This way we can use libxcrypt specific functionality such as
crypt_gensalt() and thus take benefit of the newer algorithms libxcrypt
implements. (Also adds support for a new env var $SYSTEMD_CRYPT_PREFIX
which may be used to select the hash algorithm to use for libxcrypt.)
Also, let's move the weird crypt.h inclusion into libcrypt.h so that
there's a single place for it.
Previously we'd allow marking TTY sessions as idle, but when the user
tried to unmark it as idle again it we'd just revert to automatic TTY
atime idle detection, thus making it impossible to mark the session as
non-idle, unless its TTY is atime-touched all the time. But of course,
marking a session as idle is pretty much fatal if you never can mark it
as non-idle again.
This change is triggred by bug reports such as this:
https://github.com/systemd/systemd/issues/14053
With this patch we will now output a clean, clear error message if a
client tries to manipulate the idle state of a non-graphical session.
This means we now have clear rules: "manual" idle logic for graphical
sessions, and TTY based ones for all others that have a TTY of some
form.
I considered allowing the idle state to be overriden both ways for tty
sessions but that's problematic: for sessions that are temporarily
upgraded from tty to graphical and thus suddenly want to manage their
own idle state we'd need to a way to detect when the upgrade goes away
and thus we should revert to old behaviour. Without reverting to the
previous TTY idle auto-magic we'd otherwise be stuck in an eternally
idle or eternally non-idle state, with really bad effects in case
auto-suspend is used. Thus, let's instead generate a proper error
message, saying clearly we don't support it.
(Also includes some other fixes and clean-ups in related code)
Closes: #14053
We'd just print nothing and exit with 0. If the user gave an explicit
name, we should fail. If a pattern didn't match, we should at least warn.
$ networkctl status enx54ee75cb1dc0a* --no-pager && echo $?
No interfaces matched.
0
$ networkctl status enx54ee75cb1dc0a --no-pager
Interface "enx54ee75cb1dc0a" not found.
1
When starting a mount unit, systemd invokes mount command and moves the
unit's internal state to "mounting". Then it watches for updates of
/proc/self/mountinfo. When the expected mount entry newly appears in
mountinfo, the unit internal state is changed to "mounting-done".
Finally, when systemd finds the mount command has finished, it checks
whether the unit internal state is "mounting-done" and changes the state
to "mounted".
If the state was not "mounting-done" in the last step though mount command
was successfully finished, the unit is marked as "failed" with following
log messages:
Mount process finished, but there is no mount.
Failed with result 'protocol'.
If daemon-reload is done in parallel with starting mount unit, it is
possible that things happen in following order and result in above failure.
1. the mount unit state changes to "mounting"
2. daemon-reload saves the unit state
3. kernel completes the mount and /proc/self/mountinfo is updated
4. daemon-reload restores the saved unit state, that is "mounting"
5. systemd notices the mount command has finished but the unit state
is still "mounting" though it should be "mounting-done"
mount_setup_existing_unit() should take into account that MOUNT_MOUNTING
is transitional state and set MOUNT_PROC_JUST_MOUNTED flag if the unit
comes from /proc/self/mountinfo so that mount_process_proc_self_mountinfo()
later can make state transition from "mounting" to "mounting-done".
Fixes: #10872
Primarily, use the new multi-line support in table formatting.
Also, stream-line naming of the "max-addresses" options. We used three
names for the concept internall, let's just unify on the name we use for
this for external users, i.e. "max-addresses".
In subsequent commits, calls to if_nametoindex() will be replaced by a wrapper
that falls back to alternative name resolution over netlink. netlink support
requires libsystemd (for sd-netlink), and we don't want to add any functions
that require netlink in basic/. So stuff that calls if_nametoindex() for user
supplied interface names, and everything that depends on that, needs to be
moved.
We don't need a seperate output parameter that is of type int. glibc() says
that the type is "unsigned", but the kernel thinks it's "int". And the
"alternative names" interface also uses ints. So let's standarize on ints,
since it's clearly not realisitic to have interface numbers in the upper half
of unsigned int range.
If we have a template unit template@.service, it should be allowed to specify a
dependency on a unit without an instance, bar@.service. When the unit is created,
the instance will be propagated into the target, so template@inst.service will
depend on bar@inst.service.
