Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> logind sessions are mostly bound to the audit session concept, and audit
> sessions remain unaffected by "su", in fact they are defined to be
> "sealed off", i.e. in a way that if a process entered a session once, it
> will always stay with it, and so will its children, i.e. the only way to
> get a new session is by forking off something off PID 1 (or something
> similar) that never has been part of a session.
The code had a gap. user@.service is a special case PAM session which does
not create a logind session. Let's remember to check for it.
Fixes#8021
This is an attempt to improve #8228 a bit, by extending the /run/nologin
a bit, but still keeping it somewhat brief.
On purpose I used the vague wording "unprivileged user" rather than
"non-root user" so that pam_nologin can be updated to disable its
behaviour for members of the "wheel" group one day, and our messages
would still make sense.
See #8228.
This usually is very annoying to users who then cannot log in, so
make sure we always warn if that happens (selinux, or whatever other reason).
This reverts a790812cb3.
This change adds support for controlling the suspend-on-lid-close
behaviour based on the power status as well as whether the machine is
docked or has an external monitor. For backwards compatibility the new
configuration file variable is ignored completely by default, and must
be set explicitly before being considered in any decisions.
If for some reason we can't query the firmware state, don't propagate
that to clients, but instead log about it, and claim that
reboot-to-firmware is not available (which is the right answer, since it
is not working).
Let's log about this though, as this is certainly relevant to know, even
though not for the client.
SetLinger is authorized by the PolicyKit action "set-self-linger", if it is
not passed an explicit UID.
According to comments we were determining the default UID from the client's
session. However, user processes e.g. which are run from a terminal
emulator do not necessarily belong to a session scope unit. They may
equally be started from the systemd user manager [1][2]. Actually the
comment was wrong, and it would also have worked for processes
started from the systemd user manager.
Nevertheless it seems to involve fetching "augmented credentials" i.e.
it's using a racy method, so we shouldn't have been authenticating based
on it.
We could change the default UID, but that raises issues especially for
consistency between the methods. Instead we can just use the clients
effective UID for authorization.
This commit also fixes `loginctl enable-linger $USER` to match the docs
that say it was equivalent to `loginctl enable-linger` (given that $USER
matches the callers user and owner_uid). Previously, the former would not
have suceeded for unpriviliged users in the default configuration.
[1] It seems the main meaning of per-session scopes is tracking the PAM
login process. Killing that provokes logind to revoke device access. Less
circularly, killing it provokes getty to hangup the TTY.
[2] User units may be started with an environment which includes
XDG_SESSION_ID (presuambly GNOME does this?). Or not.
The manpages tell that such calls have quite limited meaning. logind has
a few in the implementation of what remains of the session concept.
At the same time, logind basically exposes sd_pid_get_session() as public
API. This is absolutely required, to retain compatability e.g. with Xorg.
But client code will work in more situations if it avoids assuming that it
runs in a session itself.
Its use inside the login session could be replaced with $XDG_SESSION_ID
(which pam_systemd sets). I don't know whether it would be useful to
change Xorg at this point or not. But if you were building something new,
you would think about whether you want to support running it in a systemd
service.
Comment these logind API features, acknowledging the reason they exist is
based in history. I.e. help readers avoid drawing implications from their
existence which apply to history, but not the current general case.
Finally, searching these revealed a call to sd_pid_get_session() in
implementing some types of logind inhibitors. So these inhibitors don't
work as intended when taken from inside a systemd user service :(. Comment
this as well, deferring it as ticket #6852.
If you try to run `loginctl user-status` on a non-logged in user to see
whether "Linger" is enabled, it doesn't work.
If you're already an expert in logind, the fact that the user is considered
unknown actually tells you the user is not lingering. So, probably they
they do not have lingering enabled. I think we can point towards this
without being misleading.
I also reword it because I thought it was slightly confusing to run
`loginctl user-status root` and get an error back about "User 0". Try to
be more specific, that it is "User ID 0".
GetSessionByPID(0) can fail with NO_SESSION_FOR_PID. More obscurely, if
the session is abandoned, it can return NO_SUCH_SESSION. It is not clear
that the latter was intended. The message associated with the former,
hints that this was overlooked.
