This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
This allows us to later port nss-resolve to use Varlink rather than
D-Bus for resolution. This has the benefit that nss-resolve based
resoluton works even without D-Bus being up. And it's faster too.
Meson does not care either way, so let's use the simpler syntax. And files()
already gives a list, so nesting this in a list wouldn't be necessary even
if meson did not flatten everything.
This provides basic OpenSSL support without optimizations like TCP Fast Open and TLS Session Tickets.
Notice only a single SSL library can be enabled at a time and therefore journald functions provided by GnuTLS will be disabled when using OpenSSL.
Fixes#9531
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This turns resolve-tool into a multi-call binary. When invoked as
"resolvconf" it provides minimal compatibility with the resolvconf(8)
tool of various distributions (and FreeBSD as it appears).
This new interface understands to varying degrees features of the two
major implementations of resolvconf(8): Debian's original one and
"openresolv". Specifically:
Fully supported:
-a -d (supported by all implementations)
-f (introduced by openresolv)
Somewhat supported:
-x (introduced by openresolv, mapped to a '~.' domain entry)
Unsupported and ignored:
-m -p (introduced by openresolv, not really necessary for us)
Unsupported and resulting in failure:
-u (supported by all other implementations)
-I -i -l -R -r -v -V
(all introduced by openresolv)
--enable-updates --disable-updates --updates-are-enabled
(specific to Debian's implementation)
Of course, resolvconf(8) is a tool with multiple backends, in our
implementation systemd-resolved is the only backend.
Fixes: #7202
Those files don't contain any @variables@, so the configuration step was just
copying them to build/. Let's avoid that, and fix their suffixes while at it.
This reduces the man=false meson target count from 1281 to 1253.
--
A fully scientific test:
git grep _sources, :/*.build|cut -d: -f2|tr -d ' '|sort|uniq -c
reveals that libudev_sources is the only source list now reused twice. There's
some ugly circular dependency between libudev and libshared, and anyway I'm not
sure if we don't want to use different compilation options (LOG_REALM_…) in
those two cases, so I'm leaving that alone for now.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
Also detect libgpg-error. Require both to be present for HAVE_CRYPT,
even though libgpg-error is only used in src/resolve. If one is available,
the other should be too, so it doesn't seem worth the trouble to make two
separate conditions.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This simplifies things and leads to a smaller installation footprint.
libsystemd_internal and libsystemd_journal_internal are linked into
libystemd-shared and available to all programs linked to libsystemd-shared.
libsystemd_journal_internal is not needed anymore, and libsystemd-shared
is used everwhere. The few exceptions are: libsystemd.so, test-engine,
test-bus-error, and various loadable modules.
With mesonbuid/meson#1545, meson does not propagate deps of a library
when linking with that library. That's of course the right thing to do,
but it exposes a bunch of missing deps.
This compiles with both meson-0.39.1 and meson-git + pr/1545.
Tests can be run with 'ninja-build test' or using 'mesontest'.
'-Dtests=unsafe' can be used to include the "unsafe" tests in the
test suite, same as with autotools.
v2:
- use more conf.get guards are optional components
- declare deps on generated headers for test-{af,arphrd,cap}-list
v3:
- define environment for tests
Most test don't need this, but to be consistent with autotools-based build, and
to avoid questions which tests need it and which don't, set the same environment
for all tests.
v4:
- rework test generation
Use a list of lists to define each test. This way we can reduce the
boilerplate somewhat, although the test listings are still pretty verbose. We
can also move the definitions of the tests to the subdirs. Unfortunately some
subdirs are included earlier than some of the libraries that test binaries
are linked to. So just dump all definitions of all tests that cannot be
defined earlier into src/test. The `executable` definitions are still at the
top level, so the binaries are compiled into the build root.
v5:
- tag test-dnssec-complex as manual
v6:
- fix HAVE_LIBZ typo
- add missing libgobject/libgio defs
- mark test-qcow2 as manual
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
Jörg Thalheim