This patch adds netdev ipvtap that is based on the
IP-VLAN network interface, called ipvtap. An ipvtap device can be created
in the same way as an ipvlan device, using 'kind ipvtap', and then accessed
using the tap user space interface.
Media Access Control Security (MACsec) is an 802.1AE IEEE
industry-standard security technology that provides secure
communication for all traffic on Ethernet links.
MACsec provides point-to-point security on Ethernet links between
directly connected nodes and is capable of identifying and preventing
most security threats, including denial of service, intrusion,
man-in-the-middle, masquerading, passive wiretapping, and playback attacks.
Closes#5754
If e.g., an [Address] section has an invalid setting, then
previously assigned settings in the section is freed, and
only later settings are stored. That may cause partially broken
section stored in Network object.
This makes if an invalid setting is found, then set 'invalid' flag
instead of freeing it. And invalid sections are dropped later by
network_verify().
Previously, the route is added when the .network config is assigned
to a Link. So, if multiple links match the .network file, the route
entry becomes duplicated in the corresponding Network object.
When enabled, three samples are used to determine the value of a
received bit by majority rule.
This patch adds support for the TripleSampling= option in the [CAN]
section of .network files.
Previously, if a .networ file contains invalid [Address] or [Route]
section, then the file is completely dropped. This makes networkd
just drops invalid sections.
This test case is a bit silly, but it shows that our code is unprepared to
handle so many network servers, with quadratic complexity in various places.
I don't think there are any valid reasons to have hundres of NTP servers
configured, so let's just emit a warning and cut the list short.
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=13354
And before resolving NetDev names, check conditions in .network,
and if they do not match the system environment, drop the network
unit earlier.
Fixes#4211.
We were already using OrderedSets in the manager object, but strvs in the
configuration parsing code. Using sets gives us better scaling when many
domains are used.
In oss-fuzz #13059 the attached reproducer takes approximately 30.5 s to be
parsed. Converting to sets makes this go down to 10s. This is not _vastly_
faster, but using sets seems like a nicer approach anyway. In particular, we
avoid the quadratic de-unification operation after each addition.
Some settings cannot set simultaneously. Let's warn and drop
incompatible settings.
Currently, it is not comprehensive. But this may be a good first step.
Otherwise, LIST_REMOVE() in network_free() fails.
This fixes the following assertion:
```
systemd-networkd[2595]: Bus bus-api-network: changing state UNSET → OPENING
systemd-networkd[2595]: Bus bus-api-network: changing state OPENING → AUTHENTICATING
systemd-networkd[2595]: timestamp of '/etc/systemd/network' changed
systemd-networkd[2595]: /etc/systemd/network/10-hoge.network:1: Invalid section header '[Network]Address=192.168.0.1'
systemd-networkd[2595]: /etc/systemd/network/10-hoge.network:1: Failed to parse file: Bad message
systemd-networkd[2595]: Assertion '*_head == _item' failed at ../../home/watanabe/git/systemd/src/network/networkd-network.c:378, function network_free(). Aborting.
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== Process terminating with default action of signal 6 (SIGABRT): dumping core
valgrind[2595]: ==2595== at 0x4BCA53F: raise (in /usr/lib64/libc-2.28.so)
valgrind[2595]: ==2595== by 0x4BB4894: abort (in /usr/lib64/libc-2.28.so)
valgrind[2595]: ==2595== by 0x4955F09: log_assert_failed_realm (log.c:795)
valgrind[2595]: ==2595== by 0x417101: network_free (networkd-network.c:378)
valgrind[2595]: ==2595== by 0x415E99: network_freep (networkd-network.h:282)
valgrind[2595]: ==2595== by 0x416AB2: network_load_one (networkd-network.c:101)
valgrind[2595]: ==2595== by 0x416C39: network_load (networkd-network.c:293)
valgrind[2595]: ==2595== by 0x414031: manager_load_config (networkd-manager.c:1502)
valgrind[2595]: ==2595== by 0x40B258: run (networkd.c:82)
valgrind[2595]: ==2595== by 0x40B74A: main (networkd.c:117)
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== HEAP SUMMARY:
valgrind[2595]: ==2595== in use at exit: 32,621 bytes in 201 blocks
valgrind[2595]: ==2595== total heap usage: 746 allocs, 545 frees, 241,027 bytes allocated
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== LEAK SUMMARY:
valgrind[2595]: ==2595== definitely lost: 0 bytes in 0 blocks
valgrind[2595]: ==2595== indirectly lost: 0 bytes in 0 blocks
valgrind[2595]: ==2595== possibly lost: 0 bytes in 0 blocks
valgrind[2595]: ==2595== still reachable: 32,621 bytes in 201 blocks
valgrind[2595]: ==2595== suppressed: 0 bytes in 0 blocks
valgrind[2595]: ==2595== Reachable blocks (those to which a pointer was found) are not shown.
valgrind[2595]: ==2595== To see them, rerun with: --leak-check=full --show-leak-kinds=all
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== For counts of detected and suppressed errors, rerun with: -v
valgrind[2595]: ==2595== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
systemd-coredump[2600]: Process 2595 (memcheck-amd64-) of user 192 dumped core.
```
An earlier commit 0e408b82b (dhcp6-client: handle IAID with value zero)
introduced a flag to sd_dhcp6_client to distinguish between an unset
IAID and a value set to zero.
However, that was not sufficient and broke leaving the setting
uninitialized in networkd configuration. The configuration parsing
also must distinguish between the default, unset value and an
explict zero configuration.
