Currently when both ipv4ll and dhcp are enabled, ipv4ll
address (if one has been claimed) is removed when dhcp
address is aquired. This is not the best thing to do
since there might be clients unaware of the removal
trying to communicate.
This patch provides a smooth transition between ipv4ll
and dhcp. If ipv4ll address was claimed [1] before dhcp,
address is marked as deprecated. Deprecated address is still
a valid address and packets can be received on it but address
cannot be selected as a source address. If dhcp lease cannot
be extended, then ipv4ll address is marked as valid again.
[1] If there is no collision, claiming IPv4LL takes between 4 to
7 seconds.
Use a static table with all the typing information, rather than repeated
switch statements. This should make it a lot simpler to add new types.
We need to keep all the type info to be able to create containers
without exposing their implementation details to the users of the library.
As a freebee we verify the types of appended/read attributes.
The API is extended to nicely deal with unions of container types.
The object is not currently used, so just drop the refenence. If/when we end up
using the object in the future, we must make sure to deal with possible mutual
references between rtnl busses and their queued messages; as is done in sd-bus.
Added support for tunneling netlink attrributes (ipip, gre, sit).
These works with kernel module ipip, gre and sit . The test cases are
moved to a separate file and manual test as well because they require
respective kernel modules as well.
Extend rta_offset_tb into a stack of offset tables, one for each parent of the
current container, and make sd_rtnl_message_{enter,exit}_container() pop/push
to this stack.
Also make sd_rtnl_message_rewind() parse the top-level container, and use this
when reading a message from the socket.
This changes the API by dropping the now redundant sd_rtnl_message_read()
method.
safe_close_pair() is more like safe_close(), except that it handles
pairs of fds, and doesn't make and misleading allusion, as it works
similarly well for socketpairs() as for pipe()s...
If you allocate a message with bus==NULL and then unref the main bus,
it will free your message underneath and your program will go boom!
To fix that, we really need to figure out what the semantics for
self-references (m->bus) should be and when/where/what accesses are
actually allowed.
Same is true for the pseudo-thread-safety we employ..
In sd_bus_unref() we check for self-reference loops and destruct our
queues in case we're the only reference holders. However, we do _not_
modify our own ref-count, thus effectively causing the
message-destructions to enter with the same reference count as we did.
The only reason this doesn't cause an endless recursion (or trigger
assert(m->n_ref > 0) in sd_bus_message_unref()) is the fact that we
decrease queue-counters _before_ calling _unref(). That's not obvious at
all, so add a big fat note in bus_reset_queues() to everyone touching that
code.
Like sd-bus, sd-rtnl can have self-references through queued messages. In
particular, each queued message has the following self-ref loop:
rtnl->wqueue[i]->rtnl == rtnl
Same is true for "rqueue".
When sd_rtnl_unref() gets called, we must therefore make sure we correctly
consider each self-reference when deciding to destroy the object. For each
queued message, there _might_ be one ref. However, rtnl-messages can be
created _without_ a bus-reference, therefore we need to verify the
actually required ref-count.
Once we know exactly how many self-refs exist, and we verified none of the
queued messages has external references, we can destruct the object.
We must immediately drop our own reference, then flush all queues and
destroy the bus object. Otherwise, each sd_rtnl_message_unref() call would
recurse into the same destruction logic as they enter with the same
rtnl-refcnt.
Note: We really should verify _all_ queued messages have m->rtnl set to
the bus they're queued on. If that's given, we can change:
if (REFCNT_GET(rtnl->n_ref) <= refs)
to
if (REFCNT_GET(rtnl->n_ref) == refs)
and thus avoid recalculating the required refs for each message we
remove from the queue during destruction.
Add a new config 'Activating' directive which denotes whether a busname
is actually registered on the bus. It defaults to 'yes'.
If set to 'no', the .busname unit only uploads policy, which will remain
active as long as the unit is running.
This makes sure we don't mishandle if developers specificy a different
AcceptFileDescriptors= setting in .busname units then they set for the
bus connection in the activated program.
AcceptFD= defaults to true, thus making sure that by default fd passing
is enabled for all activatable names. Since for normal bus connections
fd passing is enabled too by default this makes sure fd passing works
correctly regardless whether a service is already activated or not.
Making this configurable on both busname units and in bus connections is
messy, but unavoidable since busnames are established and may queue
messages before the connection feature negotiation is done by the
service eventually activated. Conversely, feature negotiation on bus
connections takes place before the connection acquires its names.
Of course, this means developers really should make sure to keep the
settings in .busname units in sync with what they later intend to
negotiate.
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
After all, it is ultimately linked to libsystems.so anyway, thus belongs
there and shares very little with the rest of logind, hence let's move
this away.
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
This broke hashtable lookups for the message cookies on s390x, which is
a 64bit BE machine where accessing 32bit values as 64bit and vice versa
will explode.
Also, while we are at it, be a bit more careful when dealing with the
64bit cookies we expose and the 32bit serial numbers dbus uses in its
payload.
Problem identified by Fridrich Strba.
The new calls work similarly, but enforce a that a common, fixed bus
path prefix is used.
This follows discussions with Simon McVittie on IRC that it should be a
good idea to make sure that people don't use the escaping applied here
too wildly as anything other than the last label of a bus path.
Activator connections may upload policy when registering to the bus.
This patch contains code to translate between BusNamePolicy objects and
the kdbus specific items.
Bring kdbus.h in sync with recent policy related changes. Most notably,
KDBUS_MAKE_POLICY_OPEN is now gone. The rest doesn't matter for systemd
at this point, as the policy functionality was not yet used.
This patch introduces reading ethernet address and IPV4/IPv6
as well which is based on table based look up.
[tomegun: rename read_ether() to read_ether_addr() to match the append function.]
