If the peripheral device type is that of a host managed zone block device (0x14),
the device supports the same identification mechanisms as conventional disks (0x00).
Original revisions of the SAT (SCSI-ATA Translation) specification
required that all sense data be reported in Descriptor Format (72h).
Later revisions specifcally allow and account for sense data being
reported in Fixed Format (70h).
The current code checks for a Descriptor Format sense structure (0x72),
then looks specifically at the first byte of the first descriptor for the
ATA specific code 0x9, cross referencing it with the first byte which is
just a length field 0x0c (as a sanity check).
In the Fixed Format case(0x70), we can fall back to using the top-level
SCSI Sense data for the Additional Sense code (0x0) and then the
Additional Sense Code Qualifier (0x1d),
That identifies that the sense data is of the format associated with:
`ATA PASS THROUGH INFORMATION AVAILABLE`.
This fallback mechanism retains support for SATLs compliant with ANSI
INCITS 431-2007, and enables support for Fixed Format Sense data
enabled by SATLs with later revisions.
Glad to do so. This patch allows ata_id to export attributes correctly. I believe that any drive can potentially return information in this format on any SATL using the libata-scsi (the Linux builtin SATL), but in this particular case, it appears it is the SATL itself. Attaching the disk to the AHCI controller changes the behavior impacted here. (Not entirely surprisingly, SATLs are are pretty inconsistent).
Test:
This case specifically is an LSI SATL. I'll illustrate that without the patch, ata_id does not return
any output for a valid SATA drive but after the patch does.
1. Verify the device is ATA, by looking at the vpd page specific to ATA drives
```
root@machine:~# sg_vpd -p ai /dev/sdn
ATA information VPD page:
SAT Vendor identification: LSI
SAT Product identification: LSI SATL
SAT Product revision level: 0008
Device signature indicates SATA transport
ATA command IDENTIFY DEVICE response summary:
model: HGST HUH728080ALE604
serial number: ZZZZH3VX
firmware revision: A4GNW7J0
```
2. Look at what udev thinks of the disk, it says ID_BUS=scsi
ATA information says ID_MODEL should be HGST_HUH728080ALE604
udev says it is HGST_HUH728080AL (Missing E604, 4 bytes), and no ATA attributes are
populated.
```
root@machine:~# udevadm info -q all /dev/sdn
P: /devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn
N: sdn
S: disk/by-id/scsi-35000cca23be1dc3c
S: disk/by-id/wwn-0x5000cca23be1dc3c
S: disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0
E: DEVLINKS=/dev/disk/by-id/wwn-0x5000cca23be1dc3c /dev/disk/by-id/scsi-35000cca23be1dc3c /dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0
E: DEVNAME=/dev/sdn
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn
