ISO-C doesn't allow empty initializers, so replace it by explicitly
initializing to zero.
Also add braces because x is a union and we initialize a subobject, so
a compiler might warn about suggesting braces. Shut that up.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
sd_bus_open/sd_bus_open_system/sd_bus_open_user are convenient, but
don't allow the description to be set. After they return, the bus is
is already started, and sd_bus_set_description() fails with -EBUSY.
It would be possible to allow sd_bus_set_description() to update the
description "live", but messages are already emitted from sd_bus_open
functions, so it's better to allow the description to be set in
sd_bus_open/sd_bus_open_system/sd_bus_open_user.
Fixes message like:
Bus n/a: changing state UNSET → OPENING
This makes users can configure DHCPv4 client with ClientIdentifier=duid-only.
If set so, then DHCP client sends only DUID as the client identifier.
This may not be RFC compliant, but some setups require this.
Closes#7828.
We maintain a queue of units and jobs that we are supposed to generate
change/new notifications for because they were either just created or
some of their property has changed. Let's throttle processing of this
queue a bit: as soon as > 1K of bus messages are queued for writing
let's skip processing the queue, and then recheck on the next
iteration again.
Moreover, never process more than 100 units in one go, return to the
event loop after that. Both limits together should put effective limits
on both space and time usage of the function, delaying further
operations until a later moment, when the queue is empty or the the
event loop is sufficiently idle again.
This should keep the number of generated messages much lower than
before on busy systems or where some client is hanging.
Note that this also means a bad client can slow down message dispatching
substantially for up to 90s if it likes to, for all clients. But that
should be acceptable as we only allow trusted bus clients, anyway.
Fixes: #8166
It is often the case that a file descriptor and its corresponding IO
sd_event_source share a life span. When this is the case, developers will
have to unref the event source and close the file descriptor. Instead, we
can just have the event source take ownership of the file descriptor and
close it when the event source is freed. This is especially useful when
combined with cleanup attributes and sd_event_source_unrefp().
This patch adds two new public functions:
sd_event_source_get_io_fd_own()
sd_event_source_set_io_fd_own()
The time-related functions in sd-event.h take as inputs constants (CLOCK_*)
defined in time.h. By including time.h in sd-event.h, we free the developer
from having to do this manually.
Currently, sd-bus supports the ability to have thread-local default busses.
However, this is less useful than it can be since all functions which
require an sd_bus* as input require the caller to pass it. This patch adds
a new macro which allows the developer to pass a constant SD_BUS_DEFAULT,
SD_BUS_DEFAULT_USER or SD_BUS_DEFAULT_SYSTEM instead. This reduces work for
the caller.
For example:
r = sd_bus_default(&bus);
r = sd_bus_call_method(bus, ...);
sd_bus_unref(bus);
Becomes:
r = sd_bus_call_method(SD_BUS_DEFAULT, ...);
If the specified thread-local default bus does not exist, the function
calls will return -ENOPKG. No bus will ever be implicitly created.
Currently, sd-event supports the ability to have a thread-local default
event loop. However, this is less useful than it can be since all functions
which require an sd_event* as input require the caller to pass it. This
patch adds a new macro which allows the developer to pass a constant
SD_EVENT_DEFAULT instead. This reduces work for the caller.
For example:
r = sd_event_default(&e);
r = sd_event_add_io(e, ...);
sd_event_unref(e);
Becomes:
r = sd_event_add_io(SD_EVENT_DEFAULT, ...);
If no thread-local default event loop exists, the function calls will
return -ENOPKG. No event loop will ever be implicitly created.
This also adds the ability to incorporate arrays into netlink messages
and to determine when a netlink message is too big, used by some generic
netlink protocols.
This is useful on direct connections to generate messages with valid
sender fields.
This is particularly useful for services that are accessible both
through direct connections and the broker, as it allows clients to
install matches on the sender service name, and they work the same in
both cases.
The changes both networkd and resolved to make use of the watch_bind
feature of sd-bus to connect to the system bus. This way, both daemons
can be started during early boot, and automatically and instantly
connect to the system bus as it becomes available.
