This makes users can configure DHCPv4 client with ClientIdentifier=duid-only.
If set so, then DHCP client sends only DUID as the client identifier.
This may not be RFC compliant, but some setups require this.
Closes#7828.
We maintain a queue of units and jobs that we are supposed to generate
change/new notifications for because they were either just created or
some of their property has changed. Let's throttle processing of this
queue a bit: as soon as > 1K of bus messages are queued for writing
let's skip processing the queue, and then recheck on the next
iteration again.
Moreover, never process more than 100 units in one go, return to the
event loop after that. Both limits together should put effective limits
on both space and time usage of the function, delaying further
operations until a later moment, when the queue is empty or the the
event loop is sufficiently idle again.
This should keep the number of generated messages much lower than
before on busy systems or where some client is hanging.
Note that this also means a bad client can slow down message dispatching
substantially for up to 90s if it likes to, for all clients. But that
should be acceptable as we only allow trusted bus clients, anyway.
Fixes: #8166
It is often the case that a file descriptor and its corresponding IO
sd_event_source share a life span. When this is the case, developers will
have to unref the event source and close the file descriptor. Instead, we
can just have the event source take ownership of the file descriptor and
close it when the event source is freed. This is especially useful when
combined with cleanup attributes and sd_event_source_unrefp().
This patch adds two new public functions:
sd_event_source_get_io_fd_own()
sd_event_source_set_io_fd_own()
The time-related functions in sd-event.h take as inputs constants (CLOCK_*)
defined in time.h. By including time.h in sd-event.h, we free the developer
from having to do this manually.
Currently, sd-bus supports the ability to have thread-local default busses.
However, this is less useful than it can be since all functions which
require an sd_bus* as input require the caller to pass it. This patch adds
a new macro which allows the developer to pass a constant SD_BUS_DEFAULT,
SD_BUS_DEFAULT_USER or SD_BUS_DEFAULT_SYSTEM instead. This reduces work for
the caller.
For example:
r = sd_bus_default(&bus);
r = sd_bus_call_method(bus, ...);
sd_bus_unref(bus);
Becomes:
r = sd_bus_call_method(SD_BUS_DEFAULT, ...);
If the specified thread-local default bus does not exist, the function
calls will return -ENOPKG. No bus will ever be implicitly created.
Currently, sd-event supports the ability to have a thread-local default
event loop. However, this is less useful than it can be since all functions
which require an sd_event* as input require the caller to pass it. This
patch adds a new macro which allows the developer to pass a constant
SD_EVENT_DEFAULT instead. This reduces work for the caller.
For example:
r = sd_event_default(&e);
r = sd_event_add_io(e, ...);
sd_event_unref(e);
Becomes:
r = sd_event_add_io(SD_EVENT_DEFAULT, ...);
If no thread-local default event loop exists, the function calls will
return -ENOPKG. No event loop will ever be implicitly created.
This also adds the ability to incorporate arrays into netlink messages
and to determine when a netlink message is too big, used by some generic
netlink protocols.
This is useful on direct connections to generate messages with valid
sender fields.
This is particularly useful for services that are accessible both
through direct connections and the broker, as it allows clients to
install matches on the sender service name, and they work the same in
both cases.
The changes both networkd and resolved to make use of the watch_bind
feature of sd-bus to connect to the system bus. This way, both daemons
can be started during early boot, and automatically and instantly
connect to the system bus as it becomes available.
This replaces prior code that used a time-based retry logic to connect
to the bus.
This new call is much light sd_bus_is_open(), but returns true only if
the connection is fully set up, i.e. after we finished with the
authentication and Hello() phase. This API is useful for clients in
particular when using the "watch_bind" feature, as that way it can be
determined in advance whether it makes sense to sync on some operation.
These are convenience helpers that hide the match string logic (which we
probably should never have exposed), and instead just takes regular C
arguments.
We usually enqueue a number of these calls on each service
initialization. Let's do this asynchronously, and thus remove
synchronization points. This improves both performance behaviour and
reduces the chances to deadlock.
They do the same thing as their synchronous counterparts, but only
enqueue the operation, thus removing synchronization points during
service initialization.
If the callback function is passed as NULL we'll fallback to generic
implementations of the reply handlers, that terminate the connection if
the requested name cannot be acquired, under the assumption that not
being able to acquire the name is a technical problem.
This adds a "watch-bind" feature to sd-bus connections. If set and the
AF_UNIX socket we are connecting to doesn't exist yet, we'll establish
an inotify watch instead, and wait for the socket to appear. In other
words, a missing AF_UNIX just makes connecting slower.
This is useful for daemons such as networkd or resolved that shall be
able to run during early-boot, before dbus-daemon is up, and want to
connect to dbus-daemon as soon as it becomes ready.