E: DEVTYPE=disk
E: ID_BUS=scsi
E: ID_MODEL=HGST_HUH728080AL
E: ID_MODEL_ENC=HGST\x20HUH728080AL
E: ID_PATH=pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0
E: ID_PATH_TAG=pci-0000_05_00_0-sas-exp0x500605b0000272bf-phy11-lun-0
E: ID_REVISION=W7J0
E: ID_SCSI=1
E: ID_SCSI_SERIAL=ZZZZH3VX
E: ID_SERIAL=35000cca23be1dc3c
E: ID_SERIAL_SHORT=5000cca23be1dc3c
E: ID_TYPE=disk
E: ID_VENDOR=ATA
E: ID_VENDOR_ENC=ATA\x20\x20\x20\x20\x20
E: ID_WWN=0x5000cca23be1dc3c
E: ID_WWN_WITH_EXTENSION=0x5000cca23be1dc3c
E: MAJOR=8
E: MINOR=208
E: SUBSYSTEM=block
E: TAGS=:systemd:
```
3. Run ata_id (unpatched) (Outputs nothing, RC=2)
```
root@machine:~# strace -e ioctl /lib/udev/ata_id /dev/sdn -x
ioctl(3, SG_IO, {'Q', BSG_PROTOCOL_SCSI, BSG_SUB_PROTOCOL_SCSI_CMD, request[6]=[12, 00, 00, 00, 24, 00], request_tag=0, request_attr=0, request_priority=0, request_extra=0, max_response_len=32, dout_iovec_count=0, dout_xfer_len=0, din_iovec_count=0, din_xfer_len=36, timeout=30000, flags=0, usr_ptr=0, spare_in=0, dout[0]=NULL}) = -1 EINVAL (Invalid argument)
ioctl(3, SG_IO, {'S', SG_DXFER_FROM_DEV, cmd[6]=[12, 00, 00, 00, 24, 00], mx_sb_len=32, iovec_count=0, dxfer_len=36, timeout=30000, flags=0, data[36]=[00, 00, 06, 12, 45, 00, 00, 02, 41, 54, 41, 20, 20, 20, 20, 20, 48, 47, 53, 54, 20, 48, 55, 48, 37, 32, 38, 30, 38, 30, 41, 4c, ...], status=00, masked_status=00, sb[0]=[], host_status=0, driver_status=0, resid=0, duration=1, info=0}) = 0
ioctl(3, SG_IO, {'Q', BSG_PROTOCOL_SCSI, BSG_SUB_PROTOCOL_SCSI_CMD, request[12]=[a1, 08, 2e, 00, 01, 00, 00, 00, 00, ec, 00, 00], request_tag=0, request_attr=0, request_priority=0, request_extra=0, max_response_len=32, dout_iovec_count=0, dout_xfer_len=0, din_iovec_count=0, din_xfer_len=512, timeout=30000, flags=0, usr_ptr=0, spare_in=0, dout[0]=NULL}) = -1 EINVAL (Invalid argument)
ioctl(3, SG_IO, {'S', SG_DXFER_FROM_DEV, cmd[12]=[a1, 08, 2e, 00, 01, 00, 00, 00, 00, ec, 00, 00], mx_sb_len=32, iovec_count=0, dxfer_len=512, timeout=30000, flags=0, data[0]=[], status=02, masked_status=01, sb[18]=[70, 00, 01, 00, 00, 00, 00, 0a, 00, 00, 00, 00, 00, 1d, 00, 00, 00, 00], host_status=0, driver_status=0x8, resid=512, duration=0, info=0x1}) = 0
ioctl(3, HDIO_GET_IDENTITY, 0x7ffe408f7590) = -1 EINVAL (Invalid argument)
+++ exited with 2 +++
```
Sense buffers visible with the strace:
`sb[18]=[70, 00, 01, 00, 00, 00, 00, 0a, 00, 00, 00, 00, 00, 1d, 00, 00, 00, 00]` is the important bit, see 70, 0a and 1d bytes
4. Run patched version: model is HGST_HUH728080ALE604 as expected, ATA attributes are
correctly populated.
```
root@machine:~# ./ata_id /dev/sdn -x
ID_ATA=1
ID_TYPE=disk
ID_BUS=ata
ID_MODEL=HGST_HUH728080ALE604
ID_MODEL_ENC=HGST\x20HUH728080ALE604\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_REVISION=A4GNW7J0
