It's a bit prettier that day as the function won't silently overwrite
any possibly pre-initialized field, and destroy it right before we
allocate a new event source.
The function is similar to path_kill_slashes() but also removes
initial './', trailing '/.', and '/./' in the path.
When the second argument of path_simplify() is false, then it
behaves as the same as path_kill_slashes(). Hence, this also
replaces path_kill_slashes() with path_simplify().
When "systemctl daemon-reload" is run at the same time as "systemctl
start foo", the latter might hang. That's because commands like start
wait for JobRemoved signal to know when the job is finished. But if the
job is finished during reloading, the signal is never sent.
The hang can be easily reproduced by running
# for ((N=1; N>0; N++)) ; do echo $N ; systemctl daemon-reload ; done
# for ((N=1; N>0; N++)) ; do echo $N ; systemctl start systemd-coredump.socket ; done
in two different terminals. The start command will hang after 1-2
iterations.
This keeps track of jobs that were started before reload and finished
during it and sends JobRemoved after the reload has finished.
We'd write a sequence that was invalid unicode and this caused the d-bus
connection to be terminated:
$ busctl get-property org.freedesktop.systemd1 /org/freedesktop/systemd1/unit/dbus_2esocket org.freedesktop.systemd1.Unit SubState
s "running"
$ busctl get-property org.freedesktop.systemd1 /org/freedesktop/systemd1/unit/dbus_e2socket org.freedesktop.systemd1.Unit SubState
Remote peer disconnected
$ busctl get-property org.freedesktop.systemd1 /org/freedesktop/systemd1/unit/dbus_e2socket org.freedesktop.systemd1.Unit SubState
(hangs)
Fixes#8978.
When I see "test", I have to think three times what the return value
means. With "below" this is immediately clear. ratelimit_below(&limit)
sounds almost like English and is imho immediately obvious.
(I also considered ratelimit_ok, but this strongly implies that being under the
limit is somehow better. Most of the times this is true, but then we use the
ratelimit to detect triple-c-a-d, and "ok" doesn't fit so well there.)
C.f. a1bcaa07.
Previously we were a bit sloppy with the index and size types of arrays,
we'd regularly use unsigned. While I don't think this ever resulted in
real issues I think we should be more careful there and follow a
stricter regime: unless there's a strong reason not to use size_t for
array sizes and indexes, size_t it should be. Any allocations we do
ultimately will use size_t anyway, and converting forth and back between
unsigned and size_t will always be a source of problems.
Note that on 32bit machines "unsigned" and "size_t" are equivalent, and
on 64bit machines our arrays shouldn't grow that large anyway, and if
they do we have a problem, however that kind of overly large allocation
we have protections for usually, but for overflows we do not have that
so much, hence let's add it.
So yeah, it's a story of the current code being already "good enough",
but I think some extra type hygiene is better.
This patch tries to be comprehensive, but it probably isn't and I missed
a few cases. But I guess we can cover that later as we notice it. Among
smaller fixes, this changes:
1. strv_length()' return type becomes size_t
2. the unit file changes array size becomes size_t
3. DNS answer and query array sizes become size_t
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76745
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Currently we add target dependencies while we are loading units. This
can create ordering loops even if configuration doesn't contain any
loop. Take for example following configuration,
$ systemctl get-default
multi-user.target
$ cat /etc/systemd/system/test.service
[Unit]
After=default.target
[Service]
ExecStart=/bin/true
[Install]
WantedBy=multi-user.target
If we encounter such unit file early during manager start-up (e.g. load
queue is dispatched while enumerating devices due to SYSTEMD_WANTS in
udev rules) we would add stub unit default.target and we order it Before
test.service. At the same time we add implicit Before to
multi-user.target. Later we merge two units and we create ordering cycle
in the process.
To fix the issue we will now never add any target dependencies until we
loaded all the unit files and resolved all the aliases.
This is similar to TAKE_PTR() but operates on file descriptors, and thus
assigns -1 to the fd parameter after returning it.
Removes 60 lines from our codebase. Pretty good too I think.
Let's better check this inside of the call than before it, so that we
never issue this while reloading, even should these calls be called due
to other reasons than just the unit notify.
This makes sure the reload state is unset a bit earlier in
manager_reload() so that we can safely call this function from there and
they do the right thing.
Follow-up for e63ebf71ed.
When running tests like test-unit-name, there is not point in setting
up the cgroup and signals and interacting with the environment. Similarly
when running fuzz testing of the parser.
