config_parse_iaid(), dhcp_identifier_set_iaid() and sd_dhcp6_client_set_iaid() all
allow for the IAID to be zero. Also, RFC 3315 makes no mention that zero
would be invalid.
However, client_ensure_iaid() would take an IAID of zero as a sign that
the values was unset. Fix that by keeping track whether IAID is
initialized.
In certain cases the timeouts may not have been unref'ed before they
need to be re-added. Add the appropriate unref calls to ensure we don't
register the timeout multiple times.
This fixes possible cases where timeouts are triggered multiple times
and even on destroyed DHCPv6 clients.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/73Fixes#10749.
The previous code did htole64() followed by unaligned_write_be32() (the
XOR and shift in between is endianness agnostic). That means, on every
architeture there is always exactly one byte swap and the iaid is
dependent on endianness.
Since dhcp_identifier_set_iaid() is part of the DUID generation
algorithm, this cannot be fixed without changing the client-id.
In particular, as the client-id already depends on the machine-id (and
is thus inherrently host-specific), it is better to stick to the current
behavior.
However, add a parameter to switch between old and new behaviour.
Since the new behavior is unused, the only real purpose of this
change is to self-document the oddity of the function.
Fixes: 933f9caeeb
Arguably, libsystemd-network is (still) entirely internal API.
However there is the aim of maybe exposing it as public API.
For that reason, it cannot include internal headers from
"src/basic/".
Note how files "src/systemd/sd-*.h" don't include any systemd
headers which don't themself have an "sd-" prefix.
Fixes: d89a400ed6
Since we now have the possibility to request prefixes to be delegated
without corresponding IPv6 addresses, it does not make sense to store
lease T1 and T2 timeouts in the otherwise unused IA_NA structure.
Therefore lease timeouts T1 and T2 are moved to the DHCPv6 client
structure, as there will be only one set of stateful timeouts required
by RFC 7550, Section 4.3.
Select T1 and T2 timeouts based on whether addresses or prefixes were
requested and what the server offered. The address and prefix timeouts
values have been computed earlier when the relevant DHCPv6 options were
parsed.
Add function to fetch the IAID for the delegated IA_PD prefix. In
order to keep things simple in the implemntation, the same IAID
is used with IA_NA addresses and IA_PD prefixes. But the DHCPv6
server can choose to return only IA_PD prefixes, and the client
can nowadays omit requesting of IA_NA addresses. Since the function
fetching said IAID from the lease looks only for IA_NA ones, it
will return an empty IAID, which of course does not match the one
set for prefixes.
Fix this by adding a function returning the IAID for the prefix.
Add function to enable/disable IA_NA address requests. Internally
handle the request as a bit mask and add IA_PD prefix delegation
to the same bit mask instead of having a separate boolean. Thus
the calling code can set requests for prefix and address delegation
separately. This is handy when supporting RFC 7084.
Add a check in the code that at least something is requested from
the server in Managed mode. By default request IA_NA addresses from
the DHCPv6 server. Although a value has been defined for IA_TA,
temporay IA_TA addresses are not yet requested.
Add helper function for fetching enabled/disabled state of Prefix
Delegation for a DHCPv6 client. Update function setting prefix
delegation to use an int instead of a boolean.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Ever since the initial implementation in 631bbe7129,
client_parse_message() was supposed to check that the message contains exactly
one serverid. The check that no more than one is given was implemented
correctly, but the check that at least one is given was not. Simplify the whole
thing by making dhcp6_lease_get_serverid() return an error if the id is not
set, and do not require the arguments to be present if the contents of the id
are not needed.
The DHCPv6 client will set its state to DHCP6_STATE_STOPPED if
an error occurs or when receiving an Information Reply DHCPv6
message. Once in DHCP6_STATE_STOPPED, the DHCPv6 client needs
to be restarted by calling sd_dhcp6_client_start().
As of pull request #7796 client_reset() no longer closes the
network socket, thus a call to sd_dhcp6_client_start() needs to
check whether the file descriptor already exists in order not to
create a new one. Likewise, a call to sd_dhcp6_client_unref()
must now close the network socket as client_reset() is not
closing it.
Reported by asavah and Yu Watanabe.
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
The slightly modified review comments say that "...in theory
offsetof(DHCP6Option, data) is nicer than sizeof(DHCP6Option)
because the former removes alignment artifacts. In this
specific case there are no alignment whitespaces hence it's
fine, but out of a matter of principle offsetof() is preferred
over sizeof() in cases like this..."
Compute one set of minimum lifetimes for T1 and T2, i.e. the smaller
ones assigned to IA NA and IA PD. The lifetimes should be the same,
see RFC 7550 for details.
Sanitize code for parsing DHCPv6 IA NA and TA options and their
nested Status options so that the options can be fully and
properly ignored should they not be conformant to the specification.
Do this by defining a proper DHCP6Option structure and sending that
structure to the parsing function. The parsing function will then
not manipulate either any option data pointers or their lengths in
order to iterate over the current option. Needless to say, this
affects a few files including the test program.
Close DHCPv6 client socket file descriptor when
sd_dhcp6_client_stop() is called and not when client_reset() is
called. If left in client_reset(), any internal temporary stopping
of the DHCPv6 client with client_stop() will call client_reset()
after which the DHCPv6 client will not be able to receive any further
DHCPv6 messages.
Similarly, client_start() needs to enable events for the DHCPv6
socket file descriptor since a call to client_stop() will call
client_reset() which will remove it from the main loop. Events should
be turned off when no DHCPv6 messages are expected.
Implement DHCPv6 option to exchange information about the Fully
Qualified Domain Name (FQDN) according to RFC 4704.
The RFC 4704 describes two models of operations in section 3,
currently only the second model is supported (DHCPv6 server
updates both the AAAA and the PTR RRs).
The existing DHCP Section Options SendHostname and Hostname are
sent as FQDN to the server. According to section 4.2 sending
only parts of its FQDN is allowed.
Fixes#4682.
