":" is prettier, but meson 0.56+ doesn't like it:
src/systemd/meson.build:73: DEPRECATION: ":" is not allowed in test name "cc-sd-bus.h:c", it has been replaced with "_"
src/systemd/meson.build:73: DEPRECATION: ":" is not allowed in test name "cc-sd-bus.h:c-ansi", it has been replaced with "_"
...
Fixes#17568.
With these patches applied, networkd is successfully able to get an
address from a DHCP server on an IPoIB interface.
1)
Makes networkd pass the actual interface type to the dhcp client,
instead of hardcoding it to Ethernet.
2)
Fixes some issues in handling the larger (20 Byte) IB MAC addresses in
the dhcp code.
3)
Add a new field to networkds Link struct, which holds the interface
broadcast address.
3.1)
Modify the DHCP code to also expect the broadcast address as parameter.
On an Ethernet-Interface the Broadcast address never changes and is always
all 6 bytes set to 0xFF.
On an IB one however it is not neccesarily always the same, thus
fetching the actual address from the interface is neccesary.
4)
Only the last 8 bytes of an IB MAC are stable, so when using an IB MAC to
generate a client ID, only pass those 8 bytes.
Currently, if an event source callback returns an error, we'll disable
the event source and continue. This adds a per-event source flag that if
turned on goes further: the event loop is also exited, propagating the
error code.
This is inspired by some patterns repeatedly seen in #15206.
The idea is that event sources that server the "primary" function of a
program are marked like this, so that if they fail the failure is
instantly propagated and terminates the program.
KEY_RESTART is widely used in Linux to indicate device reboot.
So lets handle it in the same fashion as KEY_POWER.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
sd_seat_get_sessions() would return 0 in the 'n_uids' (now 'ret_n_uids') output
parameter when 'uid' (now 'ret_uids') was passed as NULL.
While at it, drop FOREACH_WORD() use.
Also use any whitespace as separator. In practice this shouldn't matter, since
logind always uses spaces, but it seems nicer to not specify this explicitly,
and the default is more flexible.
So far we kept all defines directly originating from the spec in
sd-bus-protocol.h, do this for this too.
The precise place doesn't matter much API-wise given that sd-bus.h includes
sd-bus-protocol.h, hence let's just clean this up.
This tries to address the "bind"/"unbind" uevent kernel API breakage, by
changing the semantics of device tags.
Previously, tags would be applied on uevents (and the database entries
they result in) only depending on the immediate context. This means that
if one uevent causes the tag to be set and the next to be unset, this
would immediately effect what apps would see and the database entries
would contain each time. This is problematic however, as tags are a
filtering concept, and if tags vanish then clients won't hence notice
when a device stops being relevant to them since not only the tags
disappear but immediately also the uevents for it are filtered including
the one necessary for the app to notice that the device lost its tag and
hence relevance.
With this change tags become "sticky". If a tag is applied is once
applied to a device it will stay in place forever, until the device is
removed. Tags can never be removed again. This means that an app
watching a specific set of devices by filtering for a tag is guaranteed
to not only see the events where the tag is set but also all follow-up
events where the tags might be removed again.
This change of behaviour is unfortunate, but is required due to the
kernel introducing new "bind" and "unbind" uevents that generally have
the effect that tags and properties disappear and apps hence don't
notice when a device looses relevance to it. "bind"/"unbind" events were
introduced in kernel 4.12, and are now used in more and more subsystems.
The introduction broke userspace widely, and this commit is an attempt
to provide a way for apps to deal with it.
While tags are now "sticky" a new automatic device property
CURRENT_TAGS is introduced (matching the existing TAGS property) that
always reflects the precise set of tags applied on the most recent
events. Thus, when subscribing to devices through tags, all devices that
ever had the tag put on them will be be seen, and by CURRENT_TAGS it may
be checked whether the device right at the moment matches the tag
requirements.
See: #7587#7018#8221
The commit 1070d271fa which was supposed
too fix this does not seem to take effect any more. We get again 34%
compilation success rate while scanning systemd itself. Moreover, the
installed header file breaks compilation of programs that include it:
"/usr/include/systemd/_sd-common.h", line 23: error #35: #error directive: "Do
not include _sd-common.h directly; it is a private header."