Fixes: 0e408b82b8
https://tools.ietf.org/html/rfc1035#section-2.3.1 says (approximately)
that only letters, numbers, and non-leading non-trailing dashes are allowed
(for entries with A/AAAA records). We set no restrictions.
hosts(5) says:
> Host names may contain only alphanumeric characters, minus signs ("-"), and
> periods ("."). They must begin with an alphabetic character and end with an
> alphanumeric character.
nss-files follows those rules, and will ignore names in /etc/hosts that do not
follow this rule.
Let's follow the documented rules for /etc/hosts. In particular, this makes us
consitent with nss-files, reducing surprises for the user.
I'm pretty sure we should apply stricter filtering to names received over DNS
and LLMNR and MDNS, but it's a bigger project, because the rules differ
depepending on which level the label appears (rules for top-level names are
stricter), and this patch takes the minimalistic approach and only changes
behaviour for /etc/hosts.
Escape syntax is also disallowed in /etc/hosts, even if the resulting character
would be allowed. Other tools that parse /etc/hosts do not support this, and
there is no need to use it because no allowed characters benefit from escaping.
When using networkd we currently have no way of ensuring that static
neighbor entries are set when our link comes up. This change adds a new
section to the network definition that allows multiple static neighbors
to be set on a link.
The assertion was added in dbffab87f1 but I'm not exactly sure
why. Now it just crashes a fuzzer I wrote. I, of course, could fix the fuzzer
so that it would generate names ending in ".network" if anyone would tell
me why the assertion should be kept here.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This patch add support to enables to send User Class option code 77
RFC 3004.
This option MAY carry multiple User Classes.
The format of this option is as follows:
Code Len Value
+-----+-----+--------------------- . . . --+
| 77 | N | User Class Data ('Len' octets) |
+-----+-----+--------------------- . . . --+
where Value consists of one or more instances of User Class Data.
Each instance of User Class Data is formatted as follows:
UC_Len_i User_Class_Data_i
+--------+------------------------ . . . --+
| L_i | Opaque-Data ('UC_Len_i' octets) |
+--------+------------------------ . . . --+
UserClass=
A DHCPv4 client can use UserClass option to identify the type or category of user or applications
it represents. The information contained in this option is an string that represents the user class
of which the client is a member. Each class sets an identifying string of information to be used by the DHCP service to classify clients. Takes a whitespace-separated list.
UserClass= hello world how are you
Closes: RFC: #5134
Rather than choosing to set or unset any of these flag
use kernel defaults. This patch makes following properties to unset.
UseBPDU = unset
HairPin = unset
FastLeave = unset
AllowPortToBeRoot = unset
UnicastFlood = unset
This cleans up handling of MTU values across the codebase. Previously
MTU values where stored sometimes in uint32_t, sometimes in uint16_t,
sometimes unsigned and sometimes in size_t. This now unifies this to
uint32_t across the codebase, as that's what netlink spits out, and what
the majority was already using.
Also, all MTU parameters are now parsed with config_parse_mtu() and
config_parse_ipv6_mtu() is dropped as it is now unneeded.
(Note there is one exception for the MTU typing: in the DCHPv4 code we
continue to process the MTU as uint16_t value, as it is encoded like
that in the protocol, and it's probably better stay close to the
protocol there.)
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This macro will read a pointer of any type, return it, and set the
pointer to NULL. This is useful as an explicit concept of passing
ownership of a memory area between pointers.
This takes inspiration from Rust:
https://doc.rust-lang.org/std/option/enum.Option.html#method.take
and was suggested by Alan Jenkins (@sourcejedi).
It drops ~160 lines of code from our codebase, which makes me like it.
Also, I think it clarifies passing of ownership, and thus helps
readability a bit (at least for the initiated who know the new macro)
This makes users can configure DHCPv4 client with ClientIdentifier=duid-only.
If set so, then DHCP client sends only DUID as the client identifier.
This may not be RFC compliant, but some setups require this.
Closes#7828.
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
This adds a simple condition/assert/match to the service manager, to
udev's .link handling and to networkd, for matching the kernel version
string.
In this version we only do fnmatch() based globbing, but we might want
to extend that to version comparisons later on, if we like, by slightly
extending the syntax with ">=", "<=", ">", "<" and "==" expressions.
RequiredForOnline= denotes a link/network that does/does not require being up
for systemd-networkd-wait-online to consider the system online; this makes it
possible to ignore devices without modifying parameters to wait-online.
Add EmitDNS= and EmitDomains= options to the IPv6PrefixDelegation
network configuration file section so that sending DNS servers
and DNS search domains can be configured independent of each other.
The default values for both are set to true.
When an interface has been enslaved to a VRF the received routes should
be added to the VRFs RT instead of the main table.
This change modifies the default behaviour of routes in the case where a
network belongs to an VRF. When the user does not configure a
`DHCP.RouteTable` in a `systemd.network` file and the interface belongs
to a VRF, the VRFs routing table is used instead of RT_TABLE_MAIN.
When the user has configured a custom routing table for DHCP the VRFs
table is ignored and the users preference takes precedence.
Typically when DHCP server sets MTU it is a lower one. And a lower than usual
MTU is then thus required on said network to have operational networking. This
makes networkd's dhcp client to work in more similar way to other dhcp-clients
(e.g. isc-dhcp). In particular, in a cloud setting, without this default
instances have resulted in timing out talking to cloud metadata source and
failing to provision.
This does not change this default for the Annonymize code path.
Parse DNS search domains from .network files so that they are included
in Router Advertisement DNSSL options.
DNS search domains are added to the [IPv6PrefixDelegation] section using
the following syntax:
Domains=foo.example.com bar.example.com
If IDNA libraries are enabled in systemd, international domain names
are supported.
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask