"ratelimit" is a real word, so we don't need to use the other form anywhere.
We had both forms in various places, let's standarize on the shorter and more
correct one.
In high load scenarios it is possible for services to be started
before the NameOwnerChanged signal is properly installed.
Emulate a callback by also queuing a GetNameOwner when the match is
installed.
Fixes: #12956
This adds basic infrastructure to implement a "clean" operation for unit
types. This "clean" operation is supposed to remove on-disk resources of
units, and is supposed to be used in a later commit to clean our
RuntimeDirectory=, StateDirectory= and so on of service units.
Later commits will open this up to the bus, and hook up service units
with this.
This also adds a new generic ActiveState called UNIT_MAINTENANCE. It's
supposed to cover all kinds of "maintainance" state of units.
Specifically, this is supposed to cover the "cleaning" operations later
added for service units which might take a bit of time. This high-level,
generic, abstract state is called UNIT_MAINTENANCE instead of the
more specific "UNIT_CLEANING", since I think this should be kept open
for different operations possibly later on that could be nicely subsumed
under this (for example, maybe a recursive chown()ing operation could be
covered by this, and similar).
Takes a single /sys/fs/bpf/pinned_prog string as argument, but may be
specified multiple times. An empty assignment resets all previous filters.
Closes https://github.com/systemd/systemd/issues/10227
This was the last kind of accounting still not exposed on for each unit.
Let's fix that.
Note that this is a relatively simplistic approach: we don't expose
per-device stats, but sum them all up, much like cgtop does. This kind
of metric is probably the most interesting for most usecases, and covers
the "systemctl status" output best. If we want per-device stats one day
we can of course always add that eventually.
This adds a new per-service OOMPolicy= (along with a global
DefaultOOMPolicy=) that controls what to do if a process of the service
is killed by the kernel's OOM killer. It has three different values:
"continue" (old behaviour), "stop" (terminate the service), "kill" (let
the kernel kill all the service's processes).
On top of that, track OOM killer events per unit: generate a per-unit
structured, recognizable log message when we see an OOM killer event,
and put the service in a failure state if an OOM killer event was seen
and the selected policy was not "continue". A new "result" is defined
for this case: "oom-kill".
All of this relies on new cgroupv2 kernel functionality: the
"memory.events" notification interface and the "memory.oom.group"
attribute (which makes the kernel kill all cgroup processes
automatically).
Let's rename the .cgroup_inotify_wd field of the Unit object to
.cgroup_control_inotify_wd. Let's similarly rename the hashmap
.cgroup_inotify_wd_unit of the Manager object to
.cgroup_control_inotify_wd_unit.
Why? As preparation for a later commit that allows us to watch the
"memory.events" cgroup attribute file in addition to the "cgroup.events"
file we already watch with the fields above. In that later commit we'll
add new fields "cgroup_memory_inotify_wd" to Unit and
"cgroup_memory_inotify_wd_unit" to Manager, that are used to watch these
other events file.
No change in behaviour. Just some renaming.
Some PIDs can remain in the watched list even though their processes have
exited since a long time. It can easily happen if the main process of a forking
service manages to spawn a child before the control process exits for example.
However when a pid is about to be mapped to a unit by calling unit_watch_pid(),
the caller usually knows if the pid should belong to this unit exclusively: if
we just forked() off a child, then we can be sure that its PID is otherwise
unused. In this case we take this opportunity to remove any stalled PIDs from
the watched process list.
If we learnt about a PID in any other form (for example via PID file, via
searching, MAINPID= and so on), then we can't assume anything.
Just some renaming, no change in behaviour.
Background: I'd like to add more functions unit_test_xyz() that test
various things, hence let's streamline the naming a bit.
KillMode=mixed and control group are used to indicate that all
process should be killed off. SendSIGKILL is used for services
that require a clean shutdown. These are typically database
service where a SigKilled process would result in a lengthy
recovery and who's shutdown or startup time is quite variable
(so Timeout settings aren't of use).
Here we take these two factors and refuse to start a service if
there are existing processes within a control group. Databases,
while generally having some protection against multiple instances
running, lets not stress the rigor of these. Also ExecStartPre
parts of the service aren't as rigoriously written to protect
against against multiple use.
closes#8630
Nitpicky, but we've used a lot of random spacings and names in the past,
but we're trying to be completely consistent on "cgroup vN" now.
Generated by `fd -0 | xargs -0 -n1 sed -ri --follow-symlinks 's/cgroups? ?v?([0-9])/cgroup v\1/gI'`.
