When enabled, three samples are used to determine the value of a
received bit by majority rule.
This patch adds support for the TripleSampling= option in the [CAN]
section of .network files.
And before resolving NetDev names, check conditions in .network,
and if they do not match the system environment, drop the network
unit earlier.
Fixes#4211.
We were already using OrderedSets in the manager object, but strvs in the
configuration parsing code. Using sets gives us better scaling when many
domains are used.
In oss-fuzz #13059 the attached reproducer takes approximately 30.5 s to be
parsed. Converting to sets makes this go down to 10s. This is not _vastly_
faster, but using sets seems like a nicer approach anyway. In particular, we
avoid the quadratic de-unification operation after each addition.
When there is bad link in the network the carrier goes up/down.
This makes networkd stops all the clients and drop config.
But if the remote router/dhcpserver running a prevention
of DHCP Starvation attack or DHCP Flood attack it does not allow
networkd to take a DHCP lease resulting failure in configuration.
This patch allows to keep the client running and keep the conf
also for this scenario.
Closes#9111
An earlier commit 0e408b82b (dhcp6-client: handle IAID with value zero)
introduced a flag to sd_dhcp6_client to distinguish between an unset
IAID and a value set to zero.
However, that was not sufficient and broke leaving the setting
uninitialized in networkd configuration. The configuration parsing
also must distinguish between the default, unset value and an
explict zero configuration.
Fixes: 0e408b82b8
When using networkd we currently have no way of ensuring that static
neighbor entries are set when our link comes up. This change adds a new
section to the network definition that allows multiple static neighbors
to be set on a link.
RFC 7084, WPD-4, requires Customer Edge end routers to behave
according to the following:
"WPD-4: By default, the IPv6 CE router MUST initiate DHCPv6 prefix
delegation when either the M or O flags are set to 1 in a
received Router Advertisement (RA) message. Behavior of the
CE router to use DHCPv6 prefix delegation when the CE router
has not received any RA or received an RA with the M and the
O bits set to zero is out of scope for this document."
Since it cannot be automatically detected whether DHCPv6 is to be
operated as an CE end router or whether to initiate an Informational
exchange to obtain other useful network information via DHCPv6 when the
Router Advertisement 'O' bit is set, a 'ForceDHCPv6PDOtherInformation'
boolean network configuration option in the '[DHCP]' section of a is
introduced. Setting this option causes DHCPv6 to be started in stateful
mode, although only the 'O' bit is seen in the Router Advertisement.
When 'ForceDHCPv6PDOtherInformation' is set and the Router Advertisement
has only the Other information 'O' bit set, disable requests for IA_NA
addresses.
Fixes#9745.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This makes most header files easier to look at. Also Emacs gets really
slow when browsing through large sections of overly long prototypes,
which is much improved by this macro.
We should probably not do something similar with too many other cases,
as macros like this might help readability for some, but make it worse
for others. But I think given the complexity of this specific prototype
and how often we use it, it's worth doing.
This patch add support to enables to send User Class option code 77
RFC 3004.
This option MAY carry multiple User Classes.
The format of this option is as follows:
Code Len Value
+-----+-----+--------------------- . . . --+
| 77 | N | User Class Data ('Len' octets) |
+-----+-----+--------------------- . . . --+
where Value consists of one or more instances of User Class Data.
Each instance of User Class Data is formatted as follows:
UC_Len_i User_Class_Data_i
+--------+------------------------ . . . --+
| L_i | Opaque-Data ('UC_Len_i' octets) |
+--------+------------------------ . . . --+
UserClass=
A DHCPv4 client can use UserClass option to identify the type or category of user or applications
it represents. The information contained in this option is an string that represents the user class
of which the client is a member. Each class sets an identifying string of information to be used by the DHCP service to classify clients. Takes a whitespace-separated list.
UserClass= hello world how are you
Closes: RFC: #5134
Rather than choosing to set or unset any of these flag
use kernel defaults. This patch makes following properties to unset.
UseBPDU = unset
HairPin = unset
FastLeave = unset
AllowPortToBeRoot = unset
UnicastFlood = unset