ID_SERIAL=HGST_HUH728080ALE604_ZZZZH3VX
ID_SERIAL_SHORT=ZZZZH3VX
ID_ATA_WRITE_CACHE=1
ID_ATA_WRITE_CACHE_ENABLED=1
ID_ATA_FEATURE_SET_HPA=1
ID_ATA_FEATURE_SET_HPA_ENABLED=1
ID_ATA_FEATURE_SET_PM=1
ID_ATA_FEATURE_SET_PM_ENABLED=1
ID_ATA_FEATURE_SET_SECURITY=1
ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=66522
ID_ATA_FEATURE_SET_SMART=1
ID_ATA_FEATURE_SET_SMART_ENABLED=1
ID_ATA_FEATURE_SET_PUIS=1
ID_ATA_FEATURE_SET_PUIS_ENABLED=0
ID_ATA_FEATURE_SET_APM=1
ID_ATA_FEATURE_SET_APM_ENABLED=1
ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=254
ID_ATA_DOWNLOAD_MICROCODE=1
ID_ATA_SATA=1
ID_ATA_SATA_SIGNAL_RATE_GEN2=1
ID_ATA_SATA_SIGNAL_RATE_GEN1=1
ID_ATA_ROTATION_RATE_RPM=7200
ID_WWN=0x5000cca23be1dc3c
ID_WWN_WITH_EXTENSION=0x5000cca23be1dc3c
```
5. Drop it in place and verify: we see that ata_id does work.
```
root@hw1-b01left-2212a:~# udevadm test /block/sdn
<truncated>
GROUP 6 /lib/udev/rules.d/50-udev-default.rules:55
IMPORT 'ata_id --export /dev/sdn' /lib/udev/rules.d/60-persistent-storage.rules:33
starting 'ata_id --export /dev/sdn'
'ata_id --export /dev/sdn'(out) 'ID_ATA=1'
'ata_id --export /dev/sdn'(out) 'ID_TYPE=disk'
'ata_id --export /dev/sdn'(out) 'ID_BUS=ata'
'ata_id --export /dev/sdn'(out) 'ID_MODEL=HGST_HUH728080ALE604'
'ata_id --export /dev/sdn'(out) 'ID_MODEL_ENC=HGST\x20HUH728080ALE604\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20'
'ata_id --export /dev/sdn'(out) 'ID_REVISION=A4GNW7J0'
'ata_id --export /dev/sdn'(out) 'ID_SERIAL=HGST_HUH728080ALE604_ZZZZH3VX'
'ata_id --export /dev/sdn'(out) 'ID_SERIAL_SHORT=ZZZZH3VX'
'ata_id --export /dev/sdn'(out) 'ID_ATA_WRITE_CACHE=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_WRITE_CACHE_ENABLED=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_HPA=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_HPA_ENABLED=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_PM=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_PM_ENABLED=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_SECURITY=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_SECURITY_ENABLED=0'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=66522'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_SMART=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_SMART_ENABLED=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_PUIS=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_PUIS_ENABLED=0'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_APM=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_APM_ENABLED=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=254'
'ata_id --export /dev/sdn'(out) 'ID_ATA_DOWNLOAD_MICROCODE=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_SATA=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_SATA_SIGNAL_RATE_GEN2=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_SATA_SIGNAL_RATE_GEN1=1'
'ata_id --export /dev/sdn'(out) 'ID_ATA_ROTATION_RATE_RPM=7200'
'ata_id --export /dev/sdn'(out) 'ID_WWN=0x5000cca23be1dc3c'
'ata_id --export /dev/sdn'(out) 'ID_WWN_WITH_EXTENSION=0x5000cca23be1dc3c'
Process 'ata_id --export /dev/sdn' succeeded.
LINK 'disk/by-id/ata-HGST_HUH728080ALE604_ZZZZH3VX' /lib/udev/rules.d/60-persistent-storage.rules:47