Add new MANAGER_TEST_RUN_BASIC which takes the role of MANAGER_TEST_RUN_MINIMAL,
and redefine MANAGER_TEST_RUN_MINIMAL to just create the basic data structures.
Reproducer:
$ meson build && cd build
$ ninja
$ sudo useradd test
$ sudo su test
$ ./systemd --system --test
...
Failed to create /user.slice/user-1000.slice/session-6.scope/init.scope control group: Permission denied
Failed to allocate manager object: Permission denied
Above error message is caused by the fact that user test didn't have its
own session and we tried to set up init.scope already running as user
test in the directory owned by different user.
Let's skip setting up init.scope altogether since we won't be launching
processes anyway.
We maintain a queue of units and jobs that we are supposed to generate
change/new notifications for because they were either just created or
some of their property has changed. Let's throttle processing of this
queue a bit: as soon as > 1K of bus messages are queued for writing
let's skip processing the queue, and then recheck on the next
iteration again.
Moreover, never process more than 100 units in one go, return to the
event loop after that. Both limits together should put effective limits
on both space and time usage of the function, delaying further
operations until a later moment, when the queue is empty or the the
event loop is sufficiently idle again.
This should keep the number of generated messages much lower than
before on busy systems or where some client is hanging.
Note that this also means a bad client can slow down message dispatching
substantially for up to 90s if it likes to, for all clients. But that
should be acceptable as we only allow trusted bus clients, anyway.
Fixes: #8166
config_parse_join_controllers would free the destination argument on failure,
which is contrary to our normal style, where failed parsing has no effect.
Moving it to shared also allows a test to be added.
A .socket will reference a .service unit, by registering a UnitRef with the
.service unit. If this .service unit has the .socket unit listed in Wants or
Sockets or such, a cycle will be created. We would not free this cycle
properly, because we treated any unit with non-empty refs as uncollectable. To
solve this issue, treats refs with UnitRef in u->refs_by_target similarly to
the refs in u->dependencies, and check if the "other" unit is known to be
needed. If it is not needed, do not treat the reference from it as preventing
the unit we are looking at from being freed.
"check" is unclear: what is true, what is false? Let's rename to "can_gc" and
revert the return value ("positive" values are easier to grok).
v2:
- rename from unit_can_gc to unit_may_gc
I think if we log the error as being _ignored_, we should also consider
the event as handled and clear it. This was the behaviour prior to
575b300b (PR #7968).
I don't think we particularly wanted to change behaviour and keep retrying.
Sometimes that's useful, other times you cause more problems by filling the
logs.
Plus a nearby typo fix.
Previously, we'd synchronize bus names immediately when we succeeded
connecting to the bus, potentially even before coldplugging the units.
This was problematic, as synchronizing bus names meant invoking the
per-unit name change handler function which might change the unit's
state — which will result in consistency when done before we coldplug
things.
With this change we instead enqueue a job for the event loop to resync
the names in a later loop iteration, i.e. at a point where we know
coldplugging has finished.
Let's also use the journal if it is currently reloading. In that state
it should also be able to process our requests. Moreover, we might
otherwise end up disconnecting/reconnecting from the journal without
really any need to hence, relax the check accordingly.
This removes the current bus_init() call, as it had multiple problems:
it munged handling of the three bus connections we care about (private,
"api" and system) into one, even though the conditions when which was
ready are very different. It also added redundant logging, as the
individual calls it called all logged on their own anyway.
The three calls bus_init_api(), bus_init_private() and bus_init_system()
are now made public. A new call manager_dbus_is_running() is added that
works much like manager_journal_is_running() and is a lot more careful
when checking whether dbus is around. Optionally it checks the unit's
deserialized_state rather than state, in order to accomodate for cases
where we cant to connect to the bus before deserializing the
"subscribed" list, before coldplugging the units.
manager_recheck_dbus() is added, that works a lot like
manager_recheck_journal() and is invoked in unit_notify(), i.e. when
units change state.
All in all this should make handling a bit more alike to journal
handling, and it also fixes one major bug: when running in user mode
we'll now connect to the system bus early on, without conditionalizing
this in anyway.
Let's simplify things a bit: we so far called both functions every
single time, let's just merge one into the other, so that we have fewer
functions to call.
After discussions with @htejun it appears it's OK now to enable memory
accounting by default for all units without affecting system performance
too badly. facebook has made good experiences with deploying memory
accounting across their infrastructure.
This hence turns MemoryAccounting= from opt-in to opt-out, similar to
how TasksAccounting= is already handled. The other accounting options
remain off, their performance impact is too big still.
