This adds SuccessActionExitStatus= and FailureActionExitStatus= that may
be used to configure the exit status to propagate in when
SuccessAction=exit or FailureAction=exit is used.
When not specified let's also propagate the exit status of the main
process we fork off for the unit.
Ideally, coccinelle would strip unnecessary braces too. But I do not see any
option in coccinelle for this, so instead, I edited the patch text using
search&replace to remove the braces. Unfortunately this is not fully automatic,
in particular it didn't deal well with if-else-if-else blocks and ifdefs, so
there is an increased likelikehood be some bugs in such spots.
I also removed part of the patch that coccinelle generated for udev, where we
returns -1 for failure. This should be fixed independently.
Ideally we'd even propagate this all the way to the client, by having a
separate JobType enum value for this. But it's hard to add this without
breaking compat, hence for now let's at least internally propagate this
case differently from the case "already on it".
This is then used to call job_finish_and_invalidate() slightly
differently, with the already= parameter false, as in the failed
condition case no message was likely produced so far.
This call is only used by job.c and very specific to job handling.
Moreover the very similar logic of job_emit_status_message() is already
in job.c.
Hence, let's clean this up, and move both sets of functions to job.c,
and rename them a bit so that they express precisely what they do:
1. unit_status_emit_starting_stopping_reloading() →
job_emit_begin_status_message()
2. job_emit_status_message() → job_emit_done_status_message()
The first call is after all what we call when we begin with the
execution of a job, and the second call what we call when we are done
wiht it.
Just some moving and renaming, not other changes, and hence no change in
behaviour.
Let's be more careful with what we serialize: let's ensure we never
serialize strings that are longer than LONG_LINE_MAX, so that we know we
can read them back with read_line(…, LONG_LINE_MAX, …) safely.
In order to implement this all serialization functions are move to
serialize.[ch], and internally will do line size checks. We'd rather
skip a serialization line (with a loud warning) than write an overly
long line out. Of course, this is just a second level protection, after
all the data we serialize shouldn't be this long in the first place.
While we are at it also clean up logging: while serializing make sure to
always log about errors immediately. Also, (void)ify all calls we don't
expect errors in (or catch errors as part of the general
fflush_and_check() at the end.
This should be much better than fgets(), as we can read substantially
longer lines and overly long lines result in proper errors.
Fixes a vulnerability discovered by Jann Horn at Google.
CVE-2018-15686
LP: #1796402https://bugzilla.redhat.com/show_bug.cgi?id=1639071
For example in a container we'd log:
Oct 17 17:01:10 rawhide systemd[1]: Started Power-Off.
Oct 17 17:01:10 rawhide systemd[1]: Forcibly powering off: unit succeeded
Oct 17 17:01:10 rawhide systemd[1]: Reached target Power-Off.
Oct 17 17:01:10 rawhide systemd[1]: Shutting down.
and on the console we'd write (in red)
[ !! ] Forcibly powering off: unit succeeded
This is not useful in any way, and the fact that we're calling an "emergency action"
is an internal implementation detail. Let's log about c-a-d and the watchdog actions
only.
The setting is now only looked at when considering an action for a job timeout
or unit start limit. It is ignored for ctrl-alt-del, SuccessAction, SuccessFailure.
v2: turn the parameter into a flag field
v3: rename Options to Flags
Using an assertion is fine, since calls to job_merge_into_installed()
are protected by a check for job_type_is_conflicting().
Uncovered by Coverity, fixes CID 996307.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
When "systemctl daemon-reload" is run at the same time as "systemctl
start foo", the latter might hang. That's because commands like start
wait for JobRemoved signal to know when the job is finished. But if the
job is finished during reloading, the signal is never sent.
The hang can be easily reproduced by running
# for ((N=1; N>0; N++)) ; do echo $N ; systemctl daemon-reload ; done
# for ((N=1; N>0; N++)) ; do echo $N ; systemctl start systemd-coredump.socket ; done
in two different terminals. The start command will hang after 1-2
iterations.
This keeps track of jobs that were started before reload and finished
during it and sends JobRemoved after the reload has finished.
Scope units are populated from PIDs specified by the bus client. We do
that when a scope is started. We really shouldn't allow scopes to be
started multiple times, as the PIDs then might be heavily out of date.
Moreover, clients should have the guarantee that any scope they allocate
has a clear runtime cycle which is not repetitive.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
The comment above says we're truncating the string but that's not true,
an assert will fail in xsprintf if the description is longer than
LINE_MAX.
Let's use snprintf instead of xsprintf to make sure it's truncated.
We'll cast its result to void to tell static checkers we're fine with
truncation.
Let's fork off sync() ina process instead of a thread, as a safety
measure. This is beneficial to ensure that the original process can exit
without having to wait for the sync() to finish (note that the kernel
will delay process termination until all threads finished their
syscalls). In case of hanging NFS this increases the chance that PID 1
can safely transition to the "systemd-shutdown" process as the sync() is
initiated early on but definitely not waited for.
This replaces the dependencies Set* objects by Hashmap* objects, where
the key is the depending Unit, and the value is a bitmask encoding why
the specific dependency was created.
The bitmask contains a number of different, defined bits, that indicate
why dependencies exist, for example whether they are created due to
explicitly configured deps in files, by udev rules or implicitly.
Note that memory usage is not increased by this change, even though we
store more information, as we manage to encode the bit mask inside the
value pointer each Hashmap entry contains.
Why this all? When we know how a dependency came to be, we can update
dependencies correctly when a configuration source changes but others
are left unaltered. Specifically:
1. We can fix UDEV_WANTS dependency generation: so far we kept adding
dependencies configured that way, but if a device lost such a
dependency we couldn't them again as there was no scheme for removing
of dependencies in place.
2. We can implement "pin-pointed" reload of unit files. If we know what
dependencies were created as result of configuration in a unit file,
then we know what to flush out when we want to reload it.
3. It's useful for debugging: "systemd-analyze dump" now shows
this information, helping substantially with understanding how
systemd's dependency tree came to be the way it came to be.
job_finish_and_invalidate() calls job_free() to destroy jobs (and remove
them from the dbus queue). So we don't need to add them to the dbus queue
first.
We only want to add jobs to the dbus queue if they're a restart job, which
we're transmogrifying into a start job and putting back into the system.
So, currently, some of the structured log messages we generated based on
jobs carry the result in RESULT=, and others in JOB_RESULT=. Let's
streamline this, as stick to JOB_RESULT= in one place.
This is kind of an API break, but given that currently most software has
to check both fields anyway, I think we can get away with it.
Why unify on JOB_RESULT= rather than RESULT=? Well, we manage different
types of result codes in systemd. Most importanlty besides job results
there are also service results, and we should be explicit in what we
mean here.
This is just a cosmetic issue.
Garbage collection of jobs (especially the ones that we create automatically)
is something of an internal implementation detail and should not be made
visible to the users. But it's probably still useful to log this in the
journal, so the code is rearranged to skip one of the messages if we log to the
console and the journal separately, and to keep the message if we log
everything to the console.
Fixes#6254.
