This temporarily blacklists some tests when run under Ubuntu CI.
This is the upstream side of the Debian 'upstream' test MR:
https://salsa.debian.org/systemd-team/systemd/merge_requests/52
The tests blacklisted here should only be temporarily blacklisted
until they can be fixed; the intention is that these blacklist files
will be added and removed over time while debugging/fixing flaky
and/or regressed tests, without causing test failure noise for other
PRs.
v2:
- if RestartKillSignal= is not specified, fall back to KillSignal=. This is necessary
to preserve backwards compatibility (and keep KillSignal= generally useful).
We should never have used an unprefixed environment variable name.
All other systemd-nspawn variables have the "SYSTEMD_NSPAWN_" prefix,
and all other systemd variables have the "SYSTEMD_" prefix.
The new variable name takes precedence, but we fall back to checking the
old one. If only the old one is found, a warning is emitted.
In addition, SYSTEMD_NSPAWN_UNIFIED_HIERARCHY="" is accepted as an override
to avoid looking for the old variable name.
We have a variable with the same name ($UNIFIED_CGROUP_HIERARCHY) in tests,
which governs both systemd-nspawn and qemu behaviour. It is not renamed.
IPServiceType set to CS6 (network control) causes problems on some old
network setups that continue to interpret the field as IP TOS.
Make DHCP work on such networks by allowing this field to be set to
CS4 (Realtime) instead, as this maps to IPTOS_LOWDELAY.
Signed-off-by: Siddharth Chandrasekaran <csiddharth@vmware.com>
The "Ex" variant was originally only added for ExecStartXYZ= but it makes
sense to have feature parity for the rest of the exec command properties
as well (e.g. ExecReload=, ExecStop=, etc).
When nspawn container with private network starts, networkd creates
the default route for the interface. The route may cause problem on
the host side, and it can be created with DefaultRouteOnDevice= now.
Hence, this makes networkd not create the route implicitly any more.
Closes#13418.
Add a fido_id program meant to be run for devices in the hidraw
subsystem via an IMPORT directive. The program parses the HID report
descriptor and assigns the ID_SECURITY_TOKEN environment variable if a
declared usage matches the FIDO_CTAPHID_USAGE declared in the FIDO CTAP
specification. This replaces the previous approach of whitelisting all
known security token models manually.
This commit is accompanied by a test suite and a fuzzer target for the
descriptor parsing routine.
Fixes: #11996.
*We* control the sysctl setting. If the user configured IPv6, then we apply the
settings, and just make sure that at some point during the configuration the
sysctl is disabled (i.e. ipv6 enabled) if we have IPv6 configured.
Replaces #13283.
This test runs under qemu, which may run on some testbeds without
acceleration; in those cases, a 10s timeout is frequently too short.
Simply removing the timeout to allow the default timeoutsec should
be enough time for the test to finish, even on very slow testbeds.
This avoids unnecessary noise in the stderr logs which dd always produces,
such as:
0+0 records in
0+0 records out
0 bytes copied, 0.000155284 s, 0.0 kB/s
Using truncate should not result in any functional change; the image will
still be created as a sparse file of the size specified.
In Ubuntu CI, we test binaries from the installed system, not from
$BUILD_DIR, so use the appropriate binary. Most of the calls to the
binaries are part of checking/processing asan-built binaries, and so
did not apply to Ubuntu CI, except for generating noise in the stderr
log like:
objdump: '/tmp/autopkgtest.83yGoI/build.fHB/src/test/TEST-01-BASIC/systemd-journald': No such file
However this also applies to the call to systemd-nspawn, which the debian
upstream test wrapper was sed-adjusting to use the installed binary
instead of the binary in $BUILD_DIR. This commit allows removing that
sed processing of the test-functions file during Ubuntu CI test.
These tests runs under qemu, and on some testbeds, without acceleration.
On those systems, the current 180 second overall test timeout is too
short to run the test.
Increasing the timeout to 600s should be enough, even for slow
non-accelerated qemu testbeds.
