This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This patch add support to enables to send User Class option code 77
RFC 3004.
This option MAY carry multiple User Classes.
The format of this option is as follows:
Code Len Value
+-----+-----+--------------------- . . . --+
| 77 | N | User Class Data ('Len' octets) |
+-----+-----+--------------------- . . . --+
where Value consists of one or more instances of User Class Data.
Each instance of User Class Data is formatted as follows:
UC_Len_i User_Class_Data_i
+--------+------------------------ . . . --+
| L_i | Opaque-Data ('UC_Len_i' octets) |
+--------+------------------------ . . . --+
UserClass=
A DHCPv4 client can use UserClass option to identify the type or category of user or applications
it represents. The information contained in this option is an string that represents the user class
of which the client is a member. Each class sets an identifying string of information to be used by the DHCP service to classify clients. Takes a whitespace-separated list.
UserClass= hello world how are you
Closes: RFC: #5134
Rather than choosing to set or unset any of these flag
use kernel defaults. This patch makes following properties to unset.
UseBPDU = unset
HairPin = unset
FastLeave = unset
AllowPortToBeRoot = unset
UnicastFlood = unset
This cleans up handling of MTU values across the codebase. Previously
MTU values where stored sometimes in uint32_t, sometimes in uint16_t,
sometimes unsigned and sometimes in size_t. This now unifies this to
uint32_t across the codebase, as that's what netlink spits out, and what
the majority was already using.
Also, all MTU parameters are now parsed with config_parse_mtu() and
config_parse_ipv6_mtu() is dropped as it is now unneeded.
(Note there is one exception for the MTU typing: in the DCHPv4 code we
continue to process the MTU as uint16_t value, as it is encoded like
that in the protocol, and it's probably better stay close to the
protocol there.)
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This macro will read a pointer of any type, return it, and set the
pointer to NULL. This is useful as an explicit concept of passing
ownership of a memory area between pointers.
This takes inspiration from Rust:
https://doc.rust-lang.org/std/option/enum.Option.html#method.take
and was suggested by Alan Jenkins (@sourcejedi).
It drops ~160 lines of code from our codebase, which makes me like it.
Also, I think it clarifies passing of ownership, and thus helps
readability a bit (at least for the initiated who know the new macro)
This makes users can configure DHCPv4 client with ClientIdentifier=duid-only.
If set so, then DHCP client sends only DUID as the client identifier.
This may not be RFC compliant, but some setups require this.
Closes#7828.
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
This adds a simple condition/assert/match to the service manager, to
udev's .link handling and to networkd, for matching the kernel version
string.
In this version we only do fnmatch() based globbing, but we might want
to extend that to version comparisons later on, if we like, by slightly
extending the syntax with ">=", "<=", ">", "<" and "==" expressions.
RequiredForOnline= denotes a link/network that does/does not require being up
for systemd-networkd-wait-online to consider the system online; this makes it
possible to ignore devices without modifying parameters to wait-online.
Add EmitDNS= and EmitDomains= options to the IPv6PrefixDelegation
network configuration file section so that sending DNS servers
and DNS search domains can be configured independent of each other.
The default values for both are set to true.
When an interface has been enslaved to a VRF the received routes should
be added to the VRFs RT instead of the main table.
This change modifies the default behaviour of routes in the case where a
network belongs to an VRF. When the user does not configure a
`DHCP.RouteTable` in a `systemd.network` file and the interface belongs
to a VRF, the VRFs routing table is used instead of RT_TABLE_MAIN.
When the user has configured a custom routing table for DHCP the VRFs
table is ignored and the users preference takes precedence.
Typically when DHCP server sets MTU it is a lower one. And a lower than usual
MTU is then thus required on said network to have operational networking. This
makes networkd's dhcp client to work in more similar way to other dhcp-clients
(e.g. isc-dhcp). In particular, in a cloud setting, without this default
instances have resulted in timing out talking to cloud metadata source and
failing to provision.
This does not change this default for the Annonymize code path.
Parse DNS search domains from .network files so that they are included
in Router Advertisement DNSSL options.
DNS search domains are added to the [IPv6PrefixDelegation] section using
the following syntax:
Domains=foo.example.com bar.example.com
If IDNA libraries are enabled in systemd, international domain names
are supported.
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
Parse DNS IPv6 addresses and DNS server lifetime from .network files
so that they can be included in Router Advertisement RDNSS options.
RDNSS address and lifetime information is added to the
[IPv6PrefixDelegation] section according to the following syntax:
DNS=2001:db8:🅰️b 2001:db8::c:d
DNSLifetimeSec=1042
to initialize Network variables when Anonymize is true.
* do not send hostname
* client identifier set to MAC
* do not send vendor class identifier
* do not send other PRL options
Add variables for enabling Router Advertisements, router lifetime as
well as managed and other information flags indicating use of DHCPv6.
Add configuration of default router preferences as defined in RFC 4191.
IPv6PrefixDelegation in the [Network] section has to be set in order
to enable prefix delegation. The rest of the prefix delegation values
are stored in the [IPv6PrefixDelegation] section. The host will act as
a default router if it is given a non-zero lifetime with
RouterLifetimeSec. Managed and OtherInformation booleans set the level
of DHCPv6 support, and the RouterPreference configures the router's
preference between low, medium and high. Words 'normal' and 'default'
are added as synonyms for 'medium' just to make configuration simpler.
This adds a section like the following to .network configuration files:
[Network]
IPv6PrefixDelegation=true
[IPv6PrefixDelegation]
RouterLifetimeSec=2000
Managed=false
OtherInformation=true
RouterPreference=medium
