Those are fairly trivial to reimplement, but any non-trivial user of sd-bus
is likely to need them. So let's expose them to save everyone the trouble.
I'm keeping the internal functions and making the public ones thin wrappers,
because for the internal uses we don't need the additional asserts, and also we
can't expose _pure_ annotation easily, and dropping it would likely make the
compiled code a bit less efficient.
```
21.16. Vendor Class Option
This option is used by a client to identify the vendor that
manufactured the hardware on which the client is running. The
information contained in the data area of this option is contained in
one or more opaque fields that identify details of the hardware
configuration. The format of the Vendor Class option is:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| OPTION_VENDOR_CLASS | option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| enterprise-number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. vendor-class-data .
. . . . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 28: Vendor Class Option Format
option-code OPTION_VENDOR_CLASS (16).
option-len 4 + length of vendor-class-data field.
enterprise-number The vendor's registered Enterprise Number as
maintained by IANA [IANA-PEN]. A 4-octet
field containing an unsigned integer.
vendor-class-data The hardware configuration of the node on
which the client is running. A
variable-length field (4 octets less than the
value in the option-len field).
The vendor-class-data field is composed of a series of separate
items, each of which describes some characteristic of the client's
hardware configuration. Examples of vendor-class-data instances
might include the version of the operating system the client is
running or the amount of memory installed on the client.
Each instance of vendor-class-data is formatted as follows:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+
| vendor-class-len | opaque-data |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+
Figure 29: Format of vendor-class-data Field
The vendor-class-len field is 2 octets long and specifies the length
of the opaque vendor-class-data in network byte order.
Servers and clients MUST NOT include more than one instance of
OPTION_VENDOR_CLASS with the same Enterprise Number. Each instance
of OPTION_VENDOR_CLASS can carry multiple vendor-class-data
instances.
```
sd-network: DHCPv6 - add support to send userclass option
21.15. User Class Option
The User Class option is used by a client to identify the type or
category of users or applications it represents.
The format of the User Class option is:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| OPTION_USER_CLASS | option-len |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. .
. user-class-data .
. .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 26: User Class Option Format
option-code OPTION_USER_CLASS (15).
option-len Length of user-class-data field.
user-class-data The user classes carried by the client. The
length, in octets, is specified by
option-len.
The information contained in the data area of this option is
contained in one or more opaque fields that represent the user class
or classes of which the client is a member. A server selects
configuration information for the client based on the classes
identified in this option. For example, the User Class option can be
used to configure all clients of people in the accounting department
with a different printer than clients of people in the marketing
department. The user class information carried in this option MUST
be configurable on the client.
The data area of the User Class option MUST contain one or more
instances of user-class-data information. Each instance of
user-class-data is formatted as follows:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+
| user-class-len | opaque-data |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+
Figure 27: Format of user-class-data Field
Let's use size_t for numbers of entries in memory.
Let's use const wherever appropriate.
Drop `_server` suffix from function name where we don't have it for
similar other cases.
When set, the offset specified for the vtable entry is passed to the
handler as-is, and is not added to the userdata pointer. This is useful
in case methods/properties are mixed on the same vtable, that expect to
operate relative to some object in memory and that expect pointers to
absolute memory, or that just want a number passed.
This adds the sd_notify_barrier function, to allow users to synchronize against
the reception of sd_notify(3) status messages. It acts as a synchronization
point, and a successful return gurantees that all previous messages have been
consumed by the manager. This can be used to eliminate race conditions where
the sending process exits too early for systemd to associate its PID to a
cgroup and attribute the status message to a unit correctly.
systemd-notify now uses this function for proper notification delivery and be
useful for NotifyAccess=all units again in user mode, or in cases where it
doesn't have a control process as parent.
Fixes: #2739
This reworks the user validation infrastructure. There are now two
modes. In regular mode we are strict and test against a strict set of
valid chars. And in "relaxed" mode we just filter out some really
obvious, dangerous stuff. i.e. strict is whitelisting what is OK, but
"relaxed" is blacklisting what is really not OK.
The idea is that we use strict mode whenver we allocate a new user
(i.e. in sysusers.d or homed), while "relaxed" mode is when we process
users registered elsewhere, (i.e. userdb, logind, …)
The requirements on user name validity vary wildly. SSSD thinks its fine
to embedd "@" for example, while the suggested NAME_REGEX field on
Debian does not even allow uppercase chars…
This effectively liberaralizes a lot what we expect from usernames.
The code that warns about questionnable user names is now optional and
only used at places such as unit file parsing, so that it doesn't show
up on every userdb query, but only when processing configuration files
that know better.
Fixes: #15149#15090
Consumers of the sd-bus convenience API can't make convenience
helpers of their own without va_list variants.
This commit is a mechanical change splitting out the existing function
bodies into bare va_list variants having a 'v' suffixed to the names.
The original functions now simply create the va_list before forwarding
the call on to the va_list variant, and the va_list variants dispense
with those steps.
So far we had various ad hoc APIs to query search paths:
systemd-analyze unit-paths, lookup_paths_log(), the pkgconfig file,
debug logs emitted by systemd-analyze cat-config.
But answering a simple question "what is the search path for tmpfiles,
sysusers, .network files, ..." is surprisingly hard.
I think we should have an api that makes it easy to query this. Pkgconfig is
not bad, but it is primarily a development tool, so it's not available in many
context. Also it can't provide support for paths which are influenced by
environment variables, and I'd like to be able to answer the question "what is
the search path for ..., assuming that VAR_FOO=... is set?".
Extending sd-path to support more of our internal paths seems to be most
flexible solution. We already have systemd-path which provides a nice
way to query, and we can add stuff like optional descriptions later on.
We we essentially get a nice programmatic and commmandline apis for the price
of one.
I think the two names were both pretty bad. They did not give a proper hint
what the difference between the two functions is, and sd_path_home sounds like
it is somehow related to /home or home directories or whatever, when in fact
both functions return the same set of paths as either a colon-delimited string
or a strv. "_strv" suffix is used by various functions in sd-bus, so let's
reuse that.
Those functions are not public yet, so let's rename.
When specifying `DHCPv4.SendOption=`, it is used by systemd-networkd to
set the value of that option within the DHCP request that is sent out.
This differs to setting `DHCPServer.SendOption=`, which will place all
the options together as suboptions into the vendor-specific information
(code 43) option.
This commit adds two new config options, `DHCPv4.SendVendorOption=` and
`DHCPServer.SendVendorOption=`. These both have the behaviour of the old
`DHCPServer.SendOption=` flag, and set the value of the suboption in the
vendor-specific information option.
The behaviour of `DHCPServer.SendOption=` is then changed to reflect
that of `DHCPv4.SendOption=`. It will set the value of the corresponding
option in the DHCP request.
codesearch.debian.net shows no uses (except for the definition in systemd and
elogind).
$ cat > test.c
int main() {
sd_bus_try_close(NULL);
return 0;
}
$ gcc -Isrc/systemd -Wall -o testbus test.c -lsystemd
test.c: In function ‘main’:
test.c:4:3: warning: ‘sd_bus_try_close’ is deprecated [-Wdeprecated-declarations]
4 | sd_bus_try_close(NULL);
| ^~~~~~~~~~~~~~~~
In file included from test.c:1:
src/systemd/sd-bus.h:180:5: note: declared here
180 | int sd_bus_try_close(sd_bus *bus) _sd_deprecated_; /* deprecated */
| ^~~~~~~~~~~~~~~~