systemd.exec systemd Developer Lennart Poettering lennart@poettering.net systemd.exec 5 systemd.exec Execution environment configuration service.service, socket.socket, mount.mount, swap.swap Description Unit configuration files for services, sockets, mount points, and swap devices share a subset of configuration options which define the execution environment of spawned processes. This man page lists the configuration options shared by these four unit types. See systemd.unit5 for the common options of all unit configuration files, and systemd.service5, systemd.socket5, systemd.swap5, and systemd.mount5 for more information on the specific unit configuration files. The execution specific configuration options are configured in the [Service], [Socket], [Mount], or [Swap] sections, depending on the unit type. Automatic Dependencies A few execution parameters result in additional, automatic dependencies to be added. Units with WorkingDirectory= or RootDirectory= set automatically gain dependencies of type Requires= and After= on all mount units required to access the specified paths. This is equivalent to having them listed explicitly in RequiresMountsFor=. Similar, units with PrivateTmp= enabled automatically get mount unit dependencies for all mounts required to access /tmp and /var/tmp. Units whose standard output or error output is connected to , or (or their combinations with console output, see below) automatically acquire dependencies of type After= on systemd-journald.socket. Options WorkingDirectory= Takes a directory path relative to the service's root directory specified by RootDirectory=, or the special value ~. Sets the working directory for executed processes. If set to ~, the home directory of the user specified in User= is used. If not set, defaults to the root directory when systemd is running as a system instance and the respective user's home directory if run as user. If the setting is prefixed with the - character, a missing working directory is not considered fatal. If RootDirectory= is not set, then WorkingDirectory= is relative to the root of the system running the service manager. Note that setting this parameter might result in additional dependencies to be added to the unit (see above). RootDirectory= Takes a directory path relative to the host's root directory (i.e. the root of the system running the service manager). Sets the root directory for executed processes, with the chroot2 system call. If this is used, it must be ensured that the process binary and all its auxiliary files are available in the chroot() jail. Note that setting this parameter might result in additional dependencies to be added to the unit (see above). User= Group= Sets the Unix user or group that the processes are executed as, respectively. Takes a single user or group name or ID as argument. If no group is set, the default group of the user is chosen. These do not affect commands prefixed with !. SupplementaryGroups= Sets the supplementary Unix groups the processes are executed as. This takes a space-separated list of group names or IDs. This option may be specified more than once, in which case all listed groups are set as supplementary groups. When the empty string is assigned, the list of supplementary groups is reset, and all assignments prior to this one will have no effect. In any way, this option does not override, but extends the list of supplementary groups configured in the system group database for the user. This does not affect commands prefixed with !. Nice= Sets the default nice level (scheduling priority) for executed processes. Takes an integer between -20 (highest priority) and 19 (lowest priority). See setpriority2 for details. OOMScoreAdjust= Sets the adjustment level for the Out-Of-Memory killer for executed processes. Takes an integer between -1000 (to disable OOM killing for this process) and 1000 (to make killing of this process under memory pressure very likely). See proc.txt for details. IOSchedulingClass= Sets the I/O scheduling class for executed processes. Takes an integer between 0 and 3 or one of the strings , , or . See ioprio_set2 for details. IOSchedulingPriority= Sets the I/O scheduling priority for executed processes. Takes an integer between 0 (highest priority) and 7 (lowest priority). The available priorities depend on the selected I/O scheduling class (see above). See ioprio_set2 for details. CPUSchedulingPolicy= Sets the CPU scheduling policy for executed processes. Takes one of , , , or . See sched_setscheduler2 for details. CPUSchedulingPriority= Sets the CPU scheduling priority for executed processes. The available priority range depends on the selected CPU scheduling policy (see above). For real-time scheduling policies an integer between 1 (lowest priority) and 99 (highest priority) can be used. See sched_setscheduler2 for details. CPUSchedulingResetOnFork= Takes a boolean argument. If true, elevated CPU scheduling priorities and policies will be reset when the executed processes fork, and can hence not leak into child processes. See sched_setscheduler2 for details. Defaults to false. CPUAffinity= Controls the CPU affinity of the executed processes. Takes a list of