This patch introduces new netlink attribute parsing logic
which is table based lookup and sd_rtnl_message_read_*
methods for reading attributes. By doing this user does not
have to loop for the attribute values . Only providing the
attribute type it gets the attribute values which is optimized
and sd_rtnl_message_read_* methods are simplified.
The code for parsing these properties is shared with "systemctl
set-property", which means all the resource control settings are
immediately available.
Implements IPv4LL with respect to RFC 3927
(http://tools.ietf.org/rfc/rfc3927.txt) and integrates it
with networkd. Majority of the IPv4LL state machine is
taken from avahi (http://avahi.org/) project's autoip.
IPv4LL can be enabled by IPv4LL=yes under [Network]
section of .network file.
IPv4LL works independent of DHCP but if DHCP lease is
aquired, then LL address will be dropped.
[tomegun: removed a trailing newline and a compiler warning]
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
This partially reverts 41a55c46ab
Some specifications we want to stay compatibility actually document
/var/run, not /run, and we should stay compatible with that. In order to
make sure our D-Bus implementation works on any system, regardless if
running systemd or not, we should always use /var/run which is the
only path mandated by the D-Bus spec.
Similar, glibc hardcodes the utmp location to /var/run, and this is
exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this
public API, too.
We simply do not support systems where /var/run is not a symlink → /run.
Hence both are equivalent. Staying compatible with upstream
specifications hence weighs more than cleaning up superficial
appearance.
../src/shared/unit-name.c:462: error: undefined reference to 'sd_bus_label_escape'
../src/shared/unit-name.c:477: error: undefined reference to 'sd_bus_label_unescape'
collect2: error: ld returned 1 exit status
This new event source is triggered by the dispatching of any non-post
event source. It can thus be used to do clean-up or recheck work,
triggered by any other event source having been executed.
This is different from "defer" event source which are unconditionally
triggered as long as they are enabled. A "defer" event source that does
nothing will result in the event loop busy looping unless it is turned
off eventually. This is different for "post" event sources that will be
only triggered when some other non-post ran, and will thus not keep the
event loop busy on its own.
There was a copy-paste error introduced in commit c2ba3ad660
which causes the following error when using timer units:
Assertion '(x->type == SOURCE_MONOTONIC && y->type == SOURCE_MONOTONIC) || (x->type == SOURCE_REALTIME && y->type == SOURCE_REALTIME)'
failed at src/libsystemd/sd-event/sd-event.c:264, function latest_time_prioq_compare(). Aborting.
gcc (4.8.2, arm) doesn't understand that vtable_property_get_userdata()
will always set 'u' when it returns > 0. Hence, the warning is bogus,
but anyway.
src/libsystemd/sd-bus/bus-objects.c:510:19: warning: 'u' may be used uninitialized in this function [-Wmaybe-uninitialized]
(and yes, indeed, even the reported line numbers are bogus in this case)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
Setting a child-source state to anything but SD_EVENT_OFF currently does
nothing. The condition logic is flawed. Move the state update *below* the
test for the previous state.
Fixes a crash if you call:
sd_event_source_set_enabled(source, SD_EVENT_ON);
sd_event_source_unref(source);
on a child-source in its own callback.
The kernel will then look up the ifindex itself based on the name.
This should be used very carefully as it is racey.
[This was a left-over hunk from my previous nspawn patch.]
So far we followed the rule to always indicate the "flavour" of
constructors after the "_new_" or "_open_" in the function name, so
let's keep things in sync here for rtnl and do the same.
The "sd_" prefix is supposed to be used on exported symbols only, and
not in the middle of names. Let's drop it from the cleanup macros hence,
to make things simpler.
The bus cleanup macros don't carry the "sd_" either, so this brings the
APIs a bit nearer.
Added sd_rtnl_message_append_u8 and
few attribute support in sd_rtnl_message_append_u32
IFLA_GROUP, IFLA_TXQLEN, IFLA_NUM_TX_QUEUES, IFLA_NUM_RX_QUEUES
In trying to track down a stupid linker bug, I noticed a bunch of
memset() calls that should be using memzero() to make it more "obvious"
that the options are correct (i.e. 0 is not the length, but the data to
set). So fix up all current calls to memset(foo, 0, length) to
memzero(foo, length).
sizes and numbers of hash functions
In order to make the bloom filter logic more future proof communicate
bloom filter parameters from the original bus creator to the clients,
and allow them to be variable within certain ranges.
Add new calls sd_bus_open() and sd_bus_default() for connecting to the
starter bus a service was invoked for, or -- if the process is not a
bus-activated service -- the appropriate bus for the scope the process
has been started in.
A compatibility libsystemd-login library is created which uses
.symver and ifunc magic proposed by Lennart to make programs linked
to the old library name continue to work seamlessly.
Unfortunately the bfd linker crashes:
https://sourceware.org/bugzilla/show_bug.cgi?id=16467
This will be fixed in binutils 2.25.
As a work-around, gold can be used:
LDFLAGS=-Wl,-fuse-ld=gold
Unfortunately the switch to pick the linker appeared in gcc 4.8.
This also doesn't work with LLVM:
http://llvm.org/bugs/show_bug.cgi?id=11897
This brings the calls into similar style as the respective functions in
libsystemd-journal, and also is a bi shorter and more descriptive since
it clarifies the time unit used.
Make them more simiar to sd_bus and friends. Also factor out the event attachment. In the future,
we will likely want to support external main-loops, so this is a first step. For the time being,
we are still requiring an sd_event to be attached though.
The kdbus prioq logic will use 64bit prios too, so let's keep this
similar in style. Using 64bit here has the advantage, that pointers and
pretty much anything else can be mapped naturally to priorities if so
desired.