This replaces prior code that used a time-based retry logic to connect
to the bus.
This new call is much light sd_bus_is_open(), but returns true only if
the connection is fully set up, i.e. after we finished with the
authentication and Hello() phase. This API is useful for clients in
particular when using the "watch_bind" feature, as that way it can be
determined in advance whether it makes sense to sync on some operation.
These are convenience helpers that hide the match string logic (which we
probably should never have exposed), and instead just takes regular C
arguments.
We usually enqueue a number of these calls on each service
initialization. Let's do this asynchronously, and thus remove
synchronization points. This improves both performance behaviour and
reduces the chances to deadlock.
They do the same thing as their synchronous counterparts, but only
enqueue the operation, thus removing synchronization points during
service initialization.
If the callback function is passed as NULL we'll fallback to generic
implementations of the reply handlers, that terminate the connection if
the requested name cannot be acquired, under the assumption that not
being able to acquire the name is a technical problem.
This adds a "watch-bind" feature to sd-bus connections. If set and the
AF_UNIX socket we are connecting to doesn't exist yet, we'll establish
an inotify watch instead, and wait for the socket to appear. In other
words, a missing AF_UNIX just makes connecting slower.
This is useful for daemons such as networkd or resolved that shall be
able to run during early-boot, before dbus-daemon is up, and want to
connect to dbus-daemon as soon as it becomes ready.
As DHCPv6 leases may expire at some point, the delegated prefixes
have to be removed. Add a prefix removal function to the Router
Advertisement handling code.
Add a boolean that indicates whether the prefixes will always exist
or if they will time out after the assigned valid lifetime. In the
latter case calculate the expiry times for both preferred and valid
lifetimes for the prefixes, and decrease the remaining lifetimes
each time when a Router Advertisement is sent.
Should the prefix be updated, re-calculate the prefix lifetime. When
updating, update the existing entry, if any, with the lifetimes of
the added entry as the existing entry has its lifetimes set
according to its previously calculated expiry times.
Dec 14 14:10:54 krowka systemd[1]: System is tainted: overflowgid-not-65534
-- Subject: The system is configured in a way that might cause problems
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- The following "tags" are possible:
-- - "split-usr" — /usr is a separate file system and was not mounted when systemd
-- was booted
-- - "cgroups-missing" — the kernel was compiled without cgroup support or access
-- to expected interface files is resticted
-- - "var-run-bad" — /var/run is not a symlink to /run
-- - "overflowuid-not-65534" — the kernel user ID used for "unknown" users (with
-- NFS or user namespaces) is not 65534
-- - "overflowgid-not-65534" — the kernel group ID used for "unknown" users (with
-- NFS or user namespaces) is not 65534
-- Current system is tagged as overflowgid-not-65534.
RequiredForOnline= denotes a link/network that does/does not require being up
for systemd-networkd-wait-online to consider the system online; this makes it
possible to ignore devices without modifying parameters to wait-online.
Currenly the only way to remove fds from the fdstore is to fully
stop the service, or to somehow trigger POLLERR/POLLHUP on the fd, in
which case systemd will remove the fd automatically.
Let's add another way: a new message that can be sent to remove fds
explicitly, given their name.
Of course, it's not really a valid sd_notify() message if multiple of
these fields are used in one, but let's handle this somewhat gracefully,
by only processing one of them, and ignoring the rest.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
Implement DHCPv6 option to exchange information about the Fully
Qualified Domain Name (FQDN) according to RFC 4704.
The RFC 4704 describes two models of operations in section 3,
currently only the second model is supported (DHCPv6 server
updates both the AAAA and the PTR RRs).
The existing DHCP Section Options SendHostname and Hostname are
sent as FQDN to the server. According to section 4.2 sending
only parts of its FQDN is allowed.
Fixes#4682.
When EmitDNS or EmitDomains is set, automatically look up values
for Router Advertisement DNS and DNS search domain options starting
with the values in the IPv6PrefixDelegationsection, if any. If none
are found, use the values set for the network, and as a last resort
try with the preferred upstream network.