CPU indices or ranges separated by either whitespace or commas. CPU ranges are specified by the lower and upper CPU indices separated by a dash. This option may be specified more than once, in which case the specified CPU affinity masks are merged. If the empty string is assigned, the mask is reset, all assignments prior to this will have no effect. See sched_setaffinity2 for details. UMask= Controls the file mode creation mask. Takes an access mode in octal notation. See umask2 for details. Defaults to 0022. Environment= Sets environment variables for executed processes. Takes a space-separated list of variable assignments. This option may be specified more than once, in which case all listed variables will be set. If the same variable is set twice, the later setting will override the earlier setting. If the empty string is assigned to this option, the list of environment variables is reset, all prior assignments have no effect. Variable expansion is not performed inside the strings, however, specifier expansion is possible. The $ character has no special meaning. If you need to assign a value containing spaces to a variable, use double quotes (") for the assignment. Example: Environment="VAR1=word1 word2" VAR2=word3 "VAR3=$word 5 6" gives three variables VAR1, VAR2, VAR3 with the values word1 word2, word3, $word 5 6. See environ7 for details about environment variables. EnvironmentFile= Similar to Environment= but reads the environment variables from a text file. The text file should contain new-line-separated variable assignments. Empty lines, lines without an = separator, or lines starting with ; or # will be ignored, which may be used for commenting. A line ending with a backslash will be concatenated with the following one, allowing multiline variable definitions. The parser strips leading and trailing whitespace from the values of assignments, unless you use double quotes ("). The argument passed should be an absolute filename or wildcard expression, optionally prefixed with -, which indicates that if the file does not exist, it will not be read and no error or warning message is logged. This option may be specified more than once in which case all specified files are read. If the empty string is assigned to this option, the list of file to read is reset, all prior assignments have no effect. The files listed with this directive will be read shortly before the process is executed (more specifically, after all processes from a previous unit state terminated. This means you can generate these files in one unit state, and read it with this option in the next). Settings from these files override settings made with Environment=. If the same variable is set twice from these files, the files will be read in the order they are specified and the later setting will override the earlier setting. PassEnvironment= Pass environment variables from the systemd system manager to executed processes. Takes a space-separated list of variable names. This option may be specified more than once, in which case all listed variables will be set. If the empty string is assigned to this option, the list of environment variables is reset, all prior assignments have no effect. Variables that are not set in the system manager will not be passed and will be silently ignored. Variables passed from this setting are overridden by those passed from Environment= or EnvironmentFile=. Example: PassEnvironment=VAR1 VAR2 VAR3 passes three variables VAR1, VAR2, VAR3 with the values set for those variables in PID1. See environ7 for details about environment variables. StandardInput= Controls where file descriptor 0 (STDIN) of the executed processes is connected to. Takes one of , , , or . If is selected, standard input will be connected to /dev/null, i.e. all read attempts by the process will result in immediate EOF. If is selected, standard input is connected to a TTY (as configured by TTYPath=, see below) and the executed process becomes the controlling process of the terminal. If the terminal is already being controlled by another process, the executed process waits until the current controlling process releases the terminal. is similar to , but the executed process is forcefully and immediately made the controlling process of the terminal, potentially removing previous controlling processes from the terminal. is similar to but if the terminal already has a controlling process start-up of the executed process fails. The option is only valid in socket-activated services, and only when the socket configuration file (see systemd.socket5 for details) specifies a single socket only. If this option is set, standard input will be connected to the socket the service was activated from, which is primarily useful for compatibility with daemons designed for use with the traditional inetd8 daemon. This setting defaults to . StandardOutput= Controls where file descriptor 1 (STDOUT) of the executed processes is connected to. Takes one of , , , , , , , , or . duplicates the file descriptor of standard input for standard output. connects standard output to /dev/null, i.e. everything written to it will be lost. connects standard output to a tty (as configured