As DHCPv6 leases may expire at some point, the delegated prefixes
have to be removed. Add a prefix removal function to the Router
Advertisement handling code.
Add a boolean that indicates whether the prefixes will always exist
or if they will time out after the assigned valid lifetime. In the
latter case calculate the expiry times for both preferred and valid
lifetimes for the prefixes, and decrease the remaining lifetimes
each time when a Router Advertisement is sent.
Should the prefix be updated, re-calculate the prefix lifetime. When
updating, update the existing entry, if any, with the lifetimes of
the added entry as the existing entry has its lifetimes set
according to its previously calculated expiry times.
Dec 14 14:10:54 krowka systemd[1]: System is tainted: overflowgid-not-65534
-- Subject: The system is configured in a way that might cause problems
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- The following "tags" are possible:
-- - "split-usr" — /usr is a separate file system and was not mounted when systemd
-- was booted
-- - "cgroups-missing" — the kernel was compiled without cgroup support or access
-- to expected interface files is resticted
-- - "var-run-bad" — /var/run is not a symlink to /run
-- - "overflowuid-not-65534" — the kernel user ID used for "unknown" users (with
-- NFS or user namespaces) is not 65534
-- - "overflowgid-not-65534" — the kernel group ID used for "unknown" users (with
-- NFS or user namespaces) is not 65534
-- Current system is tagged as overflowgid-not-65534.
RequiredForOnline= denotes a link/network that does/does not require being up
for systemd-networkd-wait-online to consider the system online; this makes it
possible to ignore devices without modifying parameters to wait-online.
Currenly the only way to remove fds from the fdstore is to fully
stop the service, or to somehow trigger POLLERR/POLLHUP on the fd, in
which case systemd will remove the fd automatically.
Let's add another way: a new message that can be sent to remove fds
explicitly, given their name.
Of course, it's not really a valid sd_notify() message if multiple of
these fields are used in one, but let's handle this somewhat gracefully,
by only processing one of them, and ignoring the rest.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
Implement DHCPv6 option to exchange information about the Fully
Qualified Domain Name (FQDN) according to RFC 4704.
The RFC 4704 describes two models of operations in section 3,
currently only the second model is supported (DHCPv6 server
updates both the AAAA and the PTR RRs).
The existing DHCP Section Options SendHostname and Hostname are
sent as FQDN to the server. According to section 4.2 sending
only parts of its FQDN is allowed.
Fixes#4682.
When EmitDNS or EmitDomains is set, automatically look up values
for Router Advertisement DNS and DNS search domain options starting
with the values in the IPv6PrefixDelegationsection, if any. If none
are found, use the values set for the network, and as a last resort
try with the preferred upstream network.
The default DNS lifetime and therefore Router Advertisement interval
is added to the public sd_radv.h header as the DNS lifetime depends
on the maximum advertisement interval.
This adds a new recognizable log message for each unit invocation that
contains structured information about consumed resources of the unit as
a whole after it terminated. This is particular useful for apps that
want to figure out what the resource consumption of a unit given a
specific invocation ID was.
The log message is only generated for units that have at least one
XyzAccounting= property turned on, and currently only covers IP traffic and CPU
time metrics.
Add Router Advertisement DNS Search List option as specified
in RFC 8106. The search list option uses and identical option
header as the RDNSS option and therefore the option header
structure can be reused.
If systemd is compiled with IDNA support, internationalization
of the provided search domain is applied, after which the search
list is written in wire format into the DNSSL option.
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
This adds a per-service restart counter. Each time an automatic
restart is scheduled (due to Restart=) it is increased by one. Its
current value is exposed over the bus as NRestarts=. It is also logged
(in a structured, recognizable way) on each restart.
Note that this really only counts automatic starts triggered by Restart=
(which it nicely complements). Manual restarts will reset the counter,
as will explicit calls to "systemctl reset-failed". It's supposed to be
a tool for measure the automatic restart feature, and nothing else.
Fixes: #4126
Define Router Advertisement prefix structure. Add the Prefix
Information ICMPv6 option defined in RFC 4861 to the prefix
information structure, as it will simplify sending a Prefix
Information option later on. In order to handle endianness
correctly, the structure is redefined here instead of using
the one in netinet/icmp6.h.
Add functions to create and modify prefix information and set
default values as defined in RFC 4861, Section 6.2.1.
This adds a meson test because it fits nicely into the existing framework.
It should be enough to run this test once in a while, so I don't think it's
crucial to also have it under autotools.
This adds a modified version of dhcp6_option_parse_domainname() that is
able to parse compressed domain names, borrowing the idea from
dns_packet_read_name(). It also adds pieces in networkd-link and
networkd-manager to properly save/load the added option field.
Resolves#2710.