We don't have a document enumerating the errors. Any specific
error-handling in client code, e.g. translated messages, would also be
liable to overlook the more obscure error code.
I can't see any equivalent condition for GetUserByPID(0). On the other
hand, the code did not return NO_USER_FOR_PID where it probably should.
The relevant code is right next to that for GetSessionByPID(0), so it will
be simpler to understand if both follow the same pattern.
This adds new method calls Halt() and CanHalt() to the logind bus APIs.
They aren't overly useful (as the whole concept of halting isn't really
too useful), however they clean up one major asymmetry: currently, using
the "shutdown" legacy commands it is possibly to enqueue a "halt"
operation through logind, while logind officially doesn't actually
support this. Moreover, the path through "shutdown" currently ultimately
fails, since the referenced "halt" action isn't actually defined in
PolicyKit.
Finally, the current logic results in an unexpected asymmetry in
systemctl: "systemctl poweroff", "systemctl reboot" are currently
asynchronous (due to the logind involvement) while "systemctl halt"
isnt. Let's clean this up, and make all three APIs implemented by
logind natively, and all three hence asynchronous in "systemctl".
Moreover, let's add the missing PK action.
Fixes: #6957
This reverts commit ee043777be.
It broke almost everywhere it touched. The places that
handn't been converted, were mostly followed by special
handling for the invalid PID `0`. That explains why they
tested for `pid < 0` instead of `pid <= 0`.
I think that one was the first commit I reviewed, heh.
Following commit b498d6ea, I belated realized we should tighten the
assertions as well, to make sure that we're setting `m->action_what` to
represent an action in progress. (The check for an action in progress is
to compare `m->action_what` to zero)
This fixed https://bugzilla.redhat.com/show_bug.cgi?id=1476313
as much as I was able to reproduce it in a VM, at least.
E.g. this signal might wake the screen back up, providing a more visible
indicator of suspend failure. In my VM testing, it was also required in
order to unblock keyboard input in gnome-shell after the failed suspend.
At the same time, fix the error handling for scheduled shutdowns. This now
mirrors the behaviour of when you use `shutdown -k` - it sends all the
scary messages about shutting down, "but you'll have to do it [shut down
the system] yourself". It also avoids the risk of locking out the admin
(nologin file), in case they logged out for some reason (and they use
`sudo` instead of root).
Not that I have any idea why you'd want to use `shutdown -k`, but the code
is easier to analyze if it rolls back on error (in the absence of any code
comment as to why that's not wanted).
There is no justification not to wait an extra (default) 5 seconds, for
a more graceful shutdown of user programs. Again, you don't get to ignore
delay inhibitors for unscheduled shutdowns, short of
`systemctl poweroff -f`.
It is simplest if we move the test for `m->shutdown_dry_run` into
manager_scheduled_shutdown_handler().
However we need to not add such delays during a "dry run". Otherwise, we
would still have to be considered "in progress" for some seconds after our
admin has seen the final wall message. If they go to `poweroff`, we would
have blocked them with a misleading error message. Note this `poweroff`
will still process delay inhibitors as needed. If the admin planned to
use a more forceful method... eh. It's their responsibility to assess
whether that's safe.
There is an argument that the alternative behaviour could be used (racily!)
to kludge around them not being able to shutdown to "single user mode". If
we cared about that case, we would have easily preserved non-racy support
for it in `shutdown`.
Additionally, though I think this code does read more easily by reducing
inconsistencies, we didn't come up with any use case for delay inhibitors
v.s. shutdown.[1] The SIGTERM v.s. SIGKILL delay is more general, and we
allow a whole 90 seconds for it, not just 5. So I don't think keeping this
approach bears a risk of significant damage.
[1] https://www.freedesktop.org/wiki/Software/systemd/inhibit/
> We don't want to shutdown while a suspend is running, and vice versa.
> This would be confusing and could lead to data loss in the worst case.
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1441253/comments/4
According to the above comment, if the conflicting operation is hung,
we don't want to force things when the admin has not passed a force option.
Similarly if you're not an admin, you probably shouldn't get to sneak
around this check by using a scheduled shutdown instead of an unscheduled
one. (And no-one so far thought it necessary to add such a permission in
PolKit).
Note that if the conflicting operation was _not_ hung, and we lost the
race with suspend, the system might not have shut down at the scheduled
time anyway. Which is no good if you were scheduling a power outage.