via TTYPath=, see below). If the TTY is used for output only, the executed process will not become the controlling process of the terminal, and will not fail or wait for other processes to release the terminal. connects standard output with the journal which is accessible via journalctl1. Note that everything that is written to syslog or kmsg (see below) is implicitly stored in the journal as well, the specific two options listed below are hence supersets of this one. connects standard output to the syslog3 system syslog service, in addition to the journal. Note that the journal daemon is usually configured to forward everything it receives to syslog anyway, in which case this option is no different from . connects standard output with the kernel log buffer which is accessible via dmesg1, in addition to the journal. The journal daemon might be configured to send all logs to kmsg anyway, in which case this option is no different from . , and work in a similar way as the three options above but copy the output to the system console as well. connects standard output to a socket acquired via socket activation. The semantics are similar to the same option of StandardInput=. If the standard output (or error output, see below) of a unit is connected to the journal, syslog or the kernel log buffer, the unit will implicitly gain a dependency of type After= on systemd-journald.socket (also see the automatic dependencies section above). This setting defaults to the value set with in systemd-system.conf5, which defaults to . Note that setting this parameter might result in additional dependencies to be added to the unit (see above). StandardError= Controls where file descriptor 2 (STDERR) of the executed processes is connected to. The available options are identical to those of StandardOutput=, with one exception: if set to the file descriptor used for standard output is duplicated for standard error. This setting defaults to the value set with in systemd-system.conf5, which defaults to . Note that setting this parameter might result in additional dependencies to be added to the unit (see above). TTYPath= Sets the terminal device node to use if standard input, output, or error are connected to a TTY (see above). Defaults to /dev/console. TTYReset= Reset the terminal device specified with TTYPath= before and after execution. Defaults to no. TTYVHangup= Disconnect all clients which have opened the terminal device specified with TTYPath= before and after execution. Defaults to no. TTYVTDisallocate= If the terminal device specified with TTYPath= is a virtual console terminal, try to deallocate the TTY before and after execution. This ensures that the screen and scrollback buffer is cleared. Defaults to no. SyslogIdentifier= Sets the process name to prefix log lines sent to the logging system or the kernel log buffer with. If not set, defaults to the process name of the executed process. This option is only useful when StandardOutput= or StandardError= are set to , or (or to the same settings in combination with ). SyslogFacility= Sets the syslog facility to use when logging to syslog. One of , , , , , , , , , , , , , , , , , , or . See syslog3 for details. This option is only useful when StandardOutput= or StandardError= are set to . Defaults to . SyslogLevel= The default syslog level to use when logging to syslog or the kernel log buffer. One of , , , , , , , . See syslog3 for details. This option is only useful when StandardOutput= or StandardError= are set to or . Note that individual lines output by the daemon might be prefixed with a different log level which can be used to override the default log level specified here. The interpretation of these prefixes may be disabled with SyslogLevelPrefix=, see below. For details, see sd-daemon3. Defaults to . SyslogLevelPrefix= Takes a boolean argument. If true and StandardOutput= or StandardError= are set to , or , log lines written by the executed process that are prefixed with a log level will be passed on to syslog with this log level set but the prefix removed. If set to false, the interpretation of these prefixes is disabled and the logged lines are passed on as-is. For details about this prefixing see sd-daemon3. Defaults to true. TimerSlackNSec= Sets the timer slack in nanoseconds for the executed processes. The timer slack controls the accuracy of wake-ups triggered by timers. See prctl2 for more information. Note that in contrast to most other time span definitions this parameter takes an integer value in nano-seconds if no unit is specified. The usual time units are understood too. LimitCPU= LimitFSIZE= LimitDATA= LimitSTACK= LimitCORE= LimitRSS= LimitNOFILE= LimitAS= LimitNPROC= LimitMEMLOCK= LimitLOCKS= LimitSIGPENDING= LimitMSGQUEUE= LimitNICE= LimitRTPRIO= LimitRTTIME= Set soft and hard limits on various resources for executed processes. See setrlimit2 for details on the resource limit concept. Resource limits may be specified in two formats: either as single value to set a specific soft and hard limit to the same value, or as colon-separated pair to set both limits individually (e.g. LimitAS=4G:16G). Use the string infinity to configure no limit on a specific