This commit changes unit_dependency_name_compatible(), which makes the manager
accept links like that, and unit_file_verify_alias(), so that the installation
function will agree to create a symlink like that, and finally the tests are
adjusted to pass.
This mostly reuses existing checkers used by pid1, so handling of aliases
should be consistent. Hopefully, with the test it'll be clearer what it
happening.
Support for .wants/.requires "aliases" is restored. Those are still used in the
wild quite a bit, so we need to support them.
See https://github.com/systemd/systemd/pull/13119 for a discussion of aliases
with an instance that point to a different template: this is allowed.
Will print a unit and all of its dependencies. Works with cat, status,
list-units, and list-unit-files. This flag can also be used in conjunction
with --reverse, --before, and --after.
We also vastly simplify the list_dependencies_get_dependencies logic.
Instead of using 5 strvs and merging them into one, use one strv and
have the bus append all the map values to it.
Fixes#9273
Interfaces may come up at any time, even during our initialization of
them, for various reasons; e.g. the kernel will raise VLAN when its
parent is raised; or we will raise an interface if configured with
BindCarrier and its associated interfaces come up.
When LinkLocalAddressing has been disabled for ipv6, we disable
addr_gen_mode in the kernel, so it will not automatically create a
ipv6ll address when the interface is raised. However, we currently
drop all foreign addresses before disabling addr_gen_mode.
If the link has been up for a long time, then its kernel-created ipv6ll
address will be correctly dropped. If the link is down, and stays
down until we raise it after finishing configuration, the addr_gen_mode
setting will be disabled when the interface is raised and the kernel
will not create any ipv6ll address.
However, if the interface is raised after dropping foreign config,
but before we have disabled addr_gen_mode, the kernel will create a
ipv6ll tentative address that will eventually finish DAD and become a
working ipv6ll address, even though we have been configured to disable
ipv6ll.
Moving our call to drop foreign addresses to after we have successfully
set addr_gen_mode closes this window; after we disable addr_gen_mode,
we can safely remove foreign ipv6ll addresses (including tentative ones)
and be sure that the kernel will not create any more.
Fixes: #13882.
The kernel will create an ipv6ll tentative address immediately when an
interface is raised if addr_gen_mode is not disabled; and, the kernel does
not notify netlink listeners about any tentative addresses. So it's
possible for an interface to contain tentative ipv6 link-local address(es)
that networkd doesn't know about when all foreign addresses are dropped.
In this case, networkd is later notified about the new ipv6ll address(es)
after they finish DAD and are no longer tentative; but since that's after
networkd has already dropped foreign addresses, they are incorrectly left
on the interface.
Similar to the link->setting_mtu flag, this delays continued configuration
until after the genmode has been successfully set; this is important
because we do not want networkd to raise the interface before the genmode
has been set, as if we're disabling the genmode, raising the interface
before we have successfully disabled the genmode will result in the kernel
creating a ipv6ll address, even though we don't want that.
We should allow the ones that the [Unit] section of regular unit files
may accet, but no other, in particular not the internal deps we
synthesize as reverse of explicitly configured ones, such was WantedBy=.
Fixes: #14251
When in a userns environment we cannot take away per-mount point flags
set on a mount point that was passed to us. Hence we need to be careful
to always check the actual mount flags in place and manipulate only
those flags of them that we actually want to change and not reset more
as side-effect.
We mostly got this right already in
bind_remount_recursive_with_mountinfo(), but didn't in the simpler
bind_remount_one_with_mountinfo(). Catch up.
(The old code assumed that the MountEntry.flags field contained the
right flag settings, but it actually doesn't for new mounts we just
established as for those mount() establishes the initial flags for us,
and we have to read them back to figure out which ones the kernel
picked.)
Fixes: #13622
This cleans up the function in multiple ways:
- change order of parameters to follow our usualy system of putting
return parameters last
- rename return parameter "ret" as we usually do
- don't initialize local variables we override immediately anyway
- downgrade log messages to LOG_DEBUG (since we don't log about any
other errors here above LOG_DEBUG, as this is mostly an "API"-style
function)
- handle that mnt_fs_get_vfs_options() may return NULL (according to
docs)
- manually map the ST_xyz to MS_xyz flags on statvfs(), because while
they are mostly the same, they aren't entirely the same, MS_RELATIME and
ST_RELATIME are defined differently (sad!)