And scheduling a shutdown for an arbitrary time when the system is resumed,
does not seem a very useful semantic. More likely, scheduled shutdowns are
useful on systems which do not use suspend, such as multi-user servers.
(In which case even PolKit defaults likely don't let the users trigger
suspend).
Let's add a proper validation function, since validation isn't entirely
trivial. Make use of it where applicable. Also make use of
AUDIT_SESSION_INVALID where we need a marker for an invalid audit
session.
Embedding sd_id128_t's in constant strings was rather cumbersome. We had
SD_ID128_CONST_STR which returned a const char[], but it had two problems:
- it wasn't possible to statically concatanate this array with a normal string
- gcc wasn't really able to optimize this, and generated code to perform the
"conversion" at runtime.
Because of this, even our own code in coredumpctl wasn't using
SD_ID128_CONST_STR.
Add a new macro to generate a constant string: SD_ID128_MAKE_STR.
It is not as elegant as SD_ID128_CONST_STR, because it requires a repetition
of the numbers, but in practice it is more convenient to use, and allows gcc
to generate smarter code:
$ size .libs/systemd{,-logind,-journald}{.old,}
text data bss dec hex filename
1265204 149564 4808 1419576 15a938 .libs/systemd.old
1260268 149564 4808 1414640 1595f0 .libs/systemd
246805 13852 209 260866 3fb02 .libs/systemd-logind.old
240973 13852 209 255034 3e43a .libs/systemd-logind
146839 4984 34 151857 25131 .libs/systemd-journald.old
146391 4984 34 151409 24f71 .libs/systemd-journald
It is also much easier to check if a certain binary uses a certain MESSAGE_ID:
$ strings .libs/systemd.old|grep MESSAGE_ID
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
$ strings .libs/systemd|grep MESSAGE_ID
MESSAGE_ID=c7a787079b354eaaa9e77b371893cd27
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE_ID=641257651c1b4ec9a8624d7a40a9e1e7
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE_ID=d34d037fff1847e6ae669a370e694725
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE_ID=1dee0369c7fc4736b7099b38ecb46ee7
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE_ID=be02cf6855d2428ba40df7e9d022f03d
MESSAGE_ID=7b05ebc668384222baa8881179cfda54
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
We don't have plural in the name of any other -util files and this
inconsistency trips me up every time I try to type this file name
from memory. "formats-util" is even hard to pronounce.
For similar reasons as the recent addition of a limit on sessions.
Note that we don't enforce a limit on inhibitors per-user currently, but
there's an implicit one, since each inhibitor takes up one fd, and fds are
limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
We really should put limits on all resources we manage, hence add one to the
number of concurrent sessions, too. This was previously unbounded, hence set a
relatively high limit of 8K by default.
Note that most PAM setups will actually invoke pam_systemd prefixed with "-",
so that the return code of pam_systemd is ignored, and the login attempt
succeeds anyway. On systems like this the session will be created but is not
tracked by systemd.
We enable lingering for anyone who wants this. It is still disabled by
default to avoid keeping long-running processes accidentally.
Admins might want to customize this policy on multi-user sites.
systemd-logind uses mkdir_label and label_fix functions without calling
first mac_selinux_init. This makes /run/user/$UID/ directories not
labelled correctly on an Arch Linux system using SELinux.
Fix this by calling mac_selinux_init("/run") early in systemd-logind.
This makes files created in /etc/udev/rules.d and /var/lib/systemd to be
labelled through transitions in the SELinux policy instead of using
setfscreatecon (with mac_selinux_create_file_prepare).
manager_{start,stop}_{slice,scope,unit} functions had an optional job
output parameter. But all callers specified job, so make the parameter
mandatory, add asserts. Also extract common job variable handling to
a helper function to avoid duplication.
Avoids gcc warning about job being unitialized.
gcc is confused by the common idiom of
return errno ? -errno : -ESOMETHING
and thinks a positive value may be returned. Replace this condition
with errno > 0 to help gcc and avoid many spurious warnings. I filed
a gcc rfe a long time ago, but it hard to say if it will ever be
implemented [1].
