Ideally, coccinelle would strip unnecessary braces too. But I do not see any
option in coccinelle for this, so instead, I edited the patch text using
search&replace to remove the braces. Unfortunately this is not fully automatic,
in particular it didn't deal well with if-else-if-else blocks and ifdefs, so
there is an increased likelikehood be some bugs in such spots.
I also removed part of the patch that coccinelle generated for udev, where we
returns -1 for failure. This should be fixed independently.
Pretty much everything uses just the first argument, and this doesn't make this
common pattern more complicated, but makes it simpler to pass multiple options.
This is useful for a couple of cases, I'm mostly interested in case #1:
1. Verifying "reasonable" values in a trivially scriptable way
2. Debugging unexpected time span parsing directly
Test Plan:
```
% build/systemd-analyze timespan 20
Original: 20
μs: 20
Human: 20us
% build/systemd-analyze timespan 20ms
Original: 20ms
μs: 20000
Human: 20ms
% build/systemd-analyze timespan 20z
Failed to parse time span '20z': Invalid argument
```
This is a bit like the info link in most of GNU's --help texts, but we
don't do info but man pages, and we make them properly clickable on
terminal supporting that, because awesome.
I think it's generally advisable to link up our (brief) --help texts and
our (more comprehensive) man pages a bit, so this should be an easy and
straight-forward way to do it.
On target boards without RTC, `t->kernel_time` is 0 or 1 usec.
`systemd-analyze` reads this value over D-Bus from
`org.freedesktop.systemd1.Manager`, property `KernelTimestamp`.
The issue is: if `t->kernel_time` is 0, `systemd-analyze` does not print
the kernel time:
~~~~
$ systemd-analyze
Startup finished in 1.860s (userspace) = 5.957s
~~~~
This commit fixes the misbehaviour:
~~~~
$ systemd-analyze
Startup finished in 3.866s (kernel) + 2.015s (userspace) = 5.881s
~~~~
Fixes#7721.
v2: fixes one more condition (by Yu Watanabe <watanabe.yu+github@gmail.com>)
v3: fixes one more condition (by Kirill Marinushkin <kmarinushkin@de.adit-jv.com>)
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
They are not needed, because anything that is non-zero is converted
to true.
C11:
> 6.3.1.2: When any scalar value is converted to _Bool, the result is 0 if the
> value compares equal to 0; otherwise, the result is 1.
https://stackoverflow.com/questions/31551888/casting-int-to-bool-in-c-c
This introduces a has_data boolean field in struct unit_files which can
be used to detect the end of the array.
Use a _cleanup_ for struct unit_files in acquire_time_data and its
callers. Code for acquire_time_data is also simplified by replacing
goto's with straight returns.
Tested: By running the commands below, also checking them under valgrind.
- build/systemd-analyze blame
- build/systemd-analyze critical-chain
- build/systemd-analyze plot
Fixes: Coverity finding CID 996464.
When multiple configuration file groups are shown together (e.g.
systemd-analyze cat-config systemd/system.conf systemd/user.conf), it's nice
to separate them visually.
I tried first to write a line of spaces and underline that. This does not look
too good, because the line is too low. Then I tried a block of blue-background
spaces. In this version, there are two lines, one is full of spaces and
underlined, so visually we get an empty line in the middle.
I then tried underlining the last line of the previous file. This does not look
right, unless the line is full width, i.e. unless spaces are written out until
the end of the line. But when those spaces are added, it's not clear if they
were part of the original file or not. Here, the spaces are between groups, so
it seems less likely that somebody will mistake those spaces for part of the
configuration file.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
$ build/systemd-analyze time
Bootup is not yet finished (org.freedesktop.systemd1.Manager.FinishTimestampMonotonic=0).
Please try again later.
Hint: Use 'systemctl list-jobs' to see active jobs
The plot command requires a full d-bus bus to fetch the host
information, which seems rather optional, and having a running dbus
daemon is not always desirable. So instead, we try to acquire a full
bus, and if that fails we acquire the systemd bus, in which case we
omit the host information from the output.
We refactor acquire_bus() into two new functions which in addition
makes the call sites clearer.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.