resource. The multiplicative suffixes K, M, G, T, P and E (to the base 1024) may be used for resource limits measured in bytes (e.g. LimitAS=16G). For the limits referring to time values, the usual time units ms, s, min, h and so on may be used (see systemd.time7 for details). Note that if no time unit is specified for LimitCPU= the default unit of seconds is implied, while for LimitRTTIME= the default unit of microseconds is implied. Also, note that the effective granularity of the limits might influence their enforcement. For example, time limits specified for LimitCPU= will be rounded up implicitly to multiples of 1s. For LimitNICE= the value may be specified in two syntaxes: if prefixed with + or -, the value is understood as regular Linux nice value in the range -20..19. If not prefixed like this the value is understood as raw resource limit parameter in the range 0..40 (with 0 being equivalent to 1). Note that most process resource limits configured with these options are per-process, and processes may fork in order to acquire a new set of resources that are accounted independently of the original process, and may thus escape limits set. Also note that LimitRSS= is not implemented on Linux, and setting it has no effect. Often it is advisable to prefer the resource controls listed in systemd.resource-control5 over these per-process limits, as they apply to services as a whole, may be altered dynamically at runtime, and are generally more expressive. For example, MemoryLimit= is a more powerful (and working) replacement for LimitRSS=. Limit directives and their equivalent with ulimit Directive ulimit equivalent Unit LimitCPU= ulimit -t Seconds LimitFSIZE= ulimit -f Bytes LimitDATA= ulimit -d Bytes LimitSTACK= ulimit -s Bytes LimitCORE= ulimit -c Bytes LimitRSS= ulimit -m Bytes LimitNOFILE= ulimit -n Number of File Descriptors LimitAS= ulimit -v Bytes LimitNPROC= ulimit -u Number of Processes LimitMEMLOCK= ulimit -l Bytes LimitLOCKS= ulimit -x Number of Locks LimitSIGPENDING= ulimit -i Number of Queued Signals LimitMSGQUEUE= ulimit -q Bytes LimitNICE= ulimit -e Nice Level LimitRTPRIO= ulimit -r Realtime Priority LimitRTTIME= No equivalent Microseconds
PAMName= Sets the PAM service name to set up a session as. If set, the executed process will be registered as a PAM session under the specified service name. This is only useful in conjunction with the User= setting. If not set, no PAM session will be opened for the executed processes. See pam8 for details. CapabilityBoundingSet= Controls which capabilities to include in the capability bounding set for the executed process. See capabilities7 for details. Takes a whitespace-separated list of capability names as read by cap_from_name3, e.g. CAP_SYS_ADMIN, CAP_DAC_OVERRIDE, CAP_SYS_PTRACE. Capabilities listed will be included in the bounding set, all others are removed. If the list of capabilities is prefixed with ~, all but the listed capabilities will be included, the effect of the assignment inverted. Note that this option also affects the respective capabilities in the effective, permitted and inheritable capability sets. If this option is not used, the capability bounding set is not modified on process execution, hence no limits on the capabilities of the process are enforced. This option may appear more than once, in which case the bounding sets are merged. If the empty string is assigned to this option, the bounding set is reset to the empty capability set, and all prior settings have no effect. If set to ~ (without any further argument), the bounding set is reset to the full set of available capabilities, also undoing any previous settings. This does not affect commands prefixed with !. AmbientCapabilities= Controls which capabilities to include in the ambient capability set for the executed process. Takes a whitespace-separated list of capability names as read by cap_from_name3, e.g. CAP_SYS_ADMIN, CAP_DAC_OVERRIDE, CAP_SYS_PTRACE. This option may appear more than once in which case the ambient capability sets are merged. If the list of capabilities is prefixed with ~, all but the listed capabilities will be included, the effect of the assignment inverted. If the empty string is assigned to this option, the ambient capability set is reset to the empty capability set, and all prior settings have no effect. If set to ~ (without any further argument), the ambient capability set is reset to the full set of available capabilities, also undoing any previous settings. Note that adding capabilities to ambient capability set adds them to the process's inherited capability set. Ambient capability sets are useful if you want to execute a process as a non-privileged user but still want to give it some capabilities. Note that in this case option keep-caps is automatically added to SecureBits= to retain the capabilities over the user change. AmbientCapabilities= does not affect commands prefixed with !. SecureBits= Controls the secure bits set for the executed process. Takes a space-separated combination of options from the following list: , , , , , and . This option may appear more than once, in which case the secure bits are ORed. If the empty string is assigned