See https://bugzilla.redhat.com/show_bug.cgi?id=1763488: when we say that
'foo@*.service' is not a valid unit name, this is not clear enough. Let's
include the name of the operation that does not support globbing in the
error message:
$ build/systemctl enable 'foo@*.service'
Glob pattern passed to enable, but globs are not supported for this.
Invalid unit name "foo@*.service" escaped as "foo@\x2a.service".
...
chase_symlinks() would return negative on error, and either a non-negative status
or a non-negative fd when CHASE_OPEN was given. This made the interface quite
complicated, because dependning on the flags used, we would get two different
"types" of return object. Coverity was always confused by this, and flagged
every use of chase_symlinks() without CHASE_OPEN as a resource leak (because it
would this that an fd is returned). This patch uses a saparate output parameter,
so there is no confusion.
(I think it is OK to have functions which return either an error or an fd. It's
only returning *either* an fd or a non-fd that is confusing.)
When the .automount unit file already existed for any reason in the
`normal-dir` passed to `systemd-fstab-generator`, but the normal .mount unit
file did not, `f` was closed (but _not_ set to NULL). The call to
`generator_open_unit_file(..., automount_name, &f)` then failed because the
.mount unit file already existed. Now `f` did not point to an open FILE and the
later cleanup from the `_cleanup_fclose_` attribute failed with a double free.
Reset `f` to NULL before reusing it.
This is partially a refactoring, but also makes many more places use
unlocked operations implicitly, i.e. all users of fopen_temporary().
AFAICT, the uses are always for short-lived files which are not shared
externally, and are just used within the same context. Locking is not
necessary.
Otherwise we can end up with an ordering cycle. Since d54bab90, all
local mounts now gain a default `Before=local-fs.target` dependency.
This doesn't make sense for `/sysroot` mounts in the initrd though,
since those happen later in the boot process.
Closes: #12231
Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab,
and possibly masking this condition if it should be enabled for auto gpt stuff,
just pull it in explicitly when required.
It would work when the generator was run by systemd, since generators
are always started in "/", but when running the generator for debugging
purposes the result would be ... different.
There should be no functional difference, except that the error message
is changd from "three or no arguments" to "zero or three arguments". Somehow
the inverted form always seemed strange.
umask() call is also dropped from run-generator. I think it wasn't dropped in
053254e3cb because the run generator was merged
around the same time.
Ideally, coccinelle would strip unnecessary braces too. But I do not see any
option in coccinelle for this, so instead, I edited the patch text using
search&replace to remove the braces. Unfortunately this is not fully automatic,
in particular it didn't deal well with if-else-if-else blocks and ifdefs, so
there is an increased likelikehood be some bugs in such spots.
I also removed part of the patch that coccinelle generated for udev, where we
returns -1 for failure. This should be fixed independently.
systemd already sets the umask (see e3b8d0637d). When
running under systemd, we don't need to set it. And when *not* running under
systemd, for example during development, there is no reason to override the user
config. Let's just drop those calls.
$ git grep -e 'umask\(' -l 'src/*generator*' |xargs perl -i -0pe 's|^[^\n]*umask\([^\n]+\n\n||gms'
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
The function is similar to path_kill_slashes() but also removes
initial './', trailing '/.', and '/./' in the path.
When the second argument of path_simplify() is false, then it
behaves as the same as path_kill_slashes(). Hence, this also
replaces path_kill_slashes() with path_simplify().
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
The warning is not emitted for absolute paths like /dev/sda or /home, which are
converted to .device and .mount unit names without any fuss.
Most of the time it's unlikely that users use invalid unit names on purpose,
so let's warn them. Warnings are silenced when --quiet is used.
$ build/systemctl show -p Id hello@foo-bar/baz
Invalid unit name "hello@foo-bar/baz" was escaped as "hello@foo-bar-baz" (maybe you should use systemd-escape?)
Id=hello@foo-bar-baz.service
$ build/systemd-run --user --slice foo-bar/baz --unit foo-bar/foo true
Invalid unit name "foo-bar/foo" was escaped as "foo-bar-foo" (maybe you should use systemd-escape?)
Invalid unit name "foo-bar/baz" was escaped as "foo-bar-baz" (maybe you should use systemd-escape?)
Running as unit: foo-bar-foo.service
Fixes#8302.
This removes LOG_TARGET_SAFE. It's made redundant by the new
"prohibit-ipc" logging flag, as it used to have a similar effect: avoid
logging to the journal/syslog, i.e. any local services in order to avoid
deadlocks when we lock from PID 1 or its utility processes (such as
generators).