Both conventions were used in the codebase, this change makes things
more consistent. This is a follow up to bcb161b023.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846
method_schedule_shutdown referenced org.freedesktop.login1.poweroff*
which is never registered in polkit.
Now refers to org.freedesktop.login1.power-off*
Signed-off-by: Joost Bremmer <toost.b@gmail.com>
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
If we requeue jobs, we are no longer interested in old jobs. Hence, we
better ignore any JobRemoved signals for old jobs and concentrate on our
replacements.
When queuing unit jobs, we should rather replace existing units than
fail. This is especially important when we queued a user-shutdown and a
new login is encountered. In this case, we better raplce the shutdown
jobs. systemd takes care of everything else.
This new setting configures the TasksMax= field for the slice objects we
create for each user.
This alters logind to create the slice unit as transient unit explicitly
instead of relying on implicit generation of slice units by simply
starting them. This also enables us to set a friendly description for
slice units that way.
The files are named too generically, so that they might conflict with
the upstream project headers. Hence, let's add a "-util" suffix, to
clarify that this are just our utility headers and not any official
upstream headers.
So far we had two pretty much identical calls in user-util.[ch]:
lookup_uid() and uid_to_name(). Get rid of the former, in favour of the
latter, and while we are at it, rewrite it, to use getpwuid_r()
correctly, inside an allocation loop, as POSIX intended.
When the Suspend method is called, the only log message we write
(unless debugging is enabled) is "Operation finished.". This is
not very helpful when trying to figure out what is going on, so
add what operation we are talking about to the message:
"Operation 'sleep' finished.".
Hat tip to Daniel Aleksandersen for pointing this out.
systemd-logind[27]: System is rebooting. (Applied kernel updates.)
is changed to
systemd-logind[27]: System is rebooting (Applied kernel updates).
Users should not add a dot in the sentence in --message, i.e. the correct usage is now:
$ systemctl reboot --message "Applied kernel updates"
Allow passing a "dry-" prefix to the action parameter passed to
.ScheduleShutdown(). When strings with this prefix are passed,
the scheduled action will not take place. Instead, an info message
is logged.
Extra details for an action can be supplied when calling polkit's
CheckAuthorization method. Details are a list of key/value string pairs.
Custom policy can use these details when making authorization decisions.
We treat an empty wall-message equal to a NULL wall-message since:
commit 5744f59a3e
Author: Lennart Poettering <lennart@poettering.net>
Date: Fri Sep 4 10:34:47 2015 +0200
logind: treat an empty wall message like a NULL one
Fix the shutdown scheduler to not deref a NULL pointer, but properly
check for an empty wall-message.
Fixes: #1120
Enable unprivileged users to set wall message on a shutdown
operation. When the message is set via the --message option,
it is logged together with the default shutdown message.
$ systemctl reboot --message "Applied kernel updates."
$ journalctl -b -1
...
systemd-logind[27]: System is rebooting. (Applied kernel updates.)
...
Use mfree() where we can.
Drop unnecessary {}.
Drop unnecessary variable declarations.
Cast syscall invocations where explicitly don't care for the return
value to (void).
Reword a comment.
If we get a weird signal, then we should log about it, but not return an
error, since sd-bus will not call us again then anymore, but for these
signals we match here we actually do want to be called on the next
invocation.
Let logind use the sd_bus_track helper object to track the controllers of
sessions. This does not only remove quite some code but also kills the
unconditional matches for all NameOwnerChanged signals.
The latter is something we should never ever do, as it wakes up the daemon
every time a client connects, which doesn't scale.
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
WRITE_STRING_FILE_ATOMIC is only valid if WRITE_STRING_FILE_CREATE is also
given. IOW, an atomic file write operation is only possible when creating a
file is also being asked for.
This is a regression from the recent write_string_file() rework.
A while back we opened up all of logind's bus calls to unprivileged
users, via PK. However, the dbus1 policy wasn't updated accordingly.
With this change, the dbus1 policy is opened up for all bus calls that
should be available to unprivileged clients.
(also rearranges some calls in the vtable, to make more sense, and be in
line with the order in the bus policy file)
Fixes#471.
Make sure a greeter can forcefully spawn a session on a VT that is
in-use. A recent patch prevented this (this used to be possible for all
session types) as it is highly fragile. However, as it turns out,
greeters seem to rely on that feature. Therefore, make sure we allow it
explicitly for greeters.