to this option, the bits are reset to 0. This does not affect commands prefixed with !. See capabilities7 for details. ReadWriteDirectories= ReadOnlyDirectories= InaccessibleDirectories= Sets up a new file system namespace for executed processes. These options may be used to limit access a process might have to the main file system hierarchy. Each setting takes a space-separated list of directory paths relative to the host's root directory (i.e. the system running the service manager). Directories listed in ReadWriteDirectories= are accessible from within the namespace with the same access rights as from outside. Directories listed in ReadOnlyDirectories= are accessible for reading only, writing will be refused even if the usual file access controls would permit this. Directories listed in InaccessibleDirectories= will be made inaccessible for processes inside the namespace, and may not countain any other mountpoints, including those specified by ReadWriteDirectories= or ReadOnlyDirectories=. Note that restricting access with these options does not extend to submounts of a directory that are created later on. These options may be specified more than once, in which case all directories listed will have limited access from within the namespace. If the empty string is assigned to this option, the specific list is reset, and all prior assignments have no effect. Paths in ReadOnlyDirectories= and InaccessibleDirectories= may be prefixed with -, in which case they will be ignored when they do not exist. Note that using this setting will disconnect propagation of mounts from the service to the host (propagation in the opposite direction continues to work). This means that this setting may not be used for services which shall be able to install mount points in the main mount namespace. PrivateTmp= Takes a boolean argument. If true, sets up a new file system namespace for the executed processes and mounts private /tmp and /var/tmp directories inside it that is not shared by processes outside of the namespace. This is useful to secure access to temporary files of the process, but makes sharing between processes via /tmp or /var/tmp impossible. If this is enabled, all temporary files created by a service in these directories will be removed after the service is stopped. Defaults to false. It is possible to run two or more units within the same private /tmp and /var/tmp namespace by using the JoinsNamespaceOf= directive, see systemd.unit5 for details. Note that using this setting will disconnect propagation of mounts from the service to the host (propagation in the opposite direction continues to work). This means that this setting may not be used for services which shall be able to install mount points in the main mount namespace. PrivateDevices= Takes a boolean argument. If true, sets up a new /dev namespace for the executed processes and only adds API pseudo devices such as /dev/null, /dev/zero or /dev/random (as well as the pseudo TTY subsystem) to it, but no physical devices such as /dev/sda. This is useful to securely turn off physical device access by the executed process. Defaults to false. Enabling this option will also remove CAP_MKNOD from the capability bounding set for the unit (see above), and set DevicePolicy=closed (see systemd.resource-control5 for details). Note that using this setting will disconnect propagation of mounts from the service to the host (propagation in the opposite direction continues to work). This means that this setting may not be used for services which shall be able to install mount points in the main mount namespace. The /dev namespace will be mounted read-only and 'noexec'. The latter may break old programs which try to set up executable memory by using mmap2 of /dev/zero instead of using MAP_ANON. PrivateNetwork= Takes a boolean argument. If true, sets up a new network namespace for the executed processes and configures only the loopback network device lo inside it. No other network devices will be available to the executed process. This is useful to securely turn off network access by the executed process. Defaults to false. It is possible to run two or more units within the same private network namespace by using the JoinsNamespaceOf= directive, see systemd.unit5 for details. Note that this option will disconnect all socket families from the host, this includes AF_NETLINK and AF_UNIX. The latter has the effect that AF_UNIX sockets in the abstract socket namespace will become unavailable to the processes (however, those located in the file system will continue to be accessible). ProtectSystem= Takes a boolean argument or full. If true, mounts the /usr and /boot directories read-only for processes invoked by this unit. If set to full, the /etc directory is mounted read-only, too. This setting ensures that any modification of the vendor-supplied operating system (and optionally its configuration) is prohibited for the service. It is recommended to enable this setting for all long-running services, unless they are involved with system updates or need to modify the operating system in other ways. Note however that processes retaining the CAP_SYS_ADMIN capability can undo the effect