Functions that accept no arguments should be
explicitly declared a void parameter in their parameter list.
Signed-off-by: Marco Wang <m.aesophor@gmail.com>
The machine-id is used to create a few directories and setup a default
loader entry in loader.conf. Having bootctl create the directories
itself is not particularly useful as it does not put anything in them
and bootctl install is not guaranteed to be called before an initramfs
tool like kernel-install so other programs will always need to have
logic to create the directories themselves if they happen to be called
before bootctl install is called.
On top of this, when using unified kernel images, these are installed to
$BOOT/EFI/Linux which removes the need to have the directories created
by bootctl at all. This further indicates that these directories should
be created by the program that puts something in them rather than by
bootctl.
Removing the machine-id dependency allows bootctl install to be called
even when there's no machine-id in the image. This is useful for image
builders such as mkosi which don't have a machine-id when
installing systemd-boot (via bootctl) because it should only be
generated by systemd when the final image is booted.
The default entry in loader.conf based on the machine-id in loader.conf
is also removed which shouldn't be a massive loss in usability overall.
This commit reverts commit 341890d.
The key macros added in commit 6fe95d3020 look strange at first sight.
Add a comment with just the tablet name after each line, so that it's
obvious that these lines address device-specific issues of the EFI
firmware, and not broken/old code.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
When a key is pressed, the EFI firmware gives us a 64-bit word that
contains the modifier key code in the upper 32 bits, the scan code in
the middle 16 bits, and a unicode character in the low 16 bits.
Some bogus EFI firmwares will put the unicode character in the scan code
area, for instance on the EZpad mini 4s tablet.
Others will even put the unicode character in both the scan code and
unicode areas. This is the case for instance on the Teclast X98+ II
tablet.
Add workarounds for these corner cases, only for the carriage return key
right now. Some more workarounds may be needed, e.g. for volume keys,
but I cannot test it.
Partially fixes#8466.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
ARM toolchains will sometimes optimize otherwise floating-point-free
code with floating point and SIMD instructions. This was happening with
systemd-bootarm.efi and it was causing U-Boot to crash and reset the
CPU. U-Boot does not support the ARM VFP floating point coprocessor,
which is an optional piece of hardware anyway [1].
Ensure the compiler does not generate FP/SIMD instructions by supplying
the `-mgeneral-regs-only` option when building for ARM [2].
The other option you often see to solve these problems is
`-msoft-float`, but that changes the ABI and prevents linking with
libgnuefi.
[1] https://lists.denx.de/pipermail/u-boot/2011-February/087736.html
[2] https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html#index-mgeneral-regs-only-1
Fixes systemd build in Fedora rawhide.
The old ldsdir option is not useful, because both the directory and the
file name changed. Let's remove the option and try to autodetect the file
name. If this turns out to be not enough, a new option to simply specify
the full path to the file can be added.
F31:
efi arch: x86_64
EFI machine type: x64
EFI CC ccache cc
EFI lds: /usr/lib64/gnuefi/elf_x64_efi.lds
EFI crt0: /usr/lib64/gnuefi/crt0-efi-x64.o
EFI include directory: /usr/include/efi
F32:
efi arch: x86_64
EFI machine type: x64
EFI CC ccache cc
EFI lds: /usr/lib/gnuefi/x64/efi.lds
EFI crt0: /usr/lib/gnuefi/x64/crt0.o
EFI include directory: /usr/include/efi
```
ninja -C build
ninja: Entering directory `build'
[29/101] Generating systemd_boot.so with a custom command.
FAILED: src/boot/efi/systemd_boot.so
/usr/bin/ld -o src/boot/efi/systemd_boot.so -T /usr/lib64/gnuefi/elf_x64_efi.lds -shared -Bsymbolic -nostdlib -znocombreloc -L /usr/lib64 /usr/lib64/gnuefi/crt0-efi-x64.o src/boot/efi/disk.c.o src/boot/efi/graphics.c.o src/boot/efi/measure.c.o src/boot/efi/pe.c.o src/boot/efi/util.c.o src/boot/efi/boot.c.o src/boot/efi/console.c.o src/boot/efi/crc32.c.o src/boot/efi/random-seed.c.o src/boot/efi/sha256.c.o src/boot/efi/shim.c.o -lefi -lgnuefi /usr/lib/gcc/x86_64-redhat-linux/10/libgcc.a
/usr/bin/ld: src/boot/efi/graphics.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
/usr/bin/ld: src/boot/efi/pe.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
/usr/bin/ld: src/boot/efi/util.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
/usr/bin/ld: src/boot/efi/boot.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
/usr/bin/ld: src/boot/efi/console.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
/usr/bin/ld: src/boot/efi/random-seed.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
/usr/bin/ld: src/boot/efi/shim.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: multiple definition of `loader_guid'; src/boot/efi/disk.c.o:/home/sus/tt/systemd/build/../src/boot/efi/util.h:58: first defined here
[31/101] Generating stub.c.o with a custom command.
