There isn't much difference, but in general we prefer to use the standard
functions. glibc provides reallocarray since version 2.26.
I moved explicit_bzero is configure test to the bottom, so that the two stdlib
functions are at the bottom.
gcc warns about unitialized memory access because it notices that ssize_t which
is < 0 could be cast to positive int value. We know that this can't really
happen because only -1 can be returned, but OTOH, in principle a large
*positive* value cannot be cast properly. This is unlikely too, since xattrs
cannot be too large, but it seems cleaner to just use a size_t to return the
value and avoid the cast altoghter. This makes the code simpler and gcc is
happy too.
The following warning goes away:
[113/1502] Compiling C object 'src/basic/basic@sta/xattr-util.c.o'.
In file included from ../src/basic/alloc-util.h:28:0,
from ../src/basic/xattr-util.c:30:
../src/basic/xattr-util.c: In function ‘fd_getcrtime_at’:
../src/basic/macro.h:207:60: warning: ‘b’ may be used uninitialized in this function [-Wmaybe-uninitialized]
UNIQ_T(A,aq) < UNIQ_T(B,bq) ? UNIQ_T(A,aq) : UNIQ_T(B,bq); \
^
../src/basic/xattr-util.c:155:19: note: ‘b’ was declared here
usec_t a, b;
^
$ sudo systemd-run -p RootDirectory=/usr -E LD_LIBRARY_PATH=/lib/systemd/ -E SYSTEMD_LOG_LEVEL=debug /bin/systemd-detect-virt
Before
systemd-detect-virt[18498]: No virtualization found in DMI
systemd-detect-virt[18498]: No virtualization found in CPUID
systemd-detect-virt[18498]: Virtualization XEN not found, /proc/xen does not exist
systemd-detect-virt[18498]: This platform does not support /proc/device-tree
systemd-detect-virt[18498]: Failed to check for virtualization: No such file or directory
The first four lines are at debug level, so the user would only see that last
one usually, which is not very enlightening.
This now becomes:
systemd-detect-virt[21172]: No virtualization found in DMI
systemd-detect-virt[21172]: No virtualization found in CPUID
systemd-detect-virt[21172]: Virtualization XEN not found, /proc/xen does not exist
systemd-detect-virt[21172]: This platform does not support /proc/device-tree
systemd-detect-virt[21172]: /proc/cpuinfo not found, assuming no UML virtualization.
systemd-detect-virt[21172]: This platform does not support /proc/sysinfo
systemd-detect-virt[21172]: Found VM virtualization none
systemd-detect-virt[21172]: none
We do more checks, which is good too.
Then it can be used in the asserts in logging functions without causing
infinite recursion. The error is just printed to stderr, it should be
good enough for the common case.
gcc-8 throws an error if it knows snprintf might truncate output and the
return value is ignored:
../src/udev/udev-builtin-net_id.c: In function 'dev_pci_slot':
../src/udev/udev-builtin-net_id.c:297:47: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
snprintf(str, sizeof str, "%s/%s/address", slots, dent->d_name);
^~
../src/udev/udev-builtin-net_id.c:297:17: note: 'snprintf' output between 10 and 4360 bytes into a destination of size 4096
snprintf(str, sizeof str, "%s/%s/address", slots, dent->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
Let's check all return values. This actually makes the code better, because there's
no point in trying to open a file when the name has been truncated, etc.
If log_do_header() was called with overly long parameters, it'd generate
improper output. Essentially, it'd be truncated at random point, in particular
missing a newline at the end, so it'd run with the next field, usually MESSAGE=.
log_do_header is called with parameters from compiled code (file name, lien
nubmer, etc), so in practice this was unlikely to ever be a problem, but it is
possible. In particular, if systemd was compiled from sources in some deeply
nested directory (which happens for example in mock and other build roots), the
filename could be very long.
As a safety measure, let's truncate all parameters to 256 bytes. So we have
5 fields which are 256 bytes (plus the field name prefix), and a few other
fields with fixed width. This must always fit in the 2048 byte buffer.
I don't think there's much gain in calculating the required length precisely,
since it's a lot of fields and a few bytes allocated on the stack don't matter.
log_dispatch_internal has only one caller where the extra_field/extra
params are not null: log_unit_full. When log_unit_full() was called,
when we got to log_dispatch_internal, our header would look like this:
PRIORITY=7
SYSLOG_FACILITY=3
CODE_FILE=../src/core/manager.c
CODE_LINE=2145
CODE_FUNC=manager_invoke_sigchld_event
USER_UNIT=gnome-terminal-server.service
65dffa7a3b984a6d9a46f0b8fb57710bUSER_INVOCATION_ID=
SYSLOG_IDENTIFIER=systemd
It took me a while to understand why I'm not seeing mangled messages in the
journal (after all, "" is a valid rvalue for log messages). The answer is that
journald rejects any field name which starts with a digit, and the MESSAGE_ID
that was used here starts with a digit. Hence, those lines would be silently
filtered out.
If a touchpad has MT axes only but not ABS_X/ABS_Y (DualShock 4 controller),
then we hit both the conditions is_touchpad and the later check for
!has_abs_axes here, assigning is_mouse and ID_INPUT_MOUSE later.
This is a bug, we historically only assigned either of of the pointing device
tags ID_INPUT_MOUSE/TOUCHPAD/JOYSTICK/TOUCHSCREEN, never multiple of them.
Note that we cannot just check for has_abs_axes and has_mt_coordinates because
the apple touch mouse has both. We really need to check if the device has
already been assigned something else.
https://bugs.freedesktop.org/show_bug.cgi?id=105050
> logind sessions are mostly bound to the audit session concept, and audit
> sessions remain unaffected by "su", in fact they are defined to be
> "sealed off", i.e. in a way that if a process entered a session once, it
> will always stay with it, and so will its children, i.e. the only way to
> get a new session is by forking off something off PID 1 (or something
> similar) that never has been part of a session.