of this setting. This setting is hence particularly useful for daemons which have this capability removed, for example with CapabilityBoundingSet=. Defaults to off. ProtectHome= Takes a boolean argument or read-only. If true, the directories /home, /root and /run/user are made inaccessible and empty for processes invoked by this unit. If set to read-only, the three directories are made read-only instead. It is recommended to enable this setting for all long-running services (in particular network-facing ones), to ensure they cannot get access to private user data, unless the services actually require access to the user's private data. Note however that processes retaining the CAP_SYS_ADMIN capability can undo the effect of this setting. This setting is hence particularly useful for daemons which have this capability removed, for example with CapabilityBoundingSet=. Defaults to off. MountFlags= Takes a mount propagation flag: , or , which control whether mounts in the file system namespace set up for this unit's processes will receive or propagate mounts or unmounts. See mount2 for details. Defaults to . Use to ensure that mounts and unmounts are propagated from the host to the container and vice versa. Use to run processes so that none of their mounts and unmounts will propagate to the host. Use to also ensure that no mounts and unmounts from the host will propagate into the unit processes' namespace. Note that means that file systems mounted on the host might stay mounted continuously in the unit's namespace, and thus keep the device busy. Note that the file system namespace related options (PrivateTmp=, PrivateDevices=, ProtectSystem=, ProtectHome=, ReadOnlyDirectories=, InaccessibleDirectories= and ReadWriteDirectories=) require that mount and unmount propagation from the unit's file system namespace is disabled, and hence downgrade to . UtmpIdentifier= Takes a four character identifier string for an utmp5 and wtmp entry for this service. This should only be set for services such as getty implementations (such as agetty8) where utmp/wtmp entries must be created and cleared before and after execution, or for services that shall be executed as if they were run by a getty process (see below). If the configured string is longer than four characters, it is truncated and the terminal four characters are used. This setting interprets %I style string replacements. This setting is unset by default, i.e. no utmp/wtmp entries are created or cleaned up for this service. UtmpMode= Takes one of init, login or user. If UtmpIdentifier= is set, controls which type of utmp5/wtmp entries for this service are generated. This setting has no effect unless UtmpIdentifier= is set too. If init is set, only an INIT_PROCESS entry is generated and the invoked process must implement a getty-compatible utmp/wtmp logic. If login is set, first an INIT_PROCESS entry, followed by a LOGIN_PROCESS entry is generated. In this case, the invoked process must implement a login1-compatible utmp/wtmp logic. If user is set, first an INIT_PROCESS entry, then a LOGIN_PROCESS entry and finally a USER_PROCESS entry is generated. In this case, the invoked process may be any process that is suitable to be run as session leader. Defaults to init. SELinuxContext= Set the SELinux security context of the executed process. If set, this will override the automated domain transition. However, the policy still needs to authorize the transition. This directive is ignored if SELinux is disabled. If prefixed by -, all errors will be ignored. This does not affect commands prefixed with !. See setexeccon3 for details. AppArmorProfile= Takes a profile name as argument. The process executed by the unit will switch to this profile when started. Profiles must already be loaded in the kernel, or the unit will fail. This result in a non operation if AppArmor is not enabled. If prefixed by -, all errors will be ignored. This does not affect commands prefixed with !. SmackProcessLabel= Takes a security label as argument. The process executed by the unit will be started under this label and SMACK will decide whether the process is allowed to run or not, based on it. The process will continue to run under the label specified here unless the executable has its own label, in which case the process will transition to run under that label. When not specified, the label that systemd is running under is used. This directive is ignored if SMACK is disabled. The value may be prefixed by -, in which case all errors will be ignored. An empty value may be specified to unset previous assignments. This does not affect commands prefixed with !. IgnoreSIGPIPE= Takes a boolean argument. If true, causes SIGPIPE to be ignored in the executed process. Defaults to true because SIGPIPE generally is useful only in shell pipelines. NoNewPrivileges= Takes a boolean argument. If true, ensures that the service process and all its children can never gain new privileges. This option is more powerful than the respective secure bits flags (see above), as it also prohibits UID changes of any kind. This is the simplest, most effective way to ensure that a process and its children can never elevate privileges