Commit graph

28 commits

Author SHA1 Message Date
David Anderson d067cab35c networkd: support 6rd tunnel netdev setup. 2018-11-09 17:56:33 -08:00
Tobias Jungel db688b7e55 networkd: cleanup for #10542
fixes: 53b1f7d
2018-11-06 16:42:12 +03:00
Yu Watanabe 6f1a96ded4 netdev: also support GENEVE.UDP6ZeroChecksum{Tx,Rx}=
After 53c06862c1, we prefer Checksum
instead of CheckSum. Let's do so for GENEVE netdev.
2018-11-04 00:31:46 +09:00
Tobias Jungel 99f68ef02d networkd: add missing bonding options (#10542)
Add support for bonding options system prio, port key and actor system mac.

These options exist in the linux kernel since 4.2
(torvalds/linux@171a42c38c)

Details:
https://www.kernel.org/doc/Documentation/networking/bonding.txt
2018-11-02 10:31:20 +09:00
Susant Sahani 53cb501a13 networkd and sd-netlink: add support for Generic netlink And FooOverUDP to IPIP tunnel
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/

networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/

Example conf:

/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou

[FooOverUDP]
Port=5555
Protocol=4

```

/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip

[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```

$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
    ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
2018-08-23 11:30:37 +02:00
Yu Watanabe 40352cf0c1 netdev: fix parser for VRF.Table=
This effectively reverts f98dd1e707 (#6704).

Fixes #9150.
2018-06-02 11:15:37 +02:00
Lennart Poettering 4e964aa05c networkd,udev: clean up MTU handling
This cleans up handling of MTU values across the codebase. Previously
MTU values where stored sometimes in uint32_t, sometimes in uint16_t,
sometimes unsigned and sometimes in size_t. This now unifies this to
uint32_t across the codebase, as that's what netlink spits out, and what
the majority was already using.

Also, all MTU parameters are now parsed with config_parse_mtu() and
config_parse_ipv6_mtu() is dropped as it is now unneeded.

(Note there is one exception for the MTU typing: in the DCHPv4 code we
continue to process the MTU as uint16_t value, as it is encoded like
that in the protocol, and it's probably better stay close to the
protocol there.)
2018-04-26 13:51:44 +02:00
Jörg Thalheim e5719363f5 networkd: add support for wireguard interface type
More information may be found at wireguard.com.
2018-01-09 14:00:49 +01:00
Susant Sahani 3a4f3e423d networkd: Tunnel allows tunnel traffic on ip6tnl devices (#7756)
where the remote endpoint is a local host address.
2017-12-29 23:19:21 +09:00
Lennart Poettering 5022f08a23 core,udev,networkd: add ConditionKernelVersion=
This adds a simple condition/assert/match to the service manager, to
udev's .link handling and to networkd, for matching the kernel version
string.

In this version we only do fnmatch() based globbing, but we might want
to extend that to version comparisons later on, if we like, by slightly
extending the syntax with ">=", "<=", ">", "<" and "==" expressions.
2017-12-26 17:39:44 +01:00
Susant Sahani d384826f69 networkd: Add support for ipvlan L3s and flags (#7726)
This works supports to configure L3S mode and flags
such as bridge, private and vepa
2017-12-23 18:55:03 +01:00
Susant Sahani d6df583c87 networkd: introduce vxcan netdev. (#7150)
Similar to the virtual ethernet driver veth, vxcan implements a
local CAN traffic tunnel between two virtual CAN network devices.
When creating a vxcan, two vxcan devices are created as pair
When one end receives the packet it appears on its pair and vice
versa. The vxcan can be used for cross namespace communication.
2017-11-22 08:23:22 +01:00
Shawn Landden 4831981d89 tree-wide: adjust fall through comments so that gcc is happy
Distcc removes comments, making the comment silencing
not work.

I know there was a decision against a macro in commit
ec251fe7d5
2017-11-20 13:06:25 -08:00