It makes sense to filter state changes for some load states that
shouldn't happen, but the common cases should be accepted, because they
might happen during runtime when "systemctl daemon-reload" is issued and
unit files changed state in between. Otherwise we lose events.
Fixes: #4708
So far we set up a loopback file read-only iff ProtectSystem= and
ProtectHome= both where set to values that mark these dirs read-only.
Let's extend that and also be happy if /home and the root dir are marked
read-only by some other means.
Fixes: #14442
Similar, refuse triggering deps on units that cannot trigger.
And rework how we ignore After= dependencies on device units, to work
the same way.
See: #14142
Build option "link-networkd-shared" to build a statically linked
systemd-networkd by using
-Dlink-udev-shared=false -Dlink-networkd-shared=false
on systems with full systemd stack except systemd-networkd, such
as RHEL/CentOS 8.
To make this easier to understand, let's always log (at debug level)
when we accept or reject each device:
/swapfile: detection of swap file offset on Btrfs is not supported
/swapfile: is a candidate device.
/dev/zram0: ignoring zram swap
/dev/vdb: ignoring device with lower priority
/dev/vdc: ignoring device with lower usable space
...
If we know that hibernation will fail, refuse. This includes cases where
/sys/power/resume is set and doesn't match any device, or
/sys/power/resume_offset is set and we're not on btrfs and it doesn't match.
If /sys/power/resume is not set at all, we still accept the device with the
highest priority (see 6d176522f5 and
88bc86fcf8)
Tested cases:
1. no swap active → refuse
2. just zram swap active → refuse
3. swapfile on btrfs with /sys/power/resume{,_offset} set → OK
4. swapfile on btrfs with /sys/power/resume set, offset not set → refuse
5. swapfile on btrfs with /sys/power/resume set to nonexistent device, offset set → refuse
6. /sys/power/resume not set, offset set, candidate exists → OK (*)
7. /sys/power/resume not set, offset not set, candidate exists → OK
(*) I think this should fail, but I'm leaving that for the next commit.
Change the behavior of string arrays in a bus property map. Previously,
passing the same strv pointer to more than one map entry would result in
the old strv being freed and overwritten. With this change, an existing
strv pointer is appended to.
This is important if we want to create one strv comprised of multiple
dependencies. This makes it so callers don't have to create one strv per
dependency and subsequently merge them into one strv.
Let's add the actual unicode names of the glyphs we use. Let's also add
in comments what the width expectations of these glyphs are on the
console.
Also, remove the "mdash" definition. First of all it wasn't used, but
what's worse the glyph encoded was actually an "ndash"...
Fixes: #14075
Previously, when first connecting to the bus after connecting to it we'd
issue a ListNames() bus call to the driver to figure out which bus names
are currently active. This information was then used to initialize the
initial state for services that use BusName=.
This change removes the whole code for this and replaces it with
something vastly simpler.
First of all, the ListNames() call was issues synchronosuly, which meant
if dbus was for some reason synchronously calling into PID1 for some
reason we'd deadlock. As it turns out there's now a good chance it does:
the nss-systemd userdb hookup means that any user dbus-daemon resolves
might result in a varlink call into PID 1, and dbus resolves quite a lot
of users while parsing its policy. My original goal was to fix this
deadlock.
But as it turns out we don't need the ListNames() call at all anymore,
since #12957 has been merged. That PR was supposed to fix a race where
asynchronous installation of bus matches would cause us missing the
initial owner of a bus name when a service is first started. It fixed it
(correctly) by enquiring with GetOwnerName() who currently owns the
name, right after installing the match. But this means whenever we start watching a bus name we anyway
issue a GetOwnerName() for it, and that means also when first connecting
to the bus we don't need to issue ListNames() anymore since that just
tells us the same info: which names are currently owned.
hence, let's drop ListNames() and instead make better use of the
GetOwnerName() result: if it failed the name is not owned.
Also, while we are at it, let's simplify the unit's owner_name_changed()
callback(): let's drop the "old_owner" argument. We never used that
besides logging, and it's hard to synthesize from just the return of a
GetOwnerName(), hence don't bother.
When a service unit watches a bus name (i.e. because of BusName= being
set), then we do two things: we install a match slot to watch how its
ownership changes, and we inquire about the current owner. Make sure we
always do both together or neither.
This in particular fixes a corner-case memleak when destroying bus
connections, since we never freed the GetNameOwner() bus slots when
destroying a bus when they were still ongoing.
