdefs, so
there is an increased likelikehood be some bugs in such spots.
I also removed part of the patch that coccinelle generated for udev, where we
returns -1 for failure. This should be fixed independently.
Lennart Poettering