The default DNS lifetime and therefore Router Advertisement interval
is added to the public sd_radv.h header as the DNS lifetime depends
on the maximum advertisement interval.
This adds a new recognizable log message for each unit invocation that
contains structured information about consumed resources of the unit as
a whole after it terminated. This is particular useful for apps that
want to figure out what the resource consumption of a unit given a
specific invocation ID was.
The log message is only generated for units that have at least one
XyzAccounting= property turned on, and currently only covers IP traffic and CPU
time metrics.
Add Router Advertisement DNS Search List option as specified
in RFC 8106. The search list option uses and identical option
header as the RDNSS option and therefore the option header
structure can be reused.
If systemd is compiled with IDNA support, internationalization
of the provided search domain is applied, after which the search
list is written in wire format into the DNSSL option.
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
This adds a per-service restart counter. Each time an automatic
restart is scheduled (due to Restart=) it is increased by one. Its
current value is exposed over the bus as NRestarts=. It is also logged
(in a structured, recognizable way) on each restart.
Note that this really only counts automatic starts triggered by Restart=
(which it nicely complements). Manual restarts will reset the counter,
as will explicit calls to "systemctl reset-failed". It's supposed to be
a tool for measure the automatic restart feature, and nothing else.
Fixes: #4126
Define Router Advertisement prefix structure. Add the Prefix
Information ICMPv6 option defined in RFC 4861 to the prefix
information structure, as it will simplify sending a Prefix
Information option later on. In order to handle endianness
correctly, the structure is redefined here instead of using
the one in netinet/icmp6.h.
Add functions to create and modify prefix information and set
default values as defined in RFC 4861, Section 6.2.1.
This adds a meson test because it fits nicely into the existing framework.
It should be enough to run this test once in a while, so I don't think it's
crucial to also have it under autotools.
This adds a modified version of dhcp6_option_parse_domainname() that is
able to parse compressed domain names, borrowing the idea from
dns_packet_read_name(). It also adds pieces in networkd-link and
networkd-manager to properly save/load the added option field.
Resolves#2710.
g++ annoyingly requires a non-empty struct-initializer to initialize all
struct members, in order of declaration.
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Previous checks did nothing, because cc.has_argument only does compilation,
without any linking. Unfortunately cc.links() cannot be used, because it does
not accept any options. Providing the test file as a static source is easiest,
even if not every elegant.
https://github.com/mesonbuild/meson/issues/1676
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This is more-or-less the same as dist-check-includes. meson doesn't exactly
make it easy to call a compiler with a custom set of options. The tests
are included in the test listing.
This is quite messy. I think libtool might have been using something
like -Wl,--whole-archive, but I don't think meson has support for that.
For now, just recompile all the sources for linking into libsystemd
directly. This should not matter much for efficiency, since it's a
few small files.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
After an ipv4ll claimed address conflict occurs a new address needs
to be chosen and then the acquisition state machine needs to be
restarted.
This commit adds a function (sd_ipv4ll_restart) that clears the
previously acquired address (ll->address) and then calls the existing
sd_ipv4ll_start function to choose the new address and start the
acquisition.
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
Embedding sd_id128_t's in constant strings was rather cumbersome. We had
SD_ID128_CONST_STR which returned a const char[], but it had two problems:
- it wasn't possible to statically concatanate this array with a normal string
- gcc wasn't really able to optimize this, and generated code to perform the
"conversion" at runtime.
Because of this, even our own code in coredumpctl wasn't using
SD_ID128_CONST_STR.
Add a new macro to generate a constant string: SD_ID128_MAKE_STR.