IMPORT builtin 'path_id' /lib/udev/rules.d/60-persistent-storage.rules:65
LINK 'disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0' /lib/udev/rules.d/60-persistent-storage.rules:66
IMPORT builtin 'blkid' /lib/udev/rules.d/60-persistent-storage.rules:81
probe /dev/sdn raid offset=0
LINK 'disk/by-id/wwn-0x5000cca23be1dc3c' /lib/udev/rules.d/60-persistent-storage.rules:88
RUN '/usr/lib/python-dsnet-appliance/hotplug disk udev-disk-add' /etc/udev/rules.d/99-appliance-hotplug.rules:1
update old name, '/dev/disk/by-id/scsi-35000cca23be1dc3c' no longer belonging to '/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn'
no reference left, remove '/dev/disk/by-id/scsi-35000cca23be1dc3c'
handling device node '/dev/sdn', devnum=b8:208, mode=0660, uid=0, gid=6
preserve permissions /dev/sdn, 060660, uid=0, gid=6
preserve already existing symlink '/dev/block/8:208' to '../sdn'
creating link '/dev/disk/by-id/ata-HGST_HUH728080ALE604_ZZZZH3VX' to '/dev/sdn'
creating symlink '/dev/disk/by-id/ata-HGST_HUH728080ALE604_ZZZZH3VX' to '../../sdn'
found 'b8:208' claiming '/run/udev/links/\x2fdisk\x2fby-id\x2fwwn-0x5000cca23be1dc3c'
creating link '/dev/disk/by-id/wwn-0x5000cca23be1dc3c' to '/dev/sdn'
preserve already existing symlink '/dev/disk/by-id/wwn-0x5000cca23be1dc3c' to '../../sdn'
found 'b8:208' claiming '/run/udev/links/\x2fdisk\x2fby-path\x2fpci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0'
creating link '/dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0' to '/dev/sdn'
preserve already existing symlink '/dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0' to '../../sdn'
created db file '/run/udev/data/b8:208' for '/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn'
ACTION=add
DEVLINKS=/dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0 /dev/disk/by-id/ata-HGST_HUH728080ALE604_ZZZZH3VX /dev/disk/by-id/wwn-0x5000cca23be1dc3c
DEVNAME=/dev/sdn
DEVPATH=/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn
DEVTYPE=disk
ID_ATA=1
ID_ATA_DOWNLOAD_MICROCODE=1
ID_ATA_FEATURE_SET_APM=1
ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=254
ID_ATA_FEATURE_SET_APM_ENABLED=1
ID_ATA_FEATURE_SET_HPA=1
ID_ATA_FEATURE_SET_HPA_ENABLED=1
ID_ATA_FEATURE_SET_PM=1
ID_ATA_FEATURE_SET_PM_ENABLED=1
ID_ATA_FEATURE_SET_PUIS=1
ID_ATA_FEATURE_SET_PUIS_ENABLED=0
ID_ATA_FEATURE_SET_SECURITY=1
ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=66522
ID_ATA_FEATURE_SET_SMART=1
ID_ATA_FEATURE_SET_SMART_ENABLED=1
ID_ATA_ROTATION_RATE_RPM=7200
ID_ATA_SATA=1
ID_ATA_SATA_SIGNAL_RATE_GEN1=1
ID_ATA_SATA_SIGNAL_RATE_GEN2=1
ID_ATA_WRITE_CACHE=1
ID_ATA_WRITE_CACHE_ENABLED=1
ID_BUS=ata
ID_MODEL=HGST_HUH728080ALE604
ID_MODEL_ENC=HGST\x20HUH728080ALE604\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_PATH=pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0
ID_PATH_TAG=pci-0000_05_00_0-sas-exp0x500605b0000272bf-phy11-lun-0
ID_REVISION=A4GNW7J0
ID_SERIAL=HGST_HUH728080ALE604_ZZZZH3VX
ID_SERIAL_SHORT=ZZZZH3VX
ID_TYPE=disk
ID_WWN=0x5000cca23be1dc3c
ID_WWN_WITH_EXTENSION=0x5000cca23be1dc3c
MAJOR=8
MINOR=208
SUBSYSTEM=block
TAGS=:systemd:
USEC_INITIALIZED=6055690
run: '/usr/lib/python-dsnet-appliance/hotplug disk udev-disk-add'
Unload module index
Unloaded link configuration context.