# error "Do not include _sd-common.h directly; it is a private header."
^
We frequently want to set a timer relative to the current time. Let's
add an explicit API for this. This not only saves us a few lines of code
everywhere and simplifies things, but also allows us to do correct
overflow checking.
SD_JOURNAL_FOREACH_DATA() and SD_JOURNAL_FOREACH_UNIQUE() would immediately
terminate when a field couldn't be accessed. This can happen for example when a
field is compressed with an unavailable compression format. But it's likely
that this is the wrong thing to do: the caller for example might want to
iterate over the fields but isn't interested in all of them. coredumpctl is
like this: it uses SD_JOURNAL_FOREACH_DATA() but only uses a subset of the
fields.
Add two new functions sd_journal_enumerate_good_data() and
sd_journal_enumerate_good_unique() that retry sd_journal_enumerate_data() and
sd_journal_enumerate_unique() if the return value is something that applies to
a single field: ENOBUS, E2BIG, EOPNOTSUPP.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1856037.
An alternative would be to make the macros themselves smarter instead of adding
new symbols, and do the looping internally in the macro. I don't like that
approach for two reasons. First, it would embed the logic in the macro, so
recompilation would be required if we decide to update the logic. With the
current version of the patch, recompilation is required to use the new symbols,
but after that, library upgrades are enough. So the current approach is safer
in case further updates are needed. Second, our headers use primitive C, and it
is hard to do the macros without using newer features.
Let's add a catalog entry explaining further details.
Most importantly though: talk to PID 1 directly, via the private D-Bus
socket, so that this actually works correctly during early boot, where
D-Bus is not around.
While investigating https://github.com/systemd/systemd/issues/16356, I
discovered that networkd stops the radv service before adding or updating
prefixes and then starts it again. This causes networkd to send an RA with
a router lifetime of zero, causing the routes to flap on systems receiving
the RA for a fraction of a second before radv is started again and proper
RAs are sent. That has the potential to cause issues with latency-sensitive
traffic like gaming or VoIP. This patch adds a boolean argument to the
sd_radv_stop() function to control this behavior. The zero lifetime RA is
still sent whenever radv is actually being stopped, but when it is being
restarted for a prefix update (from networkd-dhcp6.c), the final RA is no
longer sent to avoid the route flapping.
This is an attempt to clean up the POP3/SMTP/LPR/… DHCP lease server
data logic in networkd. This reduces code duplication and fixes a number
of bugs.
This removes any support for collecting POP3/SMPT/LPR servers acquired
via local DHCP client releases since noone uses that, and given how old
these protocols are I doubt this will change. It keeps support for
configuring them for the dhcp server however.
The differences between the DNS/NTP/SIP/POP3/SMTP/LPR configuration
logics are minimized.
This removes the relevant symbols from sd-network.h (which is an
internal API only at this point after all).
This is unfortunately not well test, given the old code for this had
barely any tests. But the new code should not perform worse at least,
and allow us to release, since it corrects some interfaces visible in
the .network configuration format.
Fixes: #15943
This is an attempt to clean-up the DHCP lease server type code a bit. We
now strictly use the same enum everywhere, and store server info in an
array. Moreover, we use the same nomenclature everywhere.
This only makes the changes in the sd-dhcp code. The networkd code is
untouched so far (but should be fixed up like this too. But it's more
complicated since this would then touch actual settings in .network
files).
Note that this also changes some field names in serialized lease files.
But given that these field names have not been part of a released
version of systemd yet, such a change should be ok.
This is pure renaming/refactoring, shouldn't actually change any
behaviour.
RFC: 8415
21.17. Vendor-specific Information Option
This option is used by clients and servers to exchange vendor-
specific information.