I manually ignored places where it's not appropriate to replace (eg.
"cgroup2" fstype and in src/shared/linux).
It would be very wrong if any of the specfier printf calls modified
any of the objects or data being printed. Let's mark all arguments as const
(primarily to make it easier for the reader to see where modifications cannot
occur).
This adds SuccessActionExitStatus= and FailureActionExitStatus= that may
be used to configure the exit status to propagate in when
SuccessAction=exit or FailureAction=exit is used.
When not specified let's also propagate the exit status of the main
process we fork off for the unit.
Previously we tried to be smart: when a new unit appeared and it only
added controllers to the cgroup mask we'd update the cached members mask
in all parents by ORing in the controller flags in their cached values.
Unfortunately this was quite broken, as we missed some conditions when
this cache had to be reset (for example, when a unit got unloaded),
moreover the optimization doesn't work when a controller is removed
anyway (as in that case there's no other way for the parent to iterate
though all children if any other, remaining child unit still needs it).
Hence, let's simplify the logic substantially: instead of updating the
cache on the right events (which we didn't get right), let's simply
invalidate the cache, and generate it lazily when we encounter it later.
This should actually result in better behaviour as we don't have to
calculate the new members mask for a whole subtree whever we have the
suspicion something changed, but can delay it to the point where we
actually need the members mask.
This allows us to simplify things quite a bit, which is good, since
validating this cache for correctness is hard enough.
Fixes: #9512
This call is only used by job.c and very specific to job handling.
Moreover the very similar logic of job_emit_status_message() is already
in job.c.
Hence, let's clean this up, and move both sets of functions to job.c,
and rename them a bit so that they express precisely what they do:
1. unit_status_emit_starting_stopping_reloading() →
job_emit_begin_status_message()
2. job_emit_status_message() → job_emit_done_status_message()
The first call is after all what we call when we begin with the
execution of a job, and the second call what we call when we are done
wiht it.
Just some moving and renaming, not other changes, and hence no change in
behaviour.
Behaviour is prett ymuch the same, but there's some additional type
checking done on the input parameters.
(In the case of UNIT_WRITE_FLAGS_NOOP() the C compiler won't actually do
the type checking necessarily, but static chckers at least could)
This splits the "environment" field of Manager into two:
transient_environment and client_environment. The former is generated
from configuration file, kernel cmdline, environment generators. The
latter is the one the user can control with "systemctl set-environment"
and similar.
Both sets are merged transparently whenever needed. Separating the two
sets has the benefit that we can safely flush out the former while
keeping the latter during daemon reload cycles, so that env var settings
from env generators or configuration files do not accumulate, but
dynamic API changes are kept around.
Note that this change is not entirely transparent to users: if the user
first uses "set-environment" to override a transient variable, and then
uses "unset-environment" to unset it again things will revert to the
original transient variable now, while previously the variable was fully
removed. This change in behaviour should not matter too much though I
figure.
Fixes: #9972
Let's be more careful with what we serialize: let's ensure we never
serialize strings that are longer than LONG_LINE_MAX, so that we know we
can read them back with read_line(…, LONG_LINE_MAX, …) safely.
In order to implement this all serialization functions are move to
serialize.[ch], and internally will do line size checks. We'd rather
skip a serialization line (with a loud warning) than write an overly
long line out. Of course, this is just a second level protection, after
all the data we serialize shouldn't be this long in the first place.
While we are at it also clean up logging: while serializing make sure to
always log about errors immediately. Also, (void)ify all calls we don't
expect errors in (or catch errors as part of the general
fflush_and_check() at the end.
This should be much better than fgets(), as we can read substantially
longer lines and overly long lines result in proper errors.
Fixes a vulnerability discovered by Jann Horn at Google.
CVE-2018-15686
LP: #1796402https://bugzilla.redhat.com/show_bug.cgi?id=1639071
Add LogRateLimitIntervalSec= and LogRateLimitBurst= options for
services. If provided, these values get passed to the journald
client context, and those values are used in the rate limiting
function in the journal over the the journald.conf values.
Part of #10230
Cgroup v2 provides the eBPF-based device controller, which isn't currently
supported by systemd. This commit aims to provide such support.
There are no user-visible changes, just the device policy and whitelist
start working if cgroup v2 is used.
Allows configuring the watchdog signal (with a default of SIGABRT).
This allows an alternative to SIGABRT when coredumps are not desirable.
Appropriate references to SIGABRT or aborting were renamed to reflect
more liberal watchdog signals.
Closes#8658
