We'd only set the description after the device appeared in sysfs, so
we'd always print
"A start job is running for dev-disk-by\x2duuid-aaaa ... aaaa.device (42s / 1min 30s)"
Let's make this
"A start job is running for /dev/disk/by-duuid/aaaa ... aaaa (42s / 1min 30s)"
https://bugzilla.redhat.com/show_bug.cgi?id=1655860
This allows clients to follow our internal state changes safely.
Previously, quick state changes (for example, when we restart a unit due
to Restart= after it quickly transitioned through DEAD/FAILED states)
would be coalesced into one bus signal event, with this change there's
the guarantee that all state changes after the unit was announced ones
are reflected on th bus.
Note we only do this kind of guaranteed flushing only for unit state
changes, not for other unit property changes, where clients still have
to expect coalescing. This is because the unit state is a very
important, high-level concept.
Fixes: #10185
Let's be more careful with what we serialize: let's ensure we never
serialize strings that are longer than LONG_LINE_MAX, so that we know we
can read them back with read_line(…, LONG_LINE_MAX, …) safely.
In order to implement this all serialization functions are move to
serialize.[ch], and internally will do line size checks. We'd rather
skip a serialization line (with a loud warning) than write an overly
long line out. Of course, this is just a second level protection, after
all the data we serialize shouldn't be this long in the first place.
While we are at it also clean up logging: while serializing make sure to
always log about errors immediately. Also, (void)ify all calls we don't
expect errors in (or catch errors as part of the general
fflush_and_check() at the end.
This compensates for the unsynchronized reload cycles of systemd and
udev: we manually trigger the deps listed in SYSTEMD_WANTS properties if
they change for device units that are already up. That way all deps
defined that way will be triggered at least once: the first time the
unit goes up by the usual dependency logic, and if it already is up by
the device.c specific logic.
Fixes: #9323
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This reworks how device units are "powered on".
This makes sure that any device changes that might have happened while
we were restarting/reloading will be noticed properly. For that we'll
now properly serialize/deserialize both the device unit state and the
device "found" flags, and restore these initially in the "coldplug"
phase of the manager deserialization. While enumerating the udev devices
during startup we'll put together a new "found" flags mask, which we'll
the switch to in the "catchup" phase of the manager deserialization,
which follows the "coldplug" phase.
Note that during the "coldplug" phase no unit state change events are
generated, which is different for the "catchall" phase which will do
that. Thus we correctly make sure that the deserialized state won't pull
in new deps, but any device's change while we were reloading would.
Fixes: #8832
Replaces: #8675
let's drop the "now" argument, it's exactly what MANAGER_IS_RUNNING()
returns, hence let's use that instead to simplify things.
Moreover, let's change the add/found argument pair to become found/mask,
which allows us to change multiple flags at the same time into opposing
directions, which will be useful later on.
Also, let's change the return type to void. It's a notifier call where
callers will ignore the return value anyway as it is nothing actionable.
Should not change behaviour.
This adds a flags parameter to unit_notify() which can be used to pass
additional notification information to the function. We the make the old
reload_failure boolean parameter one of these flags, and then add a new
flag that let's unit_notify() if we are configured to restart the
service.
Note that this adjusts behaviour of systemd to match what the docs say.
Fixes: #8398
When I see "test", I have to think three times what the return value
means. With "below" this is immediately clear. ratelimit_below(&limit)
sounds almost like English and is imho immediately obvious.
(I also considered ratelimit_ok, but this strongly implies that being under the
limit is somehow better. Most of the times this is true, but then we use the
ratelimit to detect triple-c-a-d, and "ok" doesn't fit so well there.)
C.f. a1bcaa07.
In particular, this confirms that the Found state needs to remain a bit-field:
$ systemd-analyze dump |grep 'Found: '|sort |uniq -c
105 Found: found-udev
3 Found: found-udev,found-mount
1 Found: found-udev,found-swap
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
I'm not sure if I understand the original code. AFAICS, errno does not
have to be set at all in this callback.
ratelimit_test() returns positive if we are under limit. The code would only
log if the condition happened very often, which I assume is not inteded, and
this check was supposed to prevent too much logging.
Do not try to party initialize a device during deserialization if it's not
known by udev (anymore) and therefore hasn't been seen during device
enumeration.
The device unit in this case has not been initialized properly and setting it
in the "plugged" state can be confusing.
Actually this happens during every boots when PID switches to the new rootfs:
PID is reexecuted and enumerates devices but since udev is not running, the
list of enumerated devices is empty.
PID1 updates the state of device units upon 2 different events:
- when it processes an event sent by udev and in this case the device deps are
started if the device enters in the "plugged" state.
- when it enumerates all devices during its startup or when it is asked to
reload its configuration data but in this case the device deps (if any) are
not retroactively started.
When udev processes a new "add" kernel event, it first registers the new device
in its databases then sends an event to systemd.
If for any reason, systemd is asked to reload its configuration between the
previous 2 steps, it might see for the first time the new device while scanning
/sys for all devices. Only during a second step, udev will send the event for
the new device.
In this peculiar case the device deps wont be started (even though the device
is first seen by PID1).
Indeed when reloading its configurations, PID1 will put the device unit in the
"plugged" state but without starting the device deps. Thereafter PID1 will get
the event from udev for the new device but the device unit will be in "plugged"
state already therefore it won't see any need to start the device dependencies.
Rather than assuming that during the reloading of systemd manager configuration
all devices listed in udev DBs have been already processed and should be put in
the "plugged" state (done by device_coldplug()), this patch does that only for
devices which have been processed via an udev event (device_dispatch_io())
previously. In this case we set "d->found" to "DEVICE_FOUND_UDEV" and we make
also sure to no more initialize "d->found" while enumerating devices. Instead
this field is now saved/restored while devices are serialized.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
The warning is not emitted for absolute paths like /dev/sda or /home, which are
converted to .device and .mount unit names without any fuss.
Most of the time it's unlikely that users use invalid unit names on purpose,
so let's warn them. Warnings are silenced when --quiet is used.
$ build/systemctl show -p Id hello@foo-bar/baz
Invalid unit name "hello@foo-bar/baz" was escaped as "hello@foo-bar-baz" (maybe you should use systemd-escape?)
Id=hello@foo-bar-baz.service
$ build/systemd-run --user --slice foo-bar/baz --unit foo-bar/foo true
Invalid unit name "foo-bar/foo" was escaped as "foo-bar-foo" (maybe you should use systemd-escape?)
Invalid unit name "foo-bar/baz" was escaped as "foo-bar-baz" (maybe you should use systemd-escape?)
Running as unit: foo-bar-foo.service
Fixes#8302.