The code had a gap. user@.service is a special case PAM session which does
not create a logind session. Let's remember to check for it.
Fixes#8021
This patch adds safe_atoux16 for parsing an unsigned hexadecimal 16bit int, and
uses that for parsing USB device and vendor IDs.
This fixes a compile error with gcc-8 because while we know that USB IDs are 2 bytes,
the compiler does not know that.
../src/udev/udev-builtin-hwdb.c:80:38: error: '%04X' directive output may be
truncated writing between 4 and 8 bytes into a region of size between 2 and 6
[-Werror=format-truncation=]
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Patrick Uiterwijk <puiterwijk@redhat.com>
Commit f11cba7479 ("libsystemd-network: fix unaligned loads (issue #7654)")
changed the way in which the MAC address is read to use native endiannes:
htobe32(*((uint32_t *)x) -> unaligned_read_ne32(x)
This is wrong because loads done with BPF_LD + BPF_ABS are big-endian, as it
can be seen for the ethertype and arp-operation loads above in the
filter. Also, the same commit changed:
htobe32(*((unsigned int *)x) -> unaligned_read_be32(x)
in _bind_raw_socket(), which is the correct form.
The commit broke IPv4LL in presence of loops, as the sender now considers its
own packets as conflicting.
Fixes: f11cba7479
NAME is kind of meaningless, because everything has a name. "Unit"
makes it more obvious that a name of a unit is necessary. I was always
momentarily baffled by "set-property NAME ASSIGNMENT...", where there
are two objects (the unit and the property), and it's not clear which of
the two "NAME" is supposed to signify.
This is an attempt to improve #8228 a bit, by extending the /run/nologin
a bit, but still keeping it somewhat brief.
On purpose I used the vague wording "unprivileged user" rather than
"non-root user" so that pam_nologin can be updated to disable its
behaviour for members of the "wheel" group one day, and our messages
would still make sense.
See #8228.
This partially reverts 3536f49e8f and
3536f49e8f.
When the user is dynamic, and we are setting up state, cache, or logs dirs,
behaviour is unchanged, we always do a recursive chown. This is necessary
because the user number might change between invocations.
But when setting up a directory for non-dynamic user, or a runtime directory
for a dynamic user, do any ownership or mode changes only when the directory
is initially created. Nothing says that the files under those directories have
to be all recursively owned by our user. This restores behaviour before
3536f49e8f, so modifications to the state of
the runtime directory persist between ExecStartPre's and ExecStart's, and even
longer in case the directory is persistent.
I think it _would_ be a nice property if setting a user would automatically
propagate to ownership of any Runtime/Logs/Cache directories. But this is
incompatible with another nice property, namely preserving changes to those
directories made by an admin, and with allowing change of ownership of files
in those directories by the service (e.g. to allow other users to access them).
Of the two, I think the second property is more important. Also, it's backwards
compatible.
https://bugzilla.redhat.com/show_bug.cgi?id=1508495
There is no need to chmod a directory we just created, so move that step
up into a branch. After that, 'effective' is only used once, so get rid of
it too.
Generally we prefer 'return' from main() over exit() so that automatic
cleanups and such work correct. Let's do that in shutdown.c too, becuase
there's not really any reason not to.
With this we are pretty good in consistently using return from main()
rather than exit() all across the codebase. Yay!
So far, we had two implementations of reboot-with-parameter doing pretty
much the same. Let's unify that in a generic implementation used by
both.
This is particulary nice as it unifies all /run/systemd/reboot-param
handling in a single .c file.
This is primarily preparation for a follow-up commit that adds a common
implementation of the other side of the reboot parameter file, i.e. the
code that reads the file and issues reboot() for it.
This mimics the raw_clone() call we have in place already and
establishes a new syscall wrapper raw_reboot() that wraps the kernel's
reboot() system call in a bit more low-level fashion that glibc's
reboot() wrapper. The main difference is that the extra "arg" argument
is supported.
Ultimately this just replaces the syscall wrapper implementation we
currently have at three places in our codebase by a single one.
With this change this means that all our syscall() invocations are
neatly separated out in static inline system call wrappers in our header
functions.
In a number of occasions we use FORK_CLOSE_ALL_FDS when forking off a
child, since we don't want to pass fds to the processes spawned (either
because we later want to execve() some other process there, or because
our child might hang around for longer than expected, in which case it
shouldn't keep our fd pinned). This also closes any logging fds, and
thus means logging is turned off in the child. If we want to do proper
logging, explicitly reopen the logs hence in the child at the right
time.
This is particularly crucial in the umount/remount children we fork off
the shutdown binary, as otherwise the children can't log, which is
why #8155 is harder to debug than necessary: the log messages we
generate about failing mount() system calls aren't actually visible on
screen, as they done in the child processes where the log fds are
closed.
We used to set this, but this was dropped when shutdown got taught to
get the target passed in from the regular PID 1. Let's readd this to
make things more explanatory, and cover all grounds, since after all the
target passed is in theory an optional part of the protocol between the
regular PID 1 and the shutdown PID 1.
Previously, we'd try to open kmsg on failure of the journal/syslog even
if no automatic fallback to kmsg was requested — and we wouldn't even
use the open connection afterwards...
We maintain an "extra" set of IP accounting counters that are used when
we systemd is reloaded to carry over the counters from the previous run.
Let's reset these to zero whenever IP accounting is turned off. If we
don't do this then turning off IP accounting and back on later wouldn't
reset the counters, which is quite surprising and different from how our
CPU time counting works.