It is not as elegant as SD_ID128_CONST_STR, because it requires a repetition
of the numbers, but in practice it is more convenient to use, and allows gcc
to generate smarter code:
$ size .libs/systemd{,-logind,-journald}{.old,}
text data bss dec hex filename
1265204 149564 4808 1419576 15a938 .libs/systemd.old
1260268 149564 4808 1414640 1595f0 .libs/systemd
246805 13852 209 260866 3fb02 .libs/systemd-logind.old
240973 13852 209 255034 3e43a .libs/systemd-logind
146839 4984 34 151857 25131 .libs/systemd-journald.old
146391 4984 34 151409 24f71 .libs/systemd-journald
It is also much easier to check if a certain binary uses a certain MESSAGE_ID:
$ strings .libs/systemd.old|grep MESSAGE_ID
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
$ strings .libs/systemd|grep MESSAGE_ID
MESSAGE_ID=c7a787079b354eaaa9e77b371893cd27
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE_ID=641257651c1b4ec9a8624d7a40a9e1e7
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE_ID=d34d037fff1847e6ae669a370e694725
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE_ID=1dee0369c7fc4736b7099b38ecb46ee7
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE_ID=be02cf6855d2428ba40df7e9d022f03d
MESSAGE_ID=7b05ebc668384222baa8881179cfda54
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
This add a new message id for the end of user instance startup.
User manager startup is a different beast then the system startup.
Their descriptions are completely different too. Let's just separate
them.
Partially fixes#3351.
Also remove "successful" from the description, since we don't know if
the startup was successful or not.
This adds an API for retrieving an app-specific machine ID to sd-id128.
Internally it calculates HMAC-SHA256 with an 128bit app-specific ID as payload
and the machine ID as key.
(An alternative would have been to use siphash for this, which is also
cryptographically strong. However, as it only generates 64bit hashes it's not
an obvious choice for generating 128bit IDs.)
Fixes: #4667
This adds a new invocation ID concept to the service manager. The invocation ID
identifies each runtime cycle of a unit uniquely. A new randomized 128bit ID is
generated each time a unit moves from and inactive to an activating or active
state.
The primary usecase for this concept is to connect the runtime data PID 1
maintains about a service with the offline data the journal stores about it.
Previously we'd use the unit name plus start/stop times, which however is
highly racy since the journal will generally process log data after the service
already ended.
The "invocation ID" kinda matches the "boot ID" concept of the Linux kernel,
except that it applies to an individual unit instead of the whole system.
The invocation ID is passed to the activated processes as environment variable.
It is additionally stored as extended attribute on the cgroup of the unit. The
latter is used by journald to automatically retrieve it for each log logged
message and attach it to the log entry. The environment variable is very easily
accessible, even for unprivileged services. OTOH the extended attribute is only
accessible to privileged processes (this is because cgroupfs only supports the
"trusted." xattr namespace, not "user."). The environment variable may be
altered by services, the extended attribute may not be, hence is the better
choice for the journal.
Note that reading the invocation ID off the extended attribute from journald is
racy, similar to the way reading the unit name for a logging process is.
This patch adds APIs to read the invocation ID to sd-id128:
sd_id128_get_invocation() may be used in a similar fashion to
sd_id128_get_boot().
PID1's own logging is updated to always include the invocation ID when it logs
information about a unit.
A new bus call GetUnitByInvocationID() is added that allows retrieving a bus
path to a unit by its invocation ID. The bus path is built using the invocation
ID, thus providing a path for referring to a unit that is valid only for the
current runtime cycleof it.
Outlook for the future: should the kernel eventually allow passing of cgroup
information along AF_UNIX/SOCK_DGRAM messages via a unique cgroup id, then we
can alter the invocation ID to be generated as hash from that rather than
entirely randomly. This way we can derive the invocation race-freely from the
messages.
coredump had code to check if copy_bytes() hit the max_bytes limit,
and refuse further processing in that case.
But in 84ee096044, the return convention for copy_bytes() was changed
from -EFBIG to 1 for the case when the limit is hit, so the condition
check in coredump couldn't ever trigger.
But it seems that *do* want to process such truncated cores [1].
So change the code to detect truncation properly, but instead of
returning an error, give a nice log entry.
[1] https://github.com/systemd/systemd/issues/3883#issuecomment-239106337
Should fix (or at least alleviate) #3883.
Old libdbus has a feature that the process is terminated whenever the the bus
connection receives a disconnect. This is pretty useful on desktop apps (where
a disconnect indicates session termination), as well as on command line apps
(where we really shouldn't stay hanging in most cases if dbus daemon goes
down).