again. SystemCallFilter= Takes a space-separated list of system call names. If this setting is used, all system calls executed by the unit processes except for the listed ones will result in immediate process termination with the SIGSYS signal (whitelisting). If the first character of the list is ~, the effect is inverted: only the listed system calls will result in immediate process termination (blacklisting). If running in user mode, or in system mode, but without the CAP_SYS_ADMIN capability (e.g. setting User=nobody), NoNewPrivileges=yes is implied. This feature makes use of the Secure Computing Mode 2 interfaces of the kernel ('seccomp filtering') and is useful for enforcing a minimal sandboxing environment. Note that the execve, rt_sigreturn, sigreturn, exit_group, exit system calls are implicitly whitelisted and do not need to be listed explicitly. This option may be specified more than once, in which case the filter masks are merged. If the empty string is assigned, the filter is reset, all prior assignments will have no effect. This does not affect commands prefixed with !. If you specify both types of this option (i.e. whitelisting and blacklisting), the first encountered will take precedence and will dictate the default action (termination or approval of a system call). Then the next occurrences of this option will add or delete the listed system calls from the set of the filtered system calls, depending of its type and the default action. (For example, if you have started with a whitelisting of read and write, and right after it add a blacklisting of write, then write will be removed from the set.) As the number of possible system calls is large, predefined sets of system calls are provided. A set starts with @ character, followed by name of the set. Currently predefined system call sets Set Description @clock System calls for changing the system clock (adjtimex(), settimeofday()) @io-event Event loop use (poll(), select(), epoll7, eventfd()...) @ipc SysV IPC, POSIX Message Queues or other IPC (mq_overview7, svipc7) @module Kernel module control (create_module(), init_module()...) @mount File system mounting and unmounting (chroot(), mount()...) @network-io Socket I/O (including local AF_UNIX): socket7, unix7 @obsolete Unusual, obsolete or unimplemented (fattach(), gtty(), vm86()...) @privileged All system calls which need superuser capabilities (capabilities7) @process Process control, execution, namespaces (execve(), kill(), namespaces7...) @raw-io Raw I/O ports (ioperm(), iopl(), pciconfig_read()...)
Note, that as new system calls are added to the kernel, additional system calls might be added to the groups above, so the contents of the sets may change between systemd versions.
SystemCallErrorNumber= Takes an errno error number name to return when the system call filter configured with SystemCallFilter= is triggered, instead of terminating the process immediately. Takes an error name such as EPERM, EACCES or EUCLEAN. When this setting is not used, or when the empty string is assigned, the process will be terminated immediately when the filter is triggered. SystemCallArchitectures= Takes a space-separated list of architecture identifiers to include in the system call filter. The known architecture identifiers are x86, x86-64, x32, arm as well as the special identifier native. Only system calls of the specified architectures will be permitted to processes of this unit. This is an effective way to disable compatibility with non-native architectures for processes, for example to prohibit execution of 32-bit x86 binaries on 64-bit x86-64 systems. The special native identifier implicitly maps to the native architecture of the system (or more strictly: to the architecture the system manager is compiled for). If running in user mode, or in system mode, but without the CAP_SYS_ADMIN capability (e.g. setting User=nobody), NoNewPrivileges=yes is implied. Note that setting this option to a non-empty list implies that native is included too. By default, this option is set to the empty list, i.e. no architecture system call filtering is applied. RestrictAddressFamilies= Restricts the set of socket address families accessible to the processes of this unit. Takes a space-separated list of address family names to whitelist, such as AF_UNIX, AF_INET or AF_INET6. When prefixed with ~ the listed address families will be applied as blacklist, otherwise as whitelist. Note that this restricts access to the socket2 system call only. Sockets passed into the process by other means (for example, by using socket activation with socket units, see systemd.socket5) are unaffected. Also, sockets created with socketpair() (which creates connected AF_UNIX sockets only) are unaffected. Note that this option has no effect on 32-bit x86 and is ignored (but works correctly on x86-64). If running in user mode, or in system mode, but without the CAP_SYS_ADMIN capability (e.g. setting User=nobody), NoNewPrivileges=yes is implied. By default, no restriction applies, all address families are accessible to processes. If assigned the empty string, any previous list changes are undone. Use this option to limit exposure of processes