ninja: build stopped: subcommand failed.
make: *** [Makefile:2: all] Error 1
```
If there is no boot menu timeout, pressing a key during boot should get
the boot menu displayed. However, on some systems the keyboard is not
initialized right away, which causes the menu to be inaccessible if no
timeout is specified.
To resolve this, if the error is "not ready" after the initial attempt of
detection, wait for 0.1 second and retry. This solves the problem
described above on all the tested systems.
The reason for just a single retry, and not retrying while "not ready",
is that some firmwares continue to return the "not ready" error on
every probe attempt if no key is pressed.
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Apparently some firmwares don't allow us to write this token, and refuse
it with EINVAL. We should normally consider that a fatal error, but not
really in the case of "bootctl random-seed" when called from the
systemd-boot-system-token.service since it's called as "best effort"
service after boot on various systems, and hence we shouldn't fail
loudly.
Similar, when we cannot find the ESP don't fail either, since there are
systems (arch install ISOs) that carry a boot loader capable of the
random seed logic but don't mount it after boot.
Fixes: #13603
Make two minor cosmetic changes to how config_entry_add_linux() extracts
OS information from the embedded /etc/os-release in EFISTUB binaries.
This increases the detail of information available to the user for
EFISTUB entries.
* entry->version, which was previously always null, is now set to the
value of VERSION, or VERSION_ID, or BUILD_ID (preferred in that order).
* entry->title, which was previously set to the value of PRETTY_NAME, can
now fall back to NAME or ID if PRETTY_NAME is not present. In that case,
NAME is preferred over ID.
Change config_entry_add_from_file() so that it does not remove the
`.conf` ending from the filename that it uses for entry->id. This is
necessary because otherwise an EFISTUB binary and a loader config entry
might end up with the same ID, as the loader config IDs previously
didn't include the config filename's .conf extension (see boot.c:1435).
Consider, for instance, an EFISTUB /EFI/Linux/linux.efi and a loader
config /loader/entries/linux.efi.conf; both would have the ID linux.efi.
In addition, update a comment that previously stated that IDs are
non-unique (which is no longer the case, as of this commit).
Change config_entry_add_linux() so that Linux EFISTUB entries' ids are
simply the binaries' filenames, as is already the case with loader
configs. This guarantees that EFISTUB binaries' IDs are mutually unique.
This makes the naming more consistent: we now have
bootctl systemd-efi-options,
$SYSTEMD_EFI_OPTIONS
and the SystemdOptions EFI variable.
(SystemdEFIOptions would be redundant, because it is only used in the context
of efivars, and users don't interact with that name directly.)
bootctl is adjusted to use 2sp indentation, similarly to systemctl and other
programs.
Remove the prefix with the old name from 'bootctl systemd-efi-options' output,
since it's redundant and we don't want the old name anyway.
This cleans up and unifies the outut of --help texts a bit:
1. Highlight the human friendly description string, not the command
line via ANSI sequences. Previously both this description string and
the brief command line summary was marked with the same ANSI
highlight sequence, but given we auto-page to less and less does not
honour multi-line highlights only the command line summary was
affectively highlighted. Rationale: for highlighting the description
instead of the command line: the command line summary is relatively
boring, and mostly the same for out tools, the description on the
other hand is pregnant, important and captions the whole thing and
hence deserves highlighting.
2. Always suffix "Options" with ":" in the help text
3. Rename "Flags" → "Options" in one case
4. Move commands to the top in a few cases
5. add coloring to many more help pages
6. Unify on COMMAND instead of {COMMAND} in the command line summary.
Some tools did it one way, others the other way. I am not sure what
precisely {} is supposed to mean, that uppercasing doesn't, hence
let's simplify and stick to the {}-less syntax
And minor other tweaks.
Marco Wang