Add a similar feature to sd-bus, but make it opt-in rather than opt-out, like
it is on libdbus. Also, if the bus is attached to an event loop just exit the
event loop rather than the the whole process.
This adds an optional "recursive" counting mode to sd_bus_track. If enabled
adding the same name multiple times to an sd_bus_track object is counted
individually, so that it also has to be removed the same number of times before
it is gone again from the tracking object.
This functionality is useful for implementing local ref counted objects that
peers make take references on.
This extends the existing event loop iteration counter to 64bit, and exposes it
via a new function sd_event_get_iteration(). This is helpful for cases like
issue #3612. After all, since we maintain the counter anyway, we might as well
expose it.
(This also fixes an unrelated issue in the man page for sd_event_wait() where
micro and milliseconds got mixed up)
Add sd_notify() parameter to change watchdog_usec during runtime.
Application can change watchdog_usec value by
sd_notify like this. Example. sd_notify(0, "WATCHDOG_USEC=20000000").
To reset watchdog_usec as configured value in service file,
restart service.
Notice.
sd_event is not currently supported. If application uses
sd_event_set_watchdog, or sd_watchdog_enabled, do not use
"WATCHDOG_USEC" option through sd_notify.
This reworks sd-ndisc and networkd substantially to support IPv6 RA much more
comprehensively. Since the API is extended quite a bit networkd has been ported
over too, and the patch is not as straight-forward as one could wish. The
rework includes:
- Support for DNSSL, RDNSS and RA routing options in sd-ndisc and networkd. Two
new configuration options have been added to networkd to make this
configurable.
- sd-ndisc now exposes an sd_ndisc_router object that encapsulates a full RA
message, and has direct, friendly acessor functions for the singleton RA
properties, as well as an iterative interface to iterate through known and
unsupported options. The router object may either be retrieved from the wire,
or generated from raw data. In many ways the sd-ndisc API now matches the
sd-lldp API, except that no implicit database of seen data is kept. (Note
that sd-ndisc actually had a half-written, but unused implementaiton of such
a store, which is removed now.)
- sd-ndisc will now collect the reception timestamps of RA, which is useful to
make sd_ndisc_router fully descriptive of what it covers.
Fixes: #1079
Let's make sd-lldp a bit more like sd-ndisc ant the other APIs, and add proper
ref counting and a separate call for setting the ifindex.
This also adds a new lldp_reset() call we can use at various places to close
all fds. This is also similar to how sd-ndisc already does it.
It's a good idea to store away the recption time of LLDP packets in the
neighbor object, simply because the LLDP data only has a validity of a certain
amount of time.
Hence, let's record the timestamp when we receive the datagram and expose an
API for it. Also, automatically expire LLDP neighbors based on this new
timestamp.
A field "index" is not particularly precise and also might conflict with libc's
index() function definition. Also, pretty much everywhere else we call this
concept "ifindex", including in networkd, the primary user of these libraries.
Hence, let's fix this up and call this "ifindex" everywhere here too.
Add an option to disable appending DHCP option 3 (Router) to the DHCP
OFFER and ACK packets.
This commit adds the boolean option EmitRouter= for the [DHCPServer]
section in .network files.
Rationale: On embedded devices, it is very useful to have a DHCP server
running on an USB OTG ethernet gadget interface to avoid manual setup on
the client PCs, but it should only serve IP addresses, no route(r)s.
Otherwise, Windows clients experience network connectivity issues, due
to them using the address set in DHCP option 3 as default gateway.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Introduce
1. sd_rtnl_message_route_set_table to set table ID
2. sd_rtnl_message_route_set_family to set family
Both required to configure route properties.
With this change a new flag SD_JOURNAL_OS_ROOT is introduced. If specified
while opening the journal with the per-directory calls (specifically:
sd_journal_open_directory() and sd_journal_open_directory_fd()) the passed
directory is assumed to be the root directory of an OS tree, and the journal
files are searched for in /var/log/journal, /run/log/journal relative to it.