```
6. Query just to double check: (ID_BUS=ata, model correct, etc).
```
root@machine:~# udevadm info /dev/sdn
P: /devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn
N: sdn
S: disk/by-id/ata-HGST_HUH728080ALE604_ZZZZH3VX
S: disk/by-id/wwn-0x5000cca23be1dc3c
S: disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0
E: DEVLINKS=/dev/disk/by-id/wwn-0x5000cca23be1dc3c /dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0 /dev/disk/by-id/ata-HGST_HUH728080ALE604_ZZZZH3VX
E: DEVNAME=/dev/sdn
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host2/port-2:0/expander-2:0/port-2:0:11/end_device-2:0:11/target2:0:11/2:0:11:0/block/sdn
E: DEVTYPE=disk
E: ID_ATA=1
E: ID_ATA_DOWNLOAD_MICROCODE=1
E: ID_ATA_FEATURE_SET_APM=1
E: ID_ATA_FEATURE_SET_APM_CURRENT_VALUE=254
E: ID_ATA_FEATURE_SET_APM_ENABLED=1
E: ID_ATA_FEATURE_SET_HPA=1
E: ID_ATA_FEATURE_SET_HPA_ENABLED=1
E: ID_ATA_FEATURE_SET_PM=1
E: ID_ATA_FEATURE_SET_PM_ENABLED=1
E: ID_ATA_FEATURE_SET_PUIS=1
E: ID_ATA_FEATURE_SET_PUIS_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY=1
E: ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=66522
E: ID_ATA_FEATURE_SET_SMART=1
E: ID_ATA_FEATURE_SET_SMART_ENABLED=1
E: ID_ATA_ROTATION_RATE_RPM=7200
E: ID_ATA_SATA=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN1=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN2=1
E: ID_ATA_WRITE_CACHE=1
E: ID_ATA_WRITE_CACHE_ENABLED=1
E: ID_BUS=ata
E: ID_MODEL=HGST_HUH728080ALE604
E: ID_MODEL_ENC=HGST\x20HUH728080ALE604\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
E: ID_PATH=pci-0000:05:00.0-sas-exp0x500605b0000272bf-phy11-lun-0
E: ID_PATH_TAG=pci-0000_05_00_0-sas-exp0x500605b0000272bf-phy11-lun-0
E: ID_REVISION=A4GNW7J0
E: ID_SERIAL=HGST_HUH728080ALE604_ZZZZH3VX
E: ID_SERIAL_SHORT=ZZZZH3VX
E: ID_TYPE=disk
E: ID_WWN=0x5000cca23be1dc3c
E: ID_WWN_WITH_EXTENSION=0x5000cca23be1dc3c
E: MAJOR=8
E: MINOR=208
E: SUBSYSTEM=block
E: TAGS=:systemd:
E: USEC_INITIALIZED=6055690
```
If I install the same disk into a machine using an ATA driver, this behavior changes:
```
root@machine2:~# sg_vpd -p ai /dev/sdb
ATA information VPD page:
SAT Vendor identification: linux
SAT Product identification: libata
SAT Product revision level: 3.00
Device signature indicates SATA transport
ATA command IDENTIFY DEVICE response summary:
model: HGST HUH728080ALE604
serial number: ZZZZH3VX
firmware revision: A4GNW7J0
root@machine-2:~# /lib/udev/ata_id -x /dev/sdb
ID_ATA=1
ID_TYPE=disk
ID_BUS=ata
ID_MODEL=HGST_HUH728080ALE604
ID_MODEL_ENC=HGST\x20HUH728080ALE604\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_REVISION=A4GNW7J0
<truncated>
```
$ git grep -e 'This program is free software' -l |grep -v LICENSE | \
xargs perl -i -0pe 's/ \* This program.*?for more details.\s*\*\n( \* You should have.*licenses.>.\n)?//gms'
For some reason they were missed previously. All those files seem to
have proper SDPX tags.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
This function is internal to systemd code, so external users of libudev
will not see those log messages. I think this is better. If we want to
allow that, the function could be put in libudev and exported.
v2: check that the string is more than one char before stripping quotes
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
Commit v218-247-g11c6f69 broke the output of the utility. "%1$" PRIu64
"x" expands to "%1$lux", essentially "%lux", which shows the problem.
u and x cannot be combined, u wins as the type character, and x gets
emitted verbatim to stdout.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1227503
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
Clang is a bit more strict wrt format-nonliterals:
http://clang.llvm.org/docs/LanguageExtensions.html#format-string-checking
Adding these extra printf attributes also makes gcc able to find more
problems. E.g. this patch uncovers a format issue in udev-builtin-path_id.c
Some parts looked intetional about breaking the format-nonliteral check.
I added some supression for warnings there.
b8a2b0f76 'use initalization instead of explicit zeroing'
introduced a bug where only the first sizeof(uint_t*) bytes
would be zeroed out, instead of the whole array.