All previous users of LOG_TARGET_SAFE are switched over to the new
setting. This makes things a bit safer for all, as not even the
SYSTEMD_LOG_TARGET env var can be used to accidentally log to the
journal anymore in these programs.
Let's replace usage of fputc_unlocked() and friends by __fsetlocking(f,
FSETLOCKING_BYCALLER). This turns off locking for the entire FILE*,
instead of doing individual per-call decision whether to use normal
calls or _unlocked() calls.
This has various benefits:
1. It's easier to read and easier not to forget
2. It's more comprehensive, as fprintf() and friends are covered too
(as these functions have no _unlocked() counterpart)
3. Philosophically, it's a bit more correct, because it's more a
property of the file handle really whether we ever pass it on to another
thread, not of the operations we then apply to it.
This patch reworks all pieces of codes that so far used fxyz_unlocked()
calls to use __fsetlocking() instead. It also reworks all places that
use open_memstream(), i.e. use stdio FILE* for string manipulations.
Note that this in some way a revert of 4b61c87511.
I opted to completely generate a unit for both mount points and swaps. For
swaps, it would be possible to use fixed template unit like systemd-mkswap@.service,
because there's no information passed except the device name. For mount points,
that's not possible because both the device name and file system type need to
be passed. Nevertheless, I expect that options will need to passed to both mkfs
and mkswap, in which case it'll be necessary to create units of both types
anyway.
Let's always escape strings we receive from the user before writing them
out to unit file settings that suppor specifier expansion, so that user
strings are transported as-is.
As a follow-up for db3f45e2d2 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
In case fstab-generator is called in the initrd, chase_symlinks()
returns with a canonical path "/sysroot/sysroot/<mountpoint>", if the
"/sysroot" prefix is present in the path.
This patch skips the "/sysroot" prefix for the chase_symlinks() call,
because "/sysroot" is already the root directory and chase_symlinks()
prepends the root directory in the canonical path returned.
This has a long history; see see 5261ba9018
which originally introduced the behavior. Unfortunately that commit
doesn't include any rationale, but IIRC the basic issue is that
systemd wants to model the real mount state as units, and symlinks
make canonicalization much more difficult.
At the same time, on a RHEL6 system (upstart), one can make e.g. `/home` a
symlink, and things work as well as they always did; but one doesn't have
access to the sophistication of mount units (dependencies, introspection, etc.)
Supporting symlinks here will hence make it easier for people to do upgrades to
RHEL7 and beyond.
The `/home` as symlink case also appears prominently for OSTree; see
https://ostree.readthedocs.io/en/latest/manual/adapting-existing/
Further work has landed in the nspawn case for this; see e.g.
d944dc9553
A basic limitation with doing this in the fstab generator (and that I hit while
doing some testing) is that we obviously can't chase symlinks into mounts,
since the generator runs early before mounts. Or at least - doing so would
require multiple passes over the fstab data (as well as looking at existing
mount units), and potentially doing multi-phase generation. I'm not sure it's
worth doing that without a real world use case. For now, this will fix at least
the OSTree + `/home` <https://bugzilla.redhat.com/show_bug.cgi?id=1382873> case
mentioned above, and in general anyone who for whatever reason has symlinks in
their `/etc/fstab`.
When "bg" is specified for NFS mounts, and if the server is
not accessible, two behaviors are possible depending on networking
details.
If a definitive error is received, such a EHOSTUNREACH or ECONNREFUSED,
mount.nfs will fork and continue in the background, while /bin/mount
will report success.
If no definitive error is reported but the connection times out
instead, then the mount.nfs timeout will normally be longer than the
systemd.mount timeout, so mount.nfs will be killed by systemd.
In the first case the mount has appeared to succeed even though
it hasn't. This can be confusing. Also the background mount.nfs
will never get cleaned up, even if the mount unit is stopped.
In the second case, mount.nfs is killed early and so the mount will
not complete when the server comes back.
Neither of these are ideal.
This patch modifies the options when an NFS bg mount is detected to
force an "fg" mount, but retain the default "retry" time of 10000
minutes that applies to "bg" mounts.
It also imposes "nofail" behaviour and sets the TimeoutSec for the
mount to "infinity" so the retry= time is allowed to complete.
This provides near-identical behaviour to an NFS bg mount started directly
by "mount -a". The only difference is that systemd will not wait for
the first mount attempt, while "mount -a" will.
Fixes#6046
This extends 2d79a0bbb9 to the kernel
command line parsing.
The parsing is changed a bit to only understand "0" as infinity. If units are
specified, parse normally, e.g. "0s" is just 0. This makes it possible to
provide a zero timeout if necessary.
Simple test is added.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1462378.