This is useful to allow usage of sd-journal on file descriptors returned by the
OpenRootDirectory() call of machined.
Also, expose this via the "journalctl --file=-" syntax for STDIN. This feature
remains undocumented though, as it is probably not too useful in real-life as
this still requires fds that support mmaping and seeking, i.e. does not work
for pipes, for which reading from STDIN is most commonly used.
lldp.h contains definitions of LLDP types, subtypes and capabilities which
should be exposed in public headers. Get rid of the file and move those
definitions to sd-lldp.h with the SD_ prefix.
Since glibc is moving away from implicitly including sys/sysmacros.h
all the time via sys/types.h, include the header directly in more
places. This seems to cover most makedev/major/minor usage.
Simply avoid the trouble and use a void* if the define
is missing. We lose type safety, but who cares.
sigaction(2) says that siginfo_t requires _POSIX_C_SOURCE >= 199309L,
but we can be a bit more generous and use the same define
as /usr/include/signal.h.
This commit rips out systemd-bootchart. It will be given a new home, outside
of the systemd repository. The code itself isn't actually specific to
systemd and can be used without systemd even, so let's put it somewhere
else.
Instead of just notifying about the fact that something changed in the
database, actually inform the callback what precisely changed. This is useful,
so that the LLDP tx logic can be put into "fast" mode as soon as a previously
unknown peer appears, as suggested by the LLDP spec.
This reworks the sd-lldp substantially, simplifying things on one hand, and
extending the logic a bit on the other.
Specifically:
- Besides the sd_lldp object only one other object is maintained now,
sd_lldp_neighbor. It's used both as storage for literal LLDP packets, and for
maintainging info about peers in the database. Separation between packet, TLV
and chassis data is not maintained anymore. This should be a major
simplification.
- The sd-lldp API has been extended so that a couple of per-neighbor fields may
be queried directly, without iterating through the object. Other fields that
may appear multiple times, OTOH have to be iterated through.
- The maximum number of entries in the neighbor database is now configurable
during runtime.
- The generation of callbacks from sd_lldp objects is more restricted:
callbacks are only invoked when actual data changed.
- The TTL information is now hooked with a timer event, so that removals from
the neighbor database due to TTLs now result in a callback event.
- Querying LLDP neighbor database will now return a strictly ordered array, to
guarantee stability.
- A "capabilities" mask may now be configured, that selects what type of LLDP
neighbor data is collected. This may be used to restrict collection of LLDP
info about routers instead of all neighbors. This is now exposed via
networkd's LLDP= setting.
- sd-lldp's API to serialize the collected data to text files has been removed.
Instead, there's now an API to extract the raw binary data from LLDP neighbor
objects, as well as one to convert this raw binary data back to an LLDP
neighbor object. networkd will save this raw binary data to /run now, and the
client side can simply parse the information.
- support for parsing the more exotic TLVs has been removed, since we are not
using that. Instead there are now APIs to extract the raw data from TLVs.
Given how easy it is to parse the TLVs clients should do so now directly
instead of relying on our APIs for that.
- A lot of the APIs that parse out LLDP strings have been simplified so that
they actually return strings, instead of char arrays with a length. To deal
with possibly dangerous characters the strings are escaped if needed.
- APIs to extract and format the chassis and port IDs as strings has been
added.
- lldp.h has been simplified a lot. The enums are anonymous now, since they
were never used as enums, but simply as constants. Most definitions we don't
actually use ourselves have eben removed.
Let's just keep the few parts we actually need of it in the main sd_lldp
object, so that we can simplify things quite a bit.
While we are at it, remove ifname and mac fields which we make no use of
whatsoever.
This adds two new calls to get the list of all journal fields names currently in use.
This is the low-level support to implement the feature requested in #2176 in a more optimized way.
Also introduce sd_journal_has_runtime_files() and
sd_journal_has_persistent_files() to the public API. These functions
can be used to easily find out if the open journal files are runtime
and/or persistent.
Previously, .network files only knew a vaguely defined "Domains=" concept, for which the documentation declared it was
the "DNS domain" for the network connection, without specifying what that means.
With this the Domains setting is reworked, so that there are now "routing" domains and "search" domains. The former are
to be used by resolved to route DNS request to specific network interfaces, the latter is to be used for searching
single-label hostnames with (in addition to being used for routing). Both settings are configured in the "Domains="
setting. Normal domain names listed in it are now considered search domains (for compatibility with existing setups),
while those prefixed with "~" are considered routing domains only. To route all lookups to a specific interface the
routing domain "." may be used, referring to the root domain. An alternative syntax for this is the "*", as was already
implemented before using the "wildcard" domain concept.
This commit adds proper parsers for this new logic, and exposes this via the sd-network API. This information is not
used by resolved yet, this will be added in a later commit.
If we downgrade from DNSSEC to non-DNSSEC mode, let's log about this in a recognizable way (i.e. with a message ID),
after all, this is of major importance.
libsystemd-network provides the public function
sd_dhcp6_client_set_request_option() to enable the request of a given
DHCP option. However the enum defining such options is defined in the
internal header dhcp6-protocol.h. Move the enum definition to the
public header sd-dhcp6-client.h and properly namespace values.
libsystemd-network provides the public function
sd_dhcp_client_set_request_option() to enable the request of a given
DHCP option. However the enum defining such options is defined in the
internal header dhcp-protocol.h. Move the enum definition to the
public header sd-dhcp-client.h and properly namespace values.
At the moment sd_dhcp_lease_get_routes() returns an array of structs
which are not defined in public headers. Instead, change the function
to return an array of pointers to opaque sd_dhcp_route objects.
With this patch resolved will properly handle revoked keys, but not
augment the locally configured trust anchor database with newly learned
keys.
Specifically, resolved now refuses validating RRsets with
revoked keys, and it will remove revoked keys from the configured trust
anchors (only until reboot).
This patch does not add logic for adding new keys to the set of trust
anchors. This is a deliberate decision as this only can work with
persistent disk storage, and would result in a different update logic
for stateful and stateless systems. Since we have to support stateless
systems anyway, and don't want to encourage two independent upgrade
paths we focus on upgrading the trust anchor database via the usual OS
upgrade logic.
Whenever a trust anchor entry is found revoked and removed from the
trust anchor a recognizable log message is written, encouraging the user
to update the trust anchor or update his operating system.
This renames __useless_struct_to_allow_trailing_semicolon__ everywhere
to _sd_useless_struct_to_allow_trailing_semicolon_, to follow our usual
rule of prefixing stuff from public headers that should be considered
internal with "_sd_".
While we are at it, also to be safe: when the struct is used in the C++
protector macros make sure to use two different names depending on
whether it appears in the C++ or C side of things. After all, there
might be compilers that don't consider C++ and C structs the same.
See https://github.com/systemd/systemd/pull/2052#discussion_r46067059
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
We already have a state RUNNING and EXITING when we dispatch regular and
exit callbacks. Let's introduce a new state called PREPARING that is
active while we invoke preparation callbacks. This way we have a state
each for all three kinds of event handlers.
The states are currently not documented, hence let's add a new state to
the end, before we start documenting this.
As the data passed is very different, we introduce four different callbacks:
- Generic - router discovery timed out or state machine stopped
- Router - router and link configuration received
- Prefix onlink - configuration for an onlink prefix received
- Prefix autonomous - configuration for to configure a SLAAC address for a prefix received
It is really unclear if we want to / have the resources to support this fully, so drop it
for now. It can easily be brought back if a killer usecase emerges.
Note that this code was never hooked up, so this does not remove any features.
Exported header files should not include internal headers. Fix that.
Exported header files should not use the bool type. So far we opted to
stick to C89 for exported headers, and hence use "int" for bools in
them. Continue to do so.
Exported header files should have #include lines for everything they use
including inttypes.h and sys/types.h, so that they may be included in
any order.
Exported header files should have C++ guards, hence add them.
Exported header files should not use gcc extensions like #pragma once,
get rid of it.
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.