This dir is created by create_empty_image_rootdir, as well as indirectly
by some other functions, but it should be created by import_initdir so
the newly-exported $initdir exists and can be used immediately without
relying on other functions to create it.
Only umount it during cleanup if the $TESTDIR/root dir is a mountpoint.
This avoids adding noise to the stderr log such as:
mountpoint: /var/tmp/systemd-test.waLOFT/root: No such file or directory
To make debugging much easier, especially for crashes in tests under
QEMU, let's store the entire coredump bundle in the systemd journal,
which is usually kept around by various CIs. Right now, we usually end
up with a journal, but without the coredump itself, which is pretty
useless.
Otherwise, changing the default gateway doesn't purge old gateway routes
left on the system during daemon restart. This also fixes removing other
foreign gateway routes that don't match the expected configuration.
Tested:
Changed gateway addresses prior to the patch and they lingered on
the system during each reconfiguration. Applied this patch and
reconfigured gateways and other routes multiple times and it removed
the foreign routes that had gateways that didn't match.
Signed-off-by: William A. Kennington III <william@wkennington.com>
The `coproc` implementation seems to be a little bit different in older
bash versions, so the `strace` is sometimes started AFTER `systemctl
daemon-reload`, which causes unexpected fails. Let's help it a little by
sleeping for a bit.
The MPOL_LOCAL constant is not recognized in current strace versions.
Let's match at least the numerical value of this constant until the
strace patch is approved & merged.
If networkctl crashes, like recently with SIGABRT, it returns absolutely
no output, which may be confusing during debugging. Help it a little
with a short informative message.
`adduser` is in certain cases a standalone package which provides a
better user experience. In other cases it's just a symlink to `useradd`.
And some distributions don't have `adduser` at all, like Arch Linux.
Let's use the `useradd` binary instead, which should provide the same
functionality everywhere.
This reworks how we load units from disk. Instead of chasing symlinks every
time we are asked to load a unit by name, we slurp all symlinks from disk
and build two hashmaps:
1. from unit name to either alias target, or fragment on disk
(if an alias, we put just the target name in the hashmap, if a fragment
we put an absolute path, so we can distinguish both).
2. from a unit name to all aliases
Reading all this data can be pretty costly (40 ms) on my machine, so we keep it
around for reuse.
The advantage is that we can reliably know what all the aliases of a given unit
are. This means we can reliably load dropins under all names. This fixes#11972.
I adjusted the tests to pass. I don't think the behaviour makes much sense,
even if we ignore the issue with "lazy loading" of aliases. E.g. in the
last section, the fact that dropins for yup@.service and yup@3.service are
not loaded seems to be a plain old bug.
This option is only used on reboot, not on other types of shutdown
modes, so it is misleading.
Keep the old name working for backward compatibility, but remove it
from the documentation.
Rather than always enabling the shutdown WD on kexec, which might be
dangerous in case the kernel driver and/or the hardware implementation
does not reset the wd on kexec, add a new timer, disabled by default,
to let users optionally enable the shutdown WD on kexec separately
from the runtime and reboot ones. Advise in the documentation to
also use the runtime WD in conjunction with it.
Fixes: a637d0f9ec ("core: set shutdown watchdog on kexec too")
It seems that old kernels do not support prefix routes with
non-default route tables. This adds a fallback logic when adding route
fails. In that case, prefix route is created by kernel and the default
route table is used.
Some distros install nologin as /usr/sbin/nologin, others as
/sbin/nologin.
Since we can't really on merged-usr everywhere (where the path wouldn't
matter), make the path build time configurable via -Dnologin-path=.
Closes#13028
without using -type f, the logs print an error such as:
E: E: modprobe: FATAL: Module asymmetric_keys not found in directory /lib/modules/4.15.0-54-generic
while this doesn't appear to cause problems, it can be extremely
distracting when trying to debug real failures.
Almost all tests were manually mounting/unmounting $TESTDIR/root
from the loopback image; this moves all that into test-functions
so the test setup functions are simplier.
Also add test_setup_cleanup() function, to cleanup what is mounted
by create_empty_image_rootdir()