Right now, if you're already in a session and call CreateSession, we
return information about the current session of yours. This is highy
confusing and a nasty hack. Avoid that, and instead return a commonly
known error, so the caller can detect that.
This has the side-effect, that we no longer override XDG_VTNR and XDG_SEAT
in pam_systemd, if you're already in a session. But this sounds like the
right thing to do, anyway.
Old gdm and lightdm start the user-session during login before they
destroy the greeter-session. Therefore, the user-session will take over
the VT from the greeter. We recently prevented this by never allowing
multiple sessions on the same VT. Fix this now, by explicitly allowing
this if the owning session is a GREETER.
Note that gdm no longer behaves like this. Instead, due to wayland, they
always use a different VT for each session. All other login-managers are
highly encouraged to destroy the greeter-session _before_ starting the
user-session. We now work around this, but this will probably not last
forever (and will already have nasty side-effects on the greeter-session).
Merge write_string_file(), write_string_file_no_create() and
write_string_file_atomic() into write_string_file() and provide a flags mask
that allows combinations of atomic writing, newline appending and automatic
file creation. Change all users accordingly.
Right now, if you start a session via 'su' or 'sudo' from within a
session, we make sure to re-use the existing session instead of creating a
new one. We detect this by reading the session of the requesting PID.
However, with gnome-terminal running as a busname-unit, and as such
running outside the session of the user, this will no longer work.
Therefore, this patch makes sure to return the existing session of a VT if
you start a new one.
This has the side-effect, that you will re-use a session which your PID is
not part of. This works fine, but will break assumptions if the parent
session dies (and as such close your session even though you think you're
part of it). However, this should be perfectly fine. If you run multiple
logins on the same session, you should really know what you're doing. The
current way of silently accepting it but choosing the last registered
session is just weird.
Commit c0f32805 ("logind: use sd_event timer source for inhibitor
logic") reworked the main loop logic of logind so that it uses a
real timeout callback handler to execute delayed functions.
What the old code did, however, was to call those functions on
every iteration in the main loop, not only when the timeout
expired.
Restore that behavior by bringing back manager_dispatch_delayed(),
and call it from manager_run(). The internal event source callback
manager_inhibit_timeout_handler() was turned into a wrapper of
manager_dispatch_delayed() now.
Previously, we'd just count connected displays, and if there was 2 or
more we assumed a "docked" state.
With this change we now:
- Only count external displays, ignore internal ones (which we detect by
checking the connector name against a whitelist of known external plug
types)
- We ignore connectors which are explicitly disabled
- We then compare the count with >= 1 rather than >= 2 as before
This new logic has the benefit that systems that disconnect the internal
display when the lid is closed are better supported. Also, explicitly
disabled ports do not confuse the algorithm anymore.
This new algorithm has been suggested here:
http://lists.freedesktop.org/archives/intel-gfx/2015-June/068821.html
This also makes two functions static, that are not used outside of their
.c files.
When (for example) switching from X11 to a new VT and logging in there,
creating a new session, the user state file (/run/systemd/users/$uid) is
not updated after the session becomes active. The latest time it is
saved is when the session is in SESSION_OPENING.
This results in a /run/systemd/users/$uid file which contains
STATE=online for the current user on the current active VT, which is
obviously wrong.
As functions like sd_uid_get_state() use this file to get the user’s
state, this could result in things like PolicyKit making incorrect
decisions about the user’s state. (See
https://bugs.freedesktop.org/show_bug.cgi?id=76358.)
Fix this by re-saving the state for a session’s user after completing
the state_job for that session.
https://bugs.freedesktop.org/show_bug.cgi?id=90818
If NULL is specified for the bus it is now automatically derived from
the passed in message.
This commit also changes a number of invocations of sd_bus_send() to
make use of this.
This should simplify the prototype a bit. The bus parameter is redundant
in most cases, and in the few where it matters it can be derived from
the message via sd_bus_message_get_bus().
Port over more code from shutdownd and teach logind to write /run/nologin at
least 5 minutes before the system is going down, and
/run/systemd/shutdown/scheduled when a shutdown is scheduled.
