This makes it easier to add substitutions to man pages,
avoiding the separate transformation step.
mkdir -p's are removed from the rule, because xsltproc will
will create directories on it's own.
All in all, two or three forks per man page are avoided,
which should make things marginally faster.
Unfortunately python parsers must too be tweaked to handle
entities. This isn't particularly easy: with lxml a custom
Resolver can be used, but the stdlib etree doesn't support
external entities *at all*. So when running without lxml,
the entities are just removed. Right now it doesn't matter,
since the entities are not indexed anyway. But I intend to
add indexing of filenames in the near future, and then the
index generated without lxml might be missing a few lines.
Oh well.
adds test of:
strv_find
strv_find_prefix
strv_overlap
strv_sort
streq_ptr
first_word
Splits tests of util.c into own file to avoid clutter as we add more.
Removed a few prints and uses _cleanup_free_ to make the tests more focused.
This allows us to print simple performance data of all parts of the boot now:
- firmware
- boot loader
- kernel
- initrd
- userspace
This only works for bootloaders which support passing TSC data via EFI
variables. As of now that's only gummiboot.
This saves test output to individual .log files.
The driver is only used in /Makefile.am, not in
/docs/*udev/Makefile.am because the latter don't seem to work with
this driver. They don't produce much output anyway.
.gitignore is alphabetized, and .log files are added to it.
Generated files from /build-aux are removed from the list.
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
When traversing entry array chains for a bisection or for retrieving an
item by index we previously always started at the beginning of the
chain. Since we tend to look at the same chains repeatedly, let's cache
where we have been the last time, and maybe we can skip ahead with this
the next time.
This turns most bisections and index lookups from O(log(n)*log(n)) into
O(log(n)). More importantly however, we seek around on disk much less,
which is good to reduce buffer cache and seek times on rotational disks.
Much like logind has a client in loginctl, and journald in journalctl
introduce timedatectl, to change the system time (incl. RTC), timezones
and related settings.
Valgrind says:
==29176== Conditional jump or move depends on uninitialised value(s)
==29176== at 0x412A85: cunescape_length_with_prefix (util.c:1565)
==29176== by 0x40B351: dev_kmsg_record (journald-kmsg.c:301)
==29176== by 0x40B653: server_read_dev_kmsg (journald-kmsg.c:347)
==29176== by 0x40B701: server_flush_dev_kmsg (journald-kmsg.c:365)
==29176== by 0x409DE7: main (journald.c:1535)
This minimal HTTP server can serve journal data via HTTP. Its primary
purpose is synchronization of journal data across the network. It serves
journal data in three formats:
text/plain: the text format known from /var/log/messages
application/json: the journal entries formatted as JSON
application/vnd.fdo.journal: the binary export format of the journal
The HTTP server also serves a small HTML5 app that makes use of the JSON
serialization to present the journal data to the user.
Examples:
This downloads the journal in text format:
# systemctl start systemd-journal-gatewayd.service
# wget http://localhost:19531/entries
Same for JSON:
# curl -H"Accept: application/json" http://localhost:19531/entries
Access via web browser:
$ firefox http://localhost:19531/
we now can take multiple matches, and they will apply as AND if they
apply to different fields and OR if they apply to the same fields. Also,
terms of this kind can be combined with an overreaching OR.
This makes sure that
systemctl status /home
is implicitly translated to:
systemctl status /home.mount
Similar, /dev/foobar becomes dev-foobar.device.
Also, all characters that cannot be part of a unit name are implicitly
escaped.
since the binaries share much of the same code and we better load only
one binary instead of two from disk at early boot let's merge the three
readahead binaries into one. This also allows us to drop a lot of
duplicated code.
This adds minimal hardware watchdog support to PID 1. The idea is that
PID 1 supervises and watchdogs system services, while the hardware
watchdog is used to supervise PID 1.
This adds two hardware watchdog configuration options, for the runtime
watchdog and for a shutdown watchdog. The former is active during normal
operation, the latter only at reboots to ensure that if a clean reboot
times out we reboot nonetheless.
If the runtime watchdog is enabled PID 1 will automatically wake up at
half the configured interval and write to the watchdog daemon.
By default we enable the shutdown watchdog, but leave the runtime
watchdog disabled in order not to break independent hardware watchdog
daemons people might be using.
This is only the most basic hookup. If necessary we can later on hook
up the watchdog ping more closely with services deemed crucial.
This logic can be turned off by defining SD_JOURNAL_SUPPRESS_LOCATION
before including sd-journal.h.
This also saves/restores errno in all logging functions, in order to be
useful as logging calls without side-effects.
This also adds a couple of __unlikely__ around the early checks in the
logging calls, in order to minimize the runtime impact.
Let's make things a bit easier to type, drop the systemd- prefix for
journalctl and loginctl, but provide the old names for compat.
All systemd binaries are hence now prefixed with "systemd-" with the
exception of the three primary user interface binaries:
systemctl
loginctl
journalctl
For those three we do provide systemd-xyz names as well, via symlinks:
systemd-systemctl → systemctl
systemd-loginctl → loginctl
systemd-journalctl → journalctl
We do this only for the *primary* user tools, in order to avoid
unnecessary namespace problems. That means tools like systemd-notify
stay the way they are.
In preparation for https://bugzilla.gnome.org/show_bug.cgi?id=655380 we
decided it's better to include the multi-seat X wrapper in systemd,
rather than gdm. (Side effect: this makes this accessible for other
DMs)
This is a stop-gap for now, until X gins proper multi-seat graphics
support at which point this code will go away without replacement.
This new installer will replace the current code of "systemctl enable"
but also be available via D-Bus. It adds a couple of new features:
- Mask/Unmask calls
- Reenable call
- Preset call
- Support for enabling units temporarily (i.e. in /run/systemd instead
of /etc/systemd)
- Enumeration of installed units
- Support for out-of-search-path units
systemctl and D-Bus are not hooked up with this yet
This adds support for executing systemctl operations remotely or as
privileged user while still running systemctl itself unprivileged and
locally.
This currently requires a D-Bus patch to work properly.
https://bugs.freedesktop.org/show_bug.cgi?id=35230
This is supposed to play the same roles /var/lib/dbus/machine-id,
however fixes a couple of problems:
- It is available during early boot since it is stored in /etc
- Removes the ID from the D-Bus context and moves it into a system
context, thus hopefully lowering hesitation by people to use it.
- It is generated at installation time. If the file is empty at boot
time it will be mounted over with a randomly generated ID, which is
not saved to disk. This is useful to support state-less machines with
no transient or writable /etc configuration.
This functions will:
- umount all mount points that aren't API
- remount read-only all mount points that can't be umounted
- umount all swap devices.
- detach all loopback devices
TODO:
- umount dms
Mountpoints are being read from /proc/self/mountinfo.
Swaps are being read from /proc/swaps.
Loop devices from /sys/class/block/loop*.
In order to unify configuration across distributions we pick the
simple-most option by default (Debian's /etc/hostname) and then fall
back to distro-specific hacks if that doesn't exist.
