This macro will read a pointer of any type, return it, and set the
pointer to NULL. This is useful as an explicit concept of passing
ownership of a memory area between pointers.
This takes inspiration from Rust:
https://doc.rust-lang.org/std/option/enum.Option.html#method.take
and was suggested by Alan Jenkins (@sourcejedi).
It drops ~160 lines of code from our codebase, which makes me like it.
Also, I think it clarifies passing of ownership, and thus helps
readability a bit (at least for the initiated who know the new macro)
FDSTOREREMOVE=1 removes all fds with the specified name. And we had named
the fds after the session. Better fix that.
Closes#8344.
AFAICT there's no point providing compatibility code for this transition.
No-one would be restarting logind on a system with a GUI (where the
session devices are used), because doing so has been killing the GUI, and
even causing startup of the GUI to fail leading to a restart loop.
Upgrading logind on a running system with a GUI might start being possible
after this commit (and after also fixing the display server of your
choice).
We already don't allow directly opening block devices attached to the seat.
They are handled by udisks instead. Clarify the code used when restarting
logind.
Coverity now started warning about this ("Calling unlinkat without checking
return value (as is done elsewhere 12 out of 15 times).", and it is right:
most of the time we should at list print a log message so people can figure
out something is wrong when this happens.
v2:
- use warning level in journald too (this is unlikely to happen ever, so it
should be safe to something that is visible by default).
This usually is very annoying to users who then cannot log in, so
make sure we always warn if that happens (selinux, or whatever other reason).
This reverts a790812cb3.
This change adds support for controlling the suspend-on-lid-close
behaviour based on the power status as well as whether the machine is
docked or has an external monitor. For backwards compatibility the new
configuration file variable is ignored completely by default, and must
be set explicitly before being considered in any decisions.
log.h really should only include the bare minimum of other headers, as
it is really pulled into pretty much everything else and already in
itself one of the most basic pieces of code we have.
Let's hence drop inclusion of:
1. sd-id128.h because it's entirely unneeded in current log.h
2. errno.h, dito.
3. sys/signalfd.h which we can replace by a simple struct forward
declaration
4. process-util.h which was needed for getpid_cached() which we now hide
in a funciton log_emergency_level() instead, which nicely abstracts
the details away.
5. sys/socket.h which was needed for struct iovec, but a simple struct
forward declaration suffices for that too.
Ultimately this actually makes our source tree larger (since users of
the functionality above must now include it themselves, log.h won't do
that for them), but I think it helps to untangle our web of includes a
tiny bit.
(Background: I'd like to isolate the generic bits of src/basic/ enough
so that we can do a git submodule import into casync for it)
Let's remove a number of synchronization points from our service
startups: let's drop synchronous match installation, and let's opt for
asynchronous instead.
Also, let's use sd_bus_match_signal() instead of sd_bus_add_match()
where we can.
This moves pretty much all uses of getpid() over to getpid_raw(). I
didn't specifically check whether the optimization is worth it for each
replacement, but in order to keep things simple and systematic I
switched over everything at once.
This patch ensures that session devices are saved for each session.
In order to make the revokation logic work when logind is restarted, the
session devices are now saved in the session state files and their respective
file descriptors sent to PID1's fdstore in order to keep them open accross
restart.
This is mandatory in order to keep the revokation logic working. Indeed in case
of input-devices, the same file descriptors must be shared by logind and a
given session controller in order EVIOCREVOKE to work otherwise multiple
sessions can have device access in parallel.
This should be the only remaining and missing piece for making logind fully
restartable.
Fixes: #1163
We don't have plural in the name of any other -util files and this
inconsistency trips me up every time I try to type this file name
from memory. "formats-util" is even hard to pronounce.
The parsing functions for [User]TasksMax were inconsistent. Empty string and
"infinity" were interpreted as no limit for TasksMax but not accepted for
UserTasksMax. Update them so that they're consistent with other knobs.
* Empty string indicates the default value.