b1tninja c4819961b1 Allow configuration of a bridge netdev's group_fwd_mask. (#6759) 2017-09-08 12:36:06 +02:00
Susant Sahani 4d7fa6de3b networkd: Allow tunnels to be created without .network (#6701)
Now we don't support tunnels to be created without a .network file
that is we need a interface index.

This work allows tunnel to be created without a ifindex.

Closes #6695
2017-08-31 18:51:03 +02:00
Andreas Rammhold b13049c765 networkd: Added deprecation warning to VRF.TableId 2017-08-31 12:08:33 +02:00
Andreas Rammhold 62b83cf664 networkd: Renamed table_id field to table
Other parts of the code do just use `table` as identifier for the actual
routing table id. This change should make it easier to read through the
code since the meaning or rather the name stays the same.
2017-08-31 01:14:05 +02:00
Andreas Rammhold f98dd1e707 networkd: Add VRF.Table to support parsing of table names
Previously there was only `VRF.TableId` which only supported numeric
identifiers for routing table. With the additiona of
`config_parse_route_table` also names can be used as identifiers.
2017-08-31 01:11:16 +02:00
Tobias Jungel 0d6c68eba3 network: bridge vlan without PVID (#5899)
this patch makes it possible to configure a vlan aware bridge without the
PVID. To configure no PVID set DefaultPVID=none in the [BridgeVLAN] section.

fixes #5716
2017-05-29 17:20:01 +02:00
Susant Sahani 6c1ff21b00 network: add support for vlan confs(MVRP, reorder header, loose binding) (#5834) 2017-05-09 20:25:11 +02:00
Susant Sahani 9cdf4e3d7d networkd: replace geneve/vxlan port parsing with generic config_parse_ip_port 2017-04-29 22:33:50 +05:30
Susant Sahani 3ded5bbfda networkd: replace geneve parsers with generic config_parse_uint8 2017-04-25 18:46:04 +05:30
Susant Sahani 6598e04641 networkd: Introduce GENEVE netdev
This work enables cration of geneve tunnel
2017-04-25 10:34:15 +05:30
Susant Sahani c8b2118405 networkd: vlan add GVRP support (#5761)
Add support to configure GVRP.

Closes #5760
2017-04-21 11:01:59 +02:00
Susant Sahani d8653945f7 networkd: vxlan support setting IPv6 flow labe
This work adds support for setting the IPv6 flow label for vxlan.

vxlan.netdev

NetDev]
Description=vxlan-test
Name=vxlan1
Kind=vxlan

[VXLAN]
Id=33
Local=2405:204:920b:29ac:7e7a:91ff:fe6d:ffe2
Remote=FF02:0:0:0:0:0:1:9
FlowLabel=104
ip -d link show vxlan1

8: vxlan1: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether be:83:aa:db:6b:cb brd ff:ff:ff:ff:ff:ff promiscuity 0
    vxlan id 33 group ff02::1:9 local 2405:204:920b:29ac:7e7a:91ff:fe6d:ffe2 dev enp0s25 srcport 0 0 dstport 8472 flowlabel 0x68 ageing 300 noudpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode eui64 numtxqueues 1 numrxqueues 1
2017-03-14 10:11:49 +05:30
Susant Sahani d35e5d3763 networkd: add support for vxlan Remote and Local.
This patch add supports to configure IFLA_VXLAN_LOCAL
and IFLA_VXLAN_GROUP.

The "Group" is renamed to "Remote" which is a multicast address.`

```
Description=vxlan-test
Name=vxlan1
Kind=vxlan

[VXLAN]
Id=33
Local=2001:db8:2f4:4bff:fa71:1a56
Remote=FF02:0:0:0:0:0:1:9
```

output
```
ip -d link show vxlan1
16: vxlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether fe:b4:97:03:f8:e5 brd ff:ff:ff:ff:ff:ff promiscuity 0
    vxlan id 33 group ff02::1:9 local 2001:db8:02f4:4bff:fa71:1a56 dev enp0s3 srcport 0 0 dstport 8472 ageing 300 noudpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode none numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535

```
2017-02-25 00:31:47 +05:30
Susant Sahani 7dd6974c46 networkd: vxlan rename ARPProxy to ReduceARPProxy (#4891)
Fixes: #4768
2016-12-21 18:59:15 +01:00
Tom Gundersen 441e9ae4d9 networkd: netdev - move to separate subdirectory
This could (and should) be made into a separate daemon, at least move
the sourcefiles out for now.
2016-11-13 05:16:49 +01:00
Renamed from src/network/networkd-netdev-gperf.gperf (Browse further)