Add a timer to print UTMP wall messages so that it repeatedly informs users
about a scheduled shutdown:
* every 1 minute with less than 10 minutes to go
* every 15 minutes with less than 60 minutes to go
* every 30 minutes with less than 180 minutes (3 hours) to go
* every 60 minutes if more than that to go
This functionality only active if the .EnableWallMessages DBus property
is set to true. Also, a custom string can be added to the wall message,
set through the WallMessagePrefix property.
Add a method called ScheduleShutdown in org.freedesktop.login1.Manager
which adds a timer to shut down the system at a later point in time.
The first argument holds the type of the schedule that is about to
happen, and must be one of 'reboot', 'halt' or 'poweroff'.
The second argument specifies the absolute time, based on
CLOCK_REALTIME in nanoseconds, at which the the operation should be
executed.
To cancel a previously scheduled shutdown, the CancelScheduledShutdown()
can be called, which returns a bool, indicating whether a scheduled
timeout was cancelled.
Also add a new property called ScheduledShutdown which returns the
equivalent to what was passed in via ScheduleShutdown, as '(st)' type.
Factor out the code to ask polkit for authorization from
method_do_shutdown_or_sleep() into an own function called
verify_shutdown_creds().
This is needed in order to also use the same checks when shutdown
operations are scheduled. For that, it's also necessary to allow
NULL values for that action{,_multiple_sessions,_ignore_inhibit)
arguments, which will suppress the call if no action string is
passed.
Instead of open-coding the delayed action and inhibit timeout logic,
switch over to a real sd_event_source based implementation.
This is not only easier to read but also allows us to add more timers
in the future.
Newer dbus versions have an "allow interactive authentication" bit in
the message header, hence it is not necessary to take a boolean for this
explicitly.
Interactive authorization should only happen asynchronously, hence
disallow it in synchronous bus_verify_polkit(), and rename it to
bus_test_polkit(). This way even if the bus message header asks for
interactive authorization, we'll ask for non-interactive authorization
which is actually the desired behaviour if CanSuspend, CanHibernate and
friends, which call this function.
This introduces 'HoldoffTimeoutSec' to logind.conf to make
IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable.
Background: If an external monitor is connected, or if the system is
docked, we want to ignore LID events. This is required to support setups
where a laptop is used with external peripherals while the LID is closed.
However, this requires us to probe all hot-plugged devices before reacting
to LID events. But with modern buses like USB, the standards do not impose
any timeout on the slots, so we have no chance to know whether a given
slot is used or not. Hence, after resume and startup, we have to wait a
fixed timeout to give the kernel a chance to probe devices. Our timeout
has always been generous enough to support even the slowest devices.
However, a lot of people didn't use these features and wanted to disable
the hold-off timer. Now we provide a knob to do that.
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
Also, allow clients to alter their own objects without any further
priviliges. i.e. this allows clients to kill and lock their own sessions
without involving PK.
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
Whenever a process performs an action on an object, the kernel uses the
EUID of the process to do permission checks and to apply on any newly
created objects. The UID of a process is only used if someone *ELSE* acts
on the process. That is, the UID of a process defines who owns the
process, the EUID defines what privileges are used by this process when
performing an action.
Process limits, on the other hand, are always applied to the real UID, not
the effective UID. This is, because a process has a user object linked,
which always corresponds to its UID. A process never has a user object
linked for its EUID. Thus, accounting (and limits) is always done on the
real UID.
This commit fixes all sd-bus users to use the EUID when performing
privilege checks and alike. Furthermore, it fixes unix-creds to be parsed
as EUID, not UID (as the kernel always takes the EUID on UDS). Anyone
using UID (eg., to do user-accounting) has to fall back to the EUID as UDS
does not transmit the UID.
More specifically, if an operation is requested on a session with an
empty name, the caller's session is used. If an operation is requested
on a seat with an empty name, the seat of the caller's session is used.
Finally, if an operation on the user with UID -1 is requested, the user
of the client's session is used (and not the UID of the client!).
They do not use any functions from libcap directly. The CAP_* constants in use
through these files come from "missing.h" which will import <linux/capability.h>
and complement it with CAP_* constants not defined by the current kernel
headers. The "missing.h" header is imported through "util.h" which gets
imported in "logind.h".