* "infinity" indicates no limit.
While at it, replace opencoded (uint64_t) -1 with CGROUP_LIMIT_MAX in TasksMax
handling.
v2: Update empty string to indicate the default value as suggested by Zbigniew
Jędrzejewski-Szmek.
v3: Fixed empty UserTasksMax handling.
Let's change from a fixed value of 12288 tasks per user to a relative value of
33%, which with the kernel's default of 32768 translates to 10813. This is a
slight decrease of the limit, for no other reason than "33%" sounding like a nice
round number that is close enough to 12288 (which would translate to 37.5%).
(Well, it also has the nice effect of still leaving a bit of room in the PID
space if there are 3 cooperating evil users that try to consume all PIDs...
Also, I like my bikesheds blue).
Since the new value is taken relative, and machined's TasksMax= setting
defaults to 16384, 33% inside of containers is usually equivalent to 5406,
which should still be ample space.
To summarize:
| on the host | in the container
old default | 12288 | 12288
new default | 10813 | 5406
For similar reasons as the recent addition of a limit on sessions.
Note that we don't enforce a limit on inhibitors per-user currently, but
there's an implicit one, since each inhibitor takes up one fd, and fds are
limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
Let's make sure we process session and inhibitor pipe fds (that signal
sessions/inhibtors going away) at a higher priority
than new bus calls that might create new sessions or inhibitors. This helps
ensuring that the number of open sessions stays minimal.
We really should put limits on all resources we manage, hence add one to the
number of concurrent sessions, too. This was previously unbounded, hence set a
relatively high limit of 8K by default.
Note that most PAM setups will actually invoke pam_systemd prefixed with "-",
so that the return code of pam_systemd is ignored, and the login attempt
succeeds anyway. On systems like this the session will be created but is not
tracked by systemd.
This ensures that users sessions are properly cleaned up after.
The admin can still enable or disable linger for specific users to allow
them to run processes after they log out. Doing that through the user
session is much cleaner and provides better control.
dbus daemon can now be run in the user session (with --enable-user-session,
added in 1.10.2), and most distributions opted to pick this configuration.
In the normal case it makes a lot of sense to kill remaining processes.
The exception is stuff like screen and tmux. But it's easy enough to
work around, a simple example was added to the man page in previous
commit. In the long run those services should integrate with the systemd
users session on their own.
https://bugs.freedesktop.org/show_bug.cgi?id=94508https://github.com/systemd/systemd/issues/2900
systemd-logind uses mkdir_label and label_fix functions without calling
first mac_selinux_init. This makes /run/user/$UID/ directories not
labelled correctly on an Arch Linux system using SELinux.
Fix this by calling mac_selinux_init("/run") early in systemd-logind.
This makes files created in /etc/udev/rules.d and /var/lib/systemd to be
labelled through transitions in the SELinux policy instead of using
setfscreatecon (with mac_selinux_create_file_prepare).
Issue #2388 suggests the current TasksMax= setting for user processes is to low. Bump it to 12K. Also, bump the
container TasksMax= from 8K to 16K, so that it remains higher than the one for user processes.
(Compare: the kernel default limit for processes system-wide is 32K).
Fixes#2388
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
This new setting configures the TasksMax= field for the slice objects we
create for each user.
This alters logind to create the slice unit as transient unit explicitly
instead of relying on implicit generation of slice units by simply
starting them. This also enables us to set a friendly description for
slice units that way.
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
The following functions return immediately if a null pointer was passed.
* calendar_spec_free
* link_address_free
* manager_free
* sd_bus_unref
* sd_journal_close
* udev_monitor_unref
* udev_unref
It is therefore not needed that a function caller repeats a corresponding check.
This issue was fixed by using the software Coccinelle 1.0.1.
Use mfree() where we can.
Drop unnecessary {}.
Drop unnecessary variable declarations.
Cast syscall invocations where explicitly don't care for the return
value to (void).
Reword a comment.
Lennart Poettering