The parsing of the dhcpv4 lease lifetime, as well as the t1/t2
times, is simplified by this commit.
This differs from previous behavior; previously, the lease lifetime and
t1/t2 values were modified by random 'fuzz' by subtracting 3, then adding
a random number between 0 and (slightly over) 2 seconds. The resulting
values were therefore always between 1-3 seconds shorter than the value
provided by the server (or the default, in case of t1/t2). Now, as
described in RFC2131, the random 'fuzz' is between -1 and +1 seconds,
meaning the actual t1 and t2 value will be up to 1 second earlier or
later than the server-provided (or default) t1/t2 value.
This also differs in handling the lease lifetime, as described above it
previously was adjusted by the random 'fuzz', but the RFC does not state
that the lease expiration time should be adjusted, so now the code uses
exactly the lease lifetime as provided by the server with no adjustment.
RFC2131, providing the details for dhcpv4, has specific retransmission
intervals that it outlines. This adds functions to compute the timeouts
as the RFC describes.
So far we only reported major state transitions like failure to acquire
the message. Let's report the initial failure after a few timeouts in
a new event type.
The number of timeouts is hardcoded as 3, since Windows seems to be using
that. I don't think we need to make this configurable out of the box. A
reasonable default may be enough.
Devices with multicast but without mac addresses i.e. tun devices
are not getting setuped correctly:
$ ip tuntap add mode tun dev tun0
$ ip addr show tun0
16: tun0: <NO-CARRIER,POINTOPOINT,MULTICAST,NOARP,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 500
link/none
$ cat /etc/systemd/network/tun0.network
[Match]
Name = tun0
[Network]
Address=192.168.1.1/32
$ ./systemd-networkd
tun0: DHCP6 CLIENT: Failed to set identifier: Invalid argument
tun0: Failed
With these patches applied, networkd is successfully able to get an
address from a DHCP server on an IPoIB interface.
1)
Makes networkd pass the actual interface type to the dhcp client,
instead of hardcoding it to Ethernet.
2)
Fixes some issues in handling the larger (20 Byte) IB MAC addresses in
the dhcp code.
3)
Add a new field to networkds Link struct, which holds the interface
broadcast address.
3.1)
Modify the DHCP code to also expect the broadcast address as parameter.
On an Ethernet-Interface the Broadcast address never changes and is always
all 6 bytes set to 0xFF.
On an IB one however it is not neccesarily always the same, thus
fetching the actual address from the interface is neccesary.
4)
Only the last 8 bytes of an IB MAC are stable, so when using an IB MAC to
generate a client ID, only pass those 8 bytes.
This effectively reverts the commit 22fc2420b2.
The function `asynchronous_close()` confuses valgrind. Before this commit,
valgrind may report the following:
```
HEAP SUMMARY:
in use at exit: 384 bytes in 1 blocks
total heap usage: 4,787 allocs, 4,786 frees, 1,379,191 bytes allocated
384 bytes in 1 blocks are possibly lost in loss record 1 of 1
at 0x483CAE9: calloc (vg_replace_malloc.c:760)
by 0x401456A: _dl_allocate_tls (in /usr/lib64/ld-2.31.so)
by 0x4BD212E: pthread_create@@GLIBC_2.2.5 (in /usr/lib64/libpthread-2.31.so)
by 0x499B662: asynchronous_job (async.c:47)
by 0x499B7DC: asynchronous_close (async.c:102)
by 0x4CFA8B: client_initialize (sd-dhcp-client.c:696)
by 0x4CFC5E: client_stop (sd-dhcp-client.c:725)
by 0x4D4589: sd_dhcp_client_stop (sd-dhcp-client.c:2134)
by 0x493C2F: link_stop_clients (networkd-link.c:620)
by 0x4126DB: manager_free (networkd-manager.c:867)
by 0x40D193: manager_freep (networkd-manager.h:97)
by 0x40DAFC: run (networkd.c:20)
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 384 bytes in 1 blocks
still reachable: 0 bytes in 0 blocks
suppressed: 0 bytes in 0 blocks
For lists of detected and suppressed errors, rerun with: -s
ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
```
SD_DHCP6_OPTION_IA_NA does not exist in DHCP6_ADVERTISE packet if DHCP server only provides prefix delegation. So the attempt to send the DHCP6_REQUEST packet fails on r = dhcp6_option_append_ia(&opt, &optlen, &client->lease->ia); forever.
Similar to free_and_replace. I think this should be uppercase to make it
clear that this is a macro. free_and_replace should probably be uppercased
too.
This really doesn't matter given that AF_xyz and PF_xyz are equivalent
in all ways, but we almost always use AF_xyz, hence stick to it
universally and convert the remaining PF_ to AF_
