We already shut the machine down ourselves (and pid1 will also do
cleanup for us after we exit if anything was left behind). No need for
systemd-machined to try to stop the unit too.
(This calls the new machined method. If we are running against an older
machined, we will not deregister the machine. If we are simply exiting,
machined should notice that the unit is gone on its own. If we are restarting,
we will fail to register the machine after restart and fail. But this case
was already broken, because machined would create a stop job, breaking the
restart. So not doing anything with old machined should not make anything
more broken than it already is.)
Fixes#13766.
See https://bugzilla.redhat.com/show_bug.cgi?id=1763488: when we say that
'foo@*.service' is not a valid unit name, this is not clear enough. Let's
include the name of the operation that does not support globbing in the
error message:
$ build/systemctl enable 'foo@*.service'
Glob pattern passed to enable, but globs are not supported for this.
Invalid unit name "foo@*.service" escaped as "foo@\x2a.service".
...
This is a pretty large patch, and adds support for OCI runtime bundles
to nspawn. A new switch --oci-bundle= is added that takes a path to an
OCI bundle. The JSON file included therein is read similar to a .nspawn
settings files, however with a different feature set.
Implementation-wise this mostly extends the pre-existing Settings object
to carry additional properties for OCI. However, OCI supports some
concepts .nspawn files did not support yet, which this patch also adds:
1. Support for "masking" files and directories. This functionatly is now
also available via the new --inaccesible= cmdline command, and
Inaccessible= in .nspawn files.
2. Support for mounting arbitrary file systems. (not exposed through
nspawn cmdline nor .nspawn files, because probably not a good idea)
3. Ability to configure the console settings for a container. This
functionality is now also available on the nspawn cmdline in the new
--console= switch (not added to .nspawn for now, as it is something
specific to the invocation really, not a property of the container)
4. Console width/height configuration. Not exposed through
.nspawn/cmdline, but this may be controlled through $COLUMNS and
$LINES like in most other UNIX tools.
5. UID/GID configuration by raw numbers. (not exposed in .nspawn and on
the cmdline, since containers likely have different user tables, and
the existing --user= switch appears to be the better option)
6. OCI hook commands (no exposed in .nspawn/cmdline, as very specific to
OCI)
7. Creation of additional devices nodes in /dev. Most likely not a good
idea, hence not exposed in .nspawn/cmdline. There's already --bind=
to achieve the same, which is the better alternative.
8. Explicit syscall filters. This is not a good idea, due to the skewed
arch support, hence not exposed through .nspawn/cmdline.
9. Configuration of some sysctls on a whitelist. Questionnable, not
supported in .nspawn/cmdline for now.
10. Configuration of all 5 types of capabilities. Not a useful concept,
since the kernel will reduce the caps on execve() anyway. Not
exposed through .nspawn/cmdline as this is not very useful hence.
Note that this only implements the OCI runtime logic itself. It does not
provide a runc-compatible command line tool. This is left for a later
PR. Only with that in place tools such as "buildah" can use the OCI
support in nspawn as drop-in replacement.
Currently still missing is OCI hook support, but it's already parsed and
everything, and should be easy to add. Other than that it's OCI is
implemented pretty comprehensively.
There's a list of incompatibilities in the nspawn-oci.c file. In a later
PR I'd like to convert this into proper markdown and add it to the
documentation directory.
We have the machine name anyway, let's use TerminateMachine() on
machined's Manager object directly with it. That way it's a single
method call only, instead of two, to terminate the machine.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
The warning is not emitted for absolute paths like /dev/sda or /home, which are
converted to .device and .mount unit names without any fuss.
Most of the time it's unlikely that users use invalid unit names on purpose,
so let's warn them. Warnings are silenced when --quiet is used.
$ build/systemctl show -p Id hello@foo-bar/baz
Invalid unit name "hello@foo-bar/baz" was escaped as "hello@foo-bar-baz" (maybe you should use systemd-escape?)
Id=hello@foo-bar-baz.service
$ build/systemd-run --user --slice foo-bar/baz --unit foo-bar/foo true
Invalid unit name "foo-bar/foo" was escaped as "foo-bar-foo" (maybe you should use systemd-escape?)
Invalid unit name "foo-bar/baz" was escaped as "foo-bar-baz" (maybe you should use systemd-escape?)
Running as unit: foo-bar-foo.service
Fixes#8302.
Since time began, scope units had a concept of "Controllers", a bus peer
that would be notified when somebody requested a unit to stop. None of
our code used that facility so far, let's change that.
This way, nspawn can print a nice message when somebody invokes
"systemctl stop" on the container's scope unit, and then react with the
right action to shut it down.
Previously, only when --register=yes was set (the default) the invoked
container would get its own scope, created by machined on behalf of
nspawn. With this change if --register=no is set nspawn will still get
its own scope (which is a good thing, so that --slice= and --property=
take effect), but this is not done through machined but by registering a
scope unit directly in PID 1.
Summary:
--register=yes → allocate a new scope through machined (the default)
--register=yes --keep-unit → use the unit we are already running in an register with machined
--register=no → allocate a new scope directly, but no machined
--register=no --keep-unit → do not allocate nor register anything
Fixes: #5823
If a source path is prefixed with "+" it is taken relative to the container's
root directory instead of the host. This permits easily establishing bind and
overlay mounts based on data from the container rather than the host.
This also reworks custom_mounts_prepare(), and turns it into two functions: one
custom_mount_check_all() that remains in nspawn.c but purely verifies the
validity of the custom mounts configured. And one called
custom_mount_prepare_all() that actually does the preparation step, sorts the
custom mounts, resolves relative paths, and allocates temporary directories as
necessary.
https://github.com/systemd/systemd/pull/3685 introduced
/run/systemd/inaccessible/{chr,blk} to map inacessible devices,
this patch allows systemd running inside a nspawn container to create
/run/systemd/inaccessible/{chr,blk}.
Previously we'd have generally useful sd-bus utilities in bust-util.h,
intermixed with code that is specifically for writing clients for PID 1,
wrapping job and unit handling. Let's split the latter out and move it into
bus-unit-util.c, to make the sources a bit short and easier to grok.
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the
soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but
they'd implicitly spill into the soft hard rlimits.
This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to
serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is
now moved into the function itself. This has the benefit of shortening the calling code.
As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes
where that's appropriate.
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
We were hardcoding "systemd-nspawn" as the value of the $container env
variable and "nspawn" as the service string in machined registration.
This commit allows the user to configure it by setting the
$SYSTEMD_NSPAWN_CONTAINER_SERVICE env variable when calling
systemd-nspawn.
If $SYSTEMD_NSPAWN_CONTAINER_SERVICE is not set, we use the string
"systemd-nspawn" for both, fixing the previous inconsistency.