to remote systems, in particular via exotic network protocols. Note that in most cases, the local AF_UNIX address family should be included in the configured whitelist as it is frequently used for local communication, including for syslog2 logging. This does not affect commands prefixed with !. Personality= Controls which kernel architecture uname2 shall report, when invoked by unit processes. Takes one of the architecture identifiers x86, x86-64, ppc, ppc-le, ppc64, ppc64-le, s390 or s390x. Which personality architectures are supported depends on the system architecture. Usually the 64bit versions of the various system architectures support their immediate 32bit personality architecture counterpart, but no others. For example, x86-64 systems support the x86-64 and x86 personalities but no others. The personality feature is useful when running 32-bit services on a 64-bit host system. If not specified, the personality is left unmodified and thus reflects the personality of the host system's kernel. RuntimeDirectory= RuntimeDirectoryMode= Takes a list of directory names. If set, one or more directories by the specified names will be created below /run (for system services) or below $XDG_RUNTIME_DIR (for user services) when the unit is started, and removed when the unit is stopped. The directories will have the access mode specified in RuntimeDirectoryMode=, and will be owned by the user and group specified in User= and Group=. Use this to manage one or more runtime directories of the unit and bind their lifetime to the daemon runtime. The specified directory names must be relative, and may not include a /, i.e. must refer to simple directories to create or remove. This is particularly useful for unprivileged daemons that cannot create runtime directories in /run due to lack of privileges, and to make sure the runtime directory is cleaned up automatically after use. For runtime directories that require more complex or different configuration or lifetime guarantees, please consider using tmpfiles.d5. MemoryDenyWriteExecute= Takes a boolean argument. If set, attempts to create memory mappings that are writable and executable at the same time, or to change existing memory mappings to become executable are prohibited. Specifically, a system call filter is added that rejects mmap2 system calls with both PROT_EXEC and PROT_WRITE set and mprotect2 system calls with PROT_EXEC set. Note that this option is incompatible with programs that generate program code dynamically at runtime, such as JIT execution engines, or programs compiled making use of the code "trampoline" feature of various C compilers. This option improves service security, as it makes harder for software exploits to change running code dynamically.
Environment variables in spawned processes Processes started by the system are executed in a clean environment in which select variables listed below are set. System processes started by systemd do not inherit variables from PID 1, but processes started by user systemd instances inherit all environment variables from the user systemd instance. $PATH Colon-separated list of directories to use when launching executables. Systemd uses a fixed value of /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin. $LANG Locale. Can be set in locale.conf5 or on the kernel command line (see systemd1 and kernel-command-line7). $USER $LOGNAME $HOME $SHELL User name (twice), home directory, and the login shell. The variables are set for the units that have User= set, which includes user systemd instances. See passwd5. $XDG_RUNTIME_DIR The directory for volatile state. Set for the user systemd instance, and also in user sessions. See pam_systemd8. $XDG_SESSION_ID $XDG_SEAT $XDG_VTNR The identifier of the session, the seat name, and virtual terminal of the session. Set by pam_systemd8 for login sessions. $XDG_SEAT and $XDG_VTNR will only be set when attached to a seat and a tty. $MAINPID The PID of the units main process if it is known. This is only set for control processes as invoked by ExecReload= and similar. $MANAGERPID The PID of the user systemd instance, set for processes spawned by it. $LISTEN_FDS $LISTEN_PID $LISTEN_FDNAMES Information about file descriptors passed to a service for socket activation. See sd_listen_fds3. $NOTIFY_SOCKET The socket sd_notify() talks to. See sd_notify3. $WATCHDOG_PID $WATCHDOG_USEC Information about watchdog keep-alive notifications. See sd_watchdog_enabled3. $TERM Terminal type, set only for units connected to a terminal (StandardInput=tty, StandardOutput=tty, or StandardError=tty). See termcap5. Additional variables may be configured by the following means: for processes spawned in specific units, use the Environment=, EnvironmentFile= and PassEnvironment= options above; to specify variables globally, use DefaultEnvironment= (see systemd-system.conf5) or the kernel option systemd.setenv= (see systemd1). Additional variables may also be set through PAM, cf. pam_env8. See Also systemd1, systemctl1, journalctl8, systemd.unit5, systemd.service5, systemd.socket5, systemd.swap5, systemd.mount5, systemd.kill5, systemd.resource-control5, systemd.time7, systemd.directives7, tmpfiles.d5, exec3