The format of the Vendor-specific Information option is:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| OPTION_VENDOR_OPTS | option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| enterprise-number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. vendor-option-data .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 30: Vendor-specific Information Option Format
option-code OPTION_VENDOR_OPTS (17).
option-len 4 + length of vendor-option-data field.
enterprise-number The vendor's registered Enterprise Number as
maintained by IANA [IANA-PEN]. A 4-octet
field containing an unsigned integer.
vendor-option-data Vendor options, interpreted by
vendor-specific code on the clients and
servers. A variable-length field (4 octets
less than the value in the option-len field).
The definition of the information carried in this option is vendor
specific. The vendor is indicated in the enterprise-number field.
Use of vendor-specific information allows enhanced operation,
utilizing additional features in a vendor's DHCP implementation. A
DHCP client that does not receive requested vendor-specific
information will still configure the node's IPv6 stack to be
functional.
The vendor-option-data field MUST be encoded as a sequence of
code/length/value fields of format identical to the DHCP options (see
Section 21.1). The sub-option codes are defined by the vendor
identified in the enterprise-number field and are not managed by
IANA. Each of the sub-options is formatted as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| sub-opt-code | sub-option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. sub-option-data .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 31: Vendor-specific Options Format
sub-opt-code The code for the sub-option. A 2-octet
field.
sub-option-len An unsigned integer giving the length of the
sub-option-data field in this sub-option in
octets. A 2-octet field.
sub-option-data The data area for the sub-option. The
length, in octets, is specified by
sub-option-len.
Multiple instances of the Vendor-specific Information option may
appear in a DHCP message. Each instance of the option is interpreted
according to the option codes defined by the vendor identified by the
Enterprise Number in that option. Servers and clients MUST NOT send
more than one instance of the Vendor-specific Information option with
the same Enterprise Number. Each instance of the Vendor-specific
Information option MAY contain multiple sub-options.
A client that is interested in receiving a Vendor-specific
Information option:
- MUST specify the Vendor-specific Information option in an Option
Request option.
- MAY specify an associated Vendor Class option (see Section 21.16).
- MAY specify the Vendor-specific Information option with
appropriate data.
Servers only return the Vendor-specific Information options if
specified in Option Request options from clients and:
- MAY use the Enterprise Numbers in the associated Vendor Class
options to restrict the set of Enterprise Numbers in the
Vendor-specific Information options returned.
- MAY return all configured Vendor-specific Information options.
- MAY use other information in the packet or in its configuration to
determine which set of Enterprise Numbers in the Vendor-specific
Information options to return.
Clean up the naming of the sd-path enums. Previously, the more recently
added fields where named in the form SD_PATH_xyz_DIR and
SD_PATH_xyz_PATH, while the older fields where called just SD_PATH_xyz
and SD_PATH_SEARCH_xyz. Let's clean this up, to come to a more unified
way how we name this stuff.
I opted to stick to the old naming, i.e. dropthe suffixes. It's a bit of
a bike-shedding question of course, but I think there's a good reason to
avoid the additional DIR and PATH suffixes: the enum prefix contains
"PATH" anyway (i.e. "SD_PATH_"), so including PATH twice in each name is
redundant. Moreover, the key difference between the enums with the "dir"
and the "path" in the name is that the latter are *seach* paths, and I
think this is better emphasized by sticking to the "SEARCH" in the name.
Moreover dropping the suffixes makes the identifiers a lot shorter, in
particular in the "systemd-path" list output. And that's always good.
This means the naming pkgconfig file and in sd-path slightly deviate
(though the mapping is very simple), but I think that's OK, given that
this is developer facing and not user facing.
Whenever we pick up a new line in /proc/self/mountinfo and want to
synthesize a new mount unit from it, let's say which one it is.
Moreover, downgrade the log message when we encounter a mount point with
an overly long name to LOG_WARNING, since it's generally fine to ignore
such mount points.
Also, attach a catalog entry to explain the situation further.
Prompted-By: #15221
Those are fairly trivial to reimplement, but any non-trivial user of sd-bus
is likely to need them. So let's expose them to save everyone the trouble.
I'm keeping the internal functions and making the public ones thin wrappers,
because for the internal uses we don't need the additional asserts, and also we
can't expose _pure_ annotation easily, and dropping it would likely make the
compiled code a bit less efficient.
Zbigniew Jędrzejewski-Szmek