Tested that "systemd-logind" builds cleanly and works after this change.
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
First, let's drop the "bus" argument, we can determine it from the
message anyway.
Secondly, determine the right callback/userdata pair automatically from
what is currently is being dispatched. This should simplify things a lot
for us, since it makes it unnecessary to pass pointers through the
original handlers through all functions when we process messages, which
might require authentication.
This is a generalization of the vtable privilege check we already have,
but exported, and hence useful when preparing for a polkit change.
This will deal with the complexity that on dbus1 one cannot trust the
capability field we retrieve via the bus, since it is read via
/proc/$$/stat (and thus might be out-of-date) rather than directly from
the message (like on kdbus) or bus connection (as for uid creds on
dbus1).
Also, port over all code to this new API.
If the session already exists then the only way to log it is to set the
debug option of pam_systemd. There are no debug messages in the login
service that permits to log if the session already exists.
So just add it, and while we are it add the "uid" field to the debug
message that indicates that the session was created.
This is needed to give USB docking stations and suchlike time to settle,
so that a display connected to an USB docking station can actually act
as a lid swith inhibitor correctly.
With this change we should have somewhat reliable docking station
support in place.
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
Otherwise we get a (harmless) message like:
systemd-logind[30845]: Failed to process message [type=signal sender=:1.36 path=/org/freedesktop/systemd1/job/4674 interface=org.freedesktop.DBus.Properties member=PropertiesChanged signature=sa{sv}as]: Invalid argument
The session_send_create_reply() function which notifies clients about
session creation is used for both session and user units. Unify the
shared code in a new function session_jobs_reply().
The session_save() will be called unconditionally on sessions since it
does not make sense to only call it if '!session->started', this will
also allow to update the session state as soon as possible.
Simplify the shutdown logic a bit:
- Keep the session FIFO around in the PAM module, even after the session
shutdown hook has been finished. This allows logind to track precisely
when the PAM handler goes away.
- In the ReleaseSession() call start a timer, that will stop terminate
the session when elapsed.
- Never fiddle with the KillMode of scopes to configure whether user
processes should be killed or not. Instead, simply leave the scope
units around when we terminate a session whose processes should not be
killed.
- When killing is enabled, stop the session scope on FIFO EOF or after
the ReleaseSession() timeout. When killing is disabled, simply tell
PID 1 to abandon the scope.
Because the scopes stay around and hence all processes are always member
of a scope, the system shutdown logic should be more robust, as the
scopes can be shutdown as part of the usual shutdown logic.
This is initialized from XDG_SESSION_DESKTOP and is useful for GNOME
to recognize its own sessions. It's supposed to be set to a short string
identifying the session, such as "kde" or "gnome".
Introduces a new concept of "trusted" vs. "untrusted" busses. For the
latter libsystemd-bus will automatically do per-method access control,
for the former all access is automatically granted. Per-method access
control is encoded in the vtables: by default all methods are only
accessible to privileged clients. If the SD_BUS_VTABLE_UNPRIVILEGED flag
is set for a method it is accessible to unprivileged clients too. By
default whether a client is privileged is determined via checking for
its CAP_SYS_ADMIN capability, but this can be altered via the
SD_BUS_VTABLE_CAPABILITY() macro that can be ORed into the flags field
of the method.
Writable properties are also subject to SD_BUS_VTABLE_UNPRIVILEGED and
SD_BUS_VTABLE_CAPABILITY() for controlling write access to them. Note
however that read access is unrestricted, as PropertiesChanged messages
might send out the values anyway as an unrestricted broadcast.
By default the system bus is set to "untrusted" and the user bus is
"trusted" since per-method access control on the latter is unnecessary.
On dbus1 busses we check the UID of the caller rather than the
configured capability since the capability cannot be determined without
race. On kdbus the capability is checked if possible from the attached
meta-data of a message and otherwise queried from the sending peer.
This also decorates the vtables of the various daemons we ship with
these flags.
This way we can unify handling of credentials that are attached to
messages, or can be queried for bus name owners or connection peers.
This also adds the ability to extend incomplete credential information
with data from /proc,
Also, provide a convenience call that will automatically determine the
most appropriate credential object for an incoming message, by using the
the attached information if possible, the sending name information if
available